KOCOM KIP-612ML Instruction Manual

Thank you very much
for purchasing KOCOM
multiple interphone.
Please read this manual
thoroughly to ensure
correct usage, before
operating.
MULTIPLE INTERPHONE
KIP-612ML User’’ s Manual for Operation and Installation
■Dual Communication
■Power : DC 24V (Common)
■Distance of Communication : 300M,
In Use 0.
∅
-1Km
KIP-612ML IP-200PC
(SUB)
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS
◉KOCOM Warranties t e original purc aser of t is product as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect,
KOCOM will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
Warranty
Warranty Card
KIP-612ML 06. 12
To receive after-Sales service, ave t e following ready
w en you contact our branc es.
1. Name of the product.
2. Model number of the product.
3. The area of problem.
4. Phone number and address at which you can be contacted.
This manual is based on the date as shown in the right and specifications
are subject to change without notice for quality improvement.

Do not throw used-up battery into fire places, which may cause fire and explosion.
Cautions for installation
The relevant law obliges users to have a qualified electrician carry out wiring work for power supply. Work by disqualified
persons may cause fire and electric shock.
Wiring work for communication cables needs techniques and experiences. For this type of wiring work, please consult to your
local sales agent.
According to the standard for electric work and other relevant regulations, install communication cables at the place away
from power cables. The failure to install cables separately may cause fire, electric shock and communication troubles.
Do not install the product on rolling table or sloping place.
Dropping or falling may cause damage on your product.
In installation, avoid the place exposed to tremor or shocks, which may cause damages on your product.
Even if your product is waterproof, do not install it slanted place of water leakage, which may cause a short circuit.
For the product of wall-mounting type with fixing pegs, keep it safely.
Fixing pegs may cause injury of user.
Install the product of wall-mounting type carefully not to drop from the wall. Dropping due to earthquake or tremors may
cause injury of user.
When installing the product on the wall, consider the thickness and material of the wall.
Dropping in use may cause injury of user.
Cautions for Use
Do not put heavy thing on the product. Dropping or falling due to heavy things on it may cause injury of user.
Cautions for Repairs and Maintenance
Clean the dust inside the product regularly. Failure to clean the dust for long time may cause fire. For inspection and cleaning
of the inside of product, please contact your local sales agent.
When putting your hands into the inside of equipment, be sure that plug is already detached form an outlet or circuit-breaker is
turned off.
Be careful not to expose the product to benzene, thinner or hot water.
Do not expose detergent directly to the product in a way of spaying, etc.
Moving equipment, be sure that the plug is detached from an outlet.
For equipment whose cables are connected to terminals, please contact your local sales agent or qualified electrician.
When replacing old fuse with new one, do not directly touch it with bare hands.
Use insulated tools or contact A/S center.
Cautions
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Warnings for disposal
�Read this cautions carefully and keep it within easy reach of you.
�For right installation, read this cautions thoroughly. Please install the product according to its specifications.
�This Cautions for Safety may include items that are not contained in specifications of the product that consumer
purchases.
�Reading this cautions, use the product in a right manner. For further information, please contact our A/S center.
About Symbol
A variety of symbols are used in this Cautions for Safety and your products to guide you to use products in a right
and safe manner and to prevent possible risks for users and other persons and damages to their property. The meaning
of each symbol is as follows. After fully aware of meaning of each symbol, read the following cautions.
This symbol means that wrong handling or ignorance of matters that this symbol indicates
may cause serious injury or even death of user.
This symbol means that wrong handling or ignorance of matters that this symbol indicates
may cause serious injury or property damage of user.
This symbol means the matter that user should not do at nay event.
This symbol means that user should follow the instructions.
Symbols on Drawing
This symbol means that contents (high voltage, electric shock, warnings, etc.) to which user
should pay attention are included.
This symbols means that a certain action is not permitted. Specific points not permitted are
depicted around this symbol (for example, in the left drawing, disassembly is not permitted.).
This symbol means instructions or is used to force user to do a certain action. Specific
instructions are depicted on the drawing
(for example, the left drawing instructs user to detach power plug from an outlet).
Cautions for Safety
Warnings
Cautions
For safe use, please stick to the following cautions.
Warnings
- 1 - - 2 -

�This product is only for home. Do not the product for industrial or military use.
�Do not handle the equipment with wet hand, which may cause electric shock.
�Do not place wet or metallic materials on equipment. Water leakage or intrusion of metallic materials may cause fire and
electric shock.
�Do not block the ventilating opening of equipment or put alien substances into it, which may cause fire and electric shock.
�Do not use battery that is not designated or mix new battery with old ones. Insert batteries to fit their polarity. Explosion or
leakage of battery may cause fire and injury of user.
�When visitor's image or voice is not displayed on screen or not sounded from speaker, please check his/her identity before
opening the door and contact our A/S center.
�Do not use equipment when lighting is expected or strokes. It may cause fire and electric shock.
�Do not open rear cover, cabinet and cover of equipment. It may cause electric shock.
�Do not modify power cable or pull it with excessive strength, which may cause fire and electric shock.
�Do not modify equipment. It may cause fire and electric shock.
�Call signal may cause damage on user's hearing ability.
Cautions for Abnormality
�When power cable is broken (exposure of core or short-circuit), do not fail to replace broken cable with new one. Failure to
replace broken power cable may cause fire and electric shock.
�When detecting any abnormalities in equipment (communication is not available, images do not be displayed on screen, calling
is not available, or abnormal sound is heard), immediately detach plug from an outlet, or turn off circuit breaker or detach
batteries from equipment (in case that equipment has no plug) before requesting repairs to sales agent or A/S center. Keeping
connection to power supply may cause fire and electric shock.
�When alien substances go into equipment, immediately detach plug from an outlet, or turn off circuit breaker or detach batteries
from equipment (in case that equipment has no plug) before requesting repair to sales agent or A/S center.
�In the case of smoke or smell of unknown origin from equipment, keeping use it may cause fire and electric shock. Detach
plug from an outlet, or turn off circuit breaker or detach batteries from equipment (in case that equipment has no plug) and be
sure to check no more smoke or smell from equipment before requesting repair to sales agent or A/S center. Since personal
repairing work by user may serious accidents. In any case, do not repair equipment with your own hand.
�When dropping equipment or breaking its cabinet, detach plug from an outlet, or turn off circuit breaker or detach batteries
from equipment (in case that equipment has no plug) before requesting repair to sales agent or A/S center. Keeping use
equipment may cause fire and electric shock.
�Avoid direct exposure to sunlight and store equipment at the place free from dust and high temperature as you can. High
temperature of equipment may cause fire and electric shock.
Warnings Warnings
Cautions for Use
�Do not install the product at bathroom or at the place near a washing machine, or at other humid places. It may cause fire or
electric shock.
�Do not install the product at the place near a dresser, humidifier or heater. Also avoid the place exposed to spark, heat or
humidity. All of them may cause fire and electric shock.
�Do not install the product at the place exposed to dust, metals and harmful gas such as hydrogen sulfide gas, all of which
may cause fire and electric shock.
�Do not install the product at the place exposed to water and chemicals. This may cause fire and electric shock.
�Do not scratch, break or arbitrarily process power cable, which may cause fire and electric shock. Putting a heavy thing on a
cable, heating it or pulling it may cause impairment on it.
�Do not place power cable at the place near heating equipment. It may cause damage of cable's clothing material, which
result in fire ad electric shock. When detaching plug from an outlet, do not pull power cable.
�Damages on power cable may cause fire and electric shock. When detaching plug from an outlet, please hold the plug
tightly.
�Do not detach plug from an outlet with wet hand. I may cause electric shock.
�When using the existing wiring, be sure of the suitability of it to the product and install the product. Failure to this caution
may cause fire.
�When moving equipment, be sure that plug is detached from an outlet and communication cable is disconnected. Damage
on cables may cause fire.
�Voltage other than prescribed rated voltage is not permitted, which cause fire and electric shock.
�Do not use power terminal of product's main body in other equipment than prescribed ones. It may cause fire and short-
circuit.
�In wiring work, use the designated wiring materials.
Wiring work using other materials than designated ones may cause fire.
�The equipment without waterproof marking shall not be installed at the place water leaks. It may cause electric shock and
short circuit.
�When working, be sure that power is disconnected. Failure to disconnect power may cause electric shock.
�Be sure that the power cable is connected and earths according to designated method. Failure to connection and earth may
cause fire.
�Do not connect power to other terminals than designated ones.
�It may cause fire and electric shock.
�When building a system with the product, do not connect the product other equipment than designated one. It may cause
fire.
�When installing A/C switch, do work after removing the substance that may cause short circuit or electric shock.
�Before installing or providing A/S service, be sure that the power is disconnected.
Cautions for Use
- 3 - - 4 -

KIP-612ML IP-200PC
Product Specification
Wiring Diagram
How to Operate (Instruction for Operating)
Name of Eac Part
How to Installation
♪
♬
POWER : DC 24V(1.2A)
POWER CONSUMPTION : 0. 5W (UN LOAD)
1.7W (IN LOAD)
Wiring : 2 wires (Non polarity)
Max. communication distance : TIV 0. (2Km)
Gentle electronic sound
��COMPOSITION
- INTERPHONE MASTER (KIP-612ML)
- ADAPTOR (PS-M1 ※Option)
- INTERPHONE SUB (IP-200PC)
Precautions for Wiring
�As incorrect wiring may cause the device’s non-operation or poor communication quality,
please carefully conduct wiring work.
�When connecting a wiring chord to a terminal, loosen screw, insert the end of the chord into
the bottom part of screw, and tighten the screw.
�When fixing wiring chord, use stapler not to cause damage to the chord.
�When using existing wiring, please be cautious not to cause disconnection and short-circuit.
Handset
Call Button
Special function button
(Volume)
※Special function button : This button is volume button for adjust ring sound (UP/DOWN).
※Installation way of master & Sub are same.
�Place bracket on the wall and fix it with screws. After wiring, fit the rear side of main frame
to a groove in the bracket and pull the main frame down to fix.
�Avoid connection after wiring.
Making Call Call from Master
�Pick up handset of master
and push a button which
you want.
�Speaker outputs tone
sound “Ding-Dong”
�To communication, please picking up handset.
�Hang up handset, communication is ended.
- 5 - - 6 -