Knight Anvil Workstation User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Anvil Workstation

Page 1
Assembly Instructions
knightgroup.co.nz
Anvil Workstation
• To prevent possible scratches or damage, assemble
the workstation upside down on a soft surface such as
a blanket, carpet or packaging.
• Attach leg to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1 Step 2
Page 2
Assembly Instructions
Assemble frames & rails together, loosely
(1 turn from tight).
Fix desk top with 5mm overhang over metal frame.
Lastly, fully tighten all rail to frame screws.
Completed
Anvil Workstation
Desk Top
Leg
Frame
Self-tapping
Screw
5mm
Desk Top
Desk
Back Rail
Screw
5mm

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Position the modesty panels behind the rail. Fully tighten the modesty panels to the rails with
provided screws.
Step 4Step 3
Completed
Anvil Workstation with Modesty Panels (Optional)