KOBE RA9230SQB-1 Use and care manual

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 5
Version 20160725
RA92 SQB-1 Parts Location and Replacement
This basic guide is to show the parts location of the RA92 SQB-1 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For 30” wall mount models: RA9230SQB-1, RA9230SQB-DC30-1, RA9230SQB-DC46-1
For 36” wall mount models: RA9236SQB-1, RA9236SQB-DC30-1, RA9236SQB-DC46-1
Overall Snapshot of RA92 SQB-1
1. Blower System (Manual Part #7 –See “Parts List” page on manual)
2. Control Panel (Manual Part #5–See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #4 –See “Parts List” page on manual)
2
1
3
3
All manuals and user guides at all-guides.com

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 2 of 5
Version 20160725
Removing the Capacitor Support
Figure 1 Figure 2
Figure 3
4. Capacitor Support (Manual Part #8 –See “Parts List” page on manual)
4
4
4
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. When pulling the wires from the capacitor support, press the ‘push
release’ at the back of the cord.
All manuals and user guides at all-guides.com

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 3 of 5
Version 20160725
Accessing the Capacitor and Processor Board
5. Capacitor (Manual Part #10 –See “Parts List” page on manual)
6. Processor Board (Manual Part #9 –See “Parts List” page on manual)
5
5
6
6
6
All manuals and user guides at all-guides.com

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 4 of 5
Version 20160725
Removing the Control Panel
Figure 1 Figure 2
Figure 3 Figure 4
Accessing the LED Light
For a more detailed guideline,
visit:
How to Replace LED Lights
3
2
2
2
2
All manuals and user guides at all-guides.com

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 5 of 5
Version 20160725
Removing the Blower System
Figure 1 Figure 2
Figure 3 Figure 4
1. Blower System (Manual Part #7 –See “Parts List” page on manual)
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. Place a support or hold the blower before removing it.
All manuals and user guides at all-guides.com