KOBE RA9430SQB-1 Use and care manual

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 5
Version 20160725
RA94 SQB-1 Parts Location and Replacement
This basic guide is to show the parts location of the RA94 SQB-1 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For 30” wall mount models: RA9430SQB-1, RA9430SQB-DC30-1, RA9430SQB-DC46-1
For 36” wall mount models: RA9436SQB-1, RA9436SQB-DC30-1, RA9436SQB-DC46-1
Overall Snapshot of RA94 SQB-1
1. Blower System (Manual Part #7 –See “Parts List” page on manual)
2. Control Panel (Manual Part #5 –See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #4 –See “Parts List” page on manual)
2
1
3
3

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 2 of 5
Version 20160725
Removing the Capacitor Support
Figure 1 Figure 2
Figure 3
4. Capacitor Support (Manual Part #8 –See “Parts List” page on manual)
4
4
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. When pulling the wires from the capacitor support, press the ‘push
release’ at the back of the cord.

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 3 of 5
Version 20160725
Accessing the Capacitor and Processor Board
5. Capacitor (Manual Part #10 –See “Parts List” page on manual)
6. Processor Board (Manual Part #9 –See “Parts List” page on manual)
5
5
6
6
6

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 4 of 5
Version 20160725
Removing the Control Panel
Figure 1 Figure 2
Figure 3 Figure 4
Accessing the LED Light
For a more detailed guideline,
visit:
How to Replace LED Lights
3
2
2
2
2

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 5 of 5
Version 20160725
Removing the Blower System
Figure 1 Figure 2
Figure 3 Figure 4
1. Blower System (Manual Part #7 –See “Parts List” page on manual)
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. Place a support or hold the blower before removing it.