KOBE CH00 SQB-1 User manual

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 5
Version 20160725
CH00 SQB-1 Parts Location and Replacement
This basic guide is to show the parts location of the CH00 SQB-1 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For under cabinet models: CH0030SQB-1, CH0036SQB-1, CH0042SQB-1, CH0048SQB-1
For wall mount models: CH0030SQB-WM-1, CH0036SQB-WM-1, CH0042SQB-WM-1, CH0048SQB-WM-1
Overall Snapshot of CH00 SQB-1
1. Blower System (Manual Part #4 –See “Parts List” page on manual)
2. Knobs (Manual Part #11 –See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #5 –See “Parts List” page on manual)
2
1
3
3

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 2 of 5
Version 20160725
Accessing the Capacitor and LED Driver
Warning: When pulling the wires from the capar support, press the ‘push release’ at the back of the c
Figure 1 Figure 2
Figure 3 Figure 4
4. Capacitor Panel (Manual Part #6 –See “Parts List” page on manual)
5. Capacitor (Manual Part #7 –See “Parts List” page on manual)
6. LED Driver (Manual Part #8 –See “Parts List” page on manual)
4
4
4
4
5
6
Warning: Loosen the screw first with a
hand tool screw driver.

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 3 of 5
Version 20160725
Removing the Control Knobs
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5 Figure 6
2
2
2
2
2
Warning: Loosen the screw first with a
hand tool screw driver.

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 4 of 5
Version 20160725
Figure 7 Figure 8
Figure 9 Figure 10
Accessing the LED Light
2

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 5 of 5
Version 20160725
Removing the Blower System
Figure 1 Figure 2
Figure 3 Figure 4
1. Blower System (Manual Part #4 –See “Parts List” page on manual)
1
1
1
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. Place a support or hold the blower before removing it.