KOCOM KIP-601PM Instruction Manual

Thank you very much
for purchasing KOCOM
Interphone.
please read this manual
thoroughly to ensure
correct usage,
before operating
DIRECT INTERPHONE
KIP-601PM / KIP-601PS
MA UAL FOR OPERATIO A D I STALLATIO

Perfect for private conversations

Delightful sound

Easy wiring with 2 lines of polarity

Power : D.C 6V (main only) 4 Piece of 1.5V
batteries (one side insert)

Range:  0.65mm wire, 300m line

Easily mounted on wall,desk
Features
KIP-601PM(MAI ) KIP-601PS(SUB)
09.04
This manual is based on the date as shown in the right and specifications
are subject to change without notice for quality improvement.
PRODUCT
MODEL
DATE PURCHASED
WARRA TY PERIOD
AGE CY
AGE CY ADDRESS
KOCOM Warranties the original purchaser of this product as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM
will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown caused by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
To receive after sales service, ave t e following ready w en
you contact our branc es
1. ame of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at which you can be
contacted.
Warranty
Warranty Card

Power Lamp
Call Button
Handset
A- Choose a place on the wall where you want to hang the Indoor station.
B- Fasten the wall hanger on the wall.
C- Indoor station can be hung on the wall hanger easily now.
Pick up the handset and communicate
with a visitor. After end of communication,
return the handset where it is locked
The sub station is
ringing.
B
E
N
Z
E
N
E
T
H
I
N
N
E
R
Keep away from humidifier and
stove. High temperature and
humidity can cause malfunction
When cleaning, never use wet
hands, volatile benzene or paint
thinner.
Maintain the product clear by
frequently cleaning with soft
cloths
As this device consists of precise electronic components, and high voltage is generated
internally, do not attempt to disassemble.
Do not drop lndoor station, and
avoid strong impact.
Precautions for Operation
Installation
Specifications
How to operate (Instruction for operating)
Name of Eac Part
When a visitor
pushes the main
station bell,
Wring Diagram
Description KIP-601PM KIP-601PS
Electric source DC 6V Power from Main (KIP-601PM)
Consumption Un Load: 0.2mW, In Load: 1W Un Load: 0.2mW, In Load: 1W
Signal Sound Electronic Chime Electronic Chime
Wiring 2Wired polarity 2Wired polarity
Range 300m(0.65mm) 300m( 0.65mm)
POLARITY
Volume
Switch
(KIP-601PM)