Knight Urban Mesh User manual

knightgroup.co.nz
Assembly Instructions
Urban Mesh

knightgroup.co.nz
Assembly Instructions
Urban Mesh
Backrest
Seat with Mech
attached
Gas Lift
Star Base
Castors
Optional Arms
PARTS KEY:
Warning: Failure to follow these assembly instructions can result in product failure, personal injury or property damage.

knightgroup.co.nz
Assembly Instructions
Urban Mesh
Place chair base upright on floor, stabilizing it so it
does not move or slide. Insert gas lift cylinder into hole
through chair base.
Remove cap from top of gas lift and carefully place
seat assembly onto gas lift cylinder, fitting the cylinder
into the hole in bottom of seat mechanism. Press down
firmly.
Attach the optional arms using the screws provided.
Place the chair back into the seat mechanism, and
tighten knob at the desired height. Before making any
other adjustments, sit firmly on the chair to complete
assembly.
Step 1
Step 3
Step 2
Step 4