Knight Anvil Bar Leaner User manual

Tools Required:
Assembly Instructions
Powered screwdriver.
Anvil Bar Leaner

knightgroup.co.nz
Page 2
Assembly Instructions
· To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
· Attach Leg to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step
Anvil Eclipse Bar Leaner

knightgroup.co.nz
Page 3
Assembly Instructions
Step 1
Step 2
Fully tighten frames to the rails with provided screws.
Loosely assembly frames with rails together.
Anvil Eclipse Bar Leaner

knightgroup.co.nz
Page 4
Assembly Instructions
Using two people, carefully set the desk upright and position.
Completed
Fix desk frame to worktop, allowing for a 5mm overhang on all sides. Fully tighten with provided
screws.
Step 3
Anvil Eclipse Bar Leaner