Kodak SCANZA User manual

KODAK SCANZA
DIGITAL FILM SCANNER
User Manual
4.7"W | 4.7"H | 5"D (120 x 120 x 127mm)
Please read all directions before using the product and retain this guide for reference.

2

3
INTRODUCTION
FEATURES
BOX CONTENTS
SAFETY PRECAUTIONS
TIPS
OPERATING INSTRUCTIONS
A. CONTROLS
B. PREPARING MEDIA TO SCAN
C. OPERATION
CAPTURE MODE
A. COLOR & BRIGHTNESS ADJUSTMENT
GALLERY MODE
A. ROTATE IMAGE
B. FLIP IMAGE
C. DELETE IMAGE
D. SLIDESHOW
SETTINGS
A. FILM TYPE
B. RESOLUTION
C. LCD BRIGHTNESS
D. USB UPLOAD
E. FILM TRAY
F. MEMORY
G. LANGUAGE
CONTENTS
1
2
3
4
5
6
7
8
9
5
5
6
6
7
812
8
911
12
1315
1415
15
16
16
17
17
1826
1820
2021
2122
2223
2324
2425
2526

4
SPECIFICATIONS
CUSTOMER SERVICE CONTACT INFORMATION
WARRANTY
10
11
12
26
27
2730

5
1. INTRODUCTION
Thank you for purchasing the KODAK SCANZA Digital Film Scanner. This User
Guide is intended to provide you with guidelines to ensure that operation of
this product is safe and does not pose risks to the user. Any use that does not
conform to the guidelines described in this User Guide may void the limited
warranty.
This product is intended for household use only.
This product is covered by a limited warranty and is subject to conditions
and exclusions.
Easily convert your slides, negatives, and even Super 8 frames to digital
images that you can store and preserve. Save your treasured memories on
an SD™ card (not included), or to your computer. You can also directly connect
to a TV or HDTV to view images.
• Converts 35mm, 126, 110 and Super 8 and 8mm ilm negatives and slides
to JPEGS in seconds
• 14/22 megapixel resolution
• No computer or software required
• Adjustable scanning resolution, brightness and coloration
• Tilt-up 3.5" color TFT color LCD screen
• Saves images to SD memory card (not included) or computer
• Video-out for TV connection (TV and HDMI cables included)
• Convenient, easy-loading ilm and negative adapters and inserts
• MAC and PC compatible
2. FEATURES

6
Digital ilm scanner Video cable AC adapter Warranty card
3 Adapter trays HDMI cable Cleaning brush
3 Inserts USB cable User guide
• Important: Do not expose this product to liquids or high humidity.
• Do not handle this product with wet hands. Risk of electric shock.
• Warning: Do not attempt to disassemble or alter this unit. This device
contains no user-serviceable parts.
• Do not block any ventilation openings.
• Do not operate this device near heat sources such as radiators or stoves.
• When connecting the KODAK SCANZA Scanner directly to your computer,
be careful to not over load the USB connections. If you have too many
devices connected to your computer, such as a wireless mouse, media
player, mobile phone or other USB powered devices, there may not be
enough power for the product to function properly.
• Do not move or disconnect the device from the computer while the device is
reading/writing data. This may cause damage to the data and/or the device.
• Slides and negatives MUST be placed in the proper adapter tray and insert
before inserting them into the product. Failure to do so may result in losing
media inside the unit and will void the warranty. Resultant media loss is NOT
covered under warranty.
• Always turn o and unplug the device when it is not in use. Unplug the USB
cable from your computer and unplug the AC adapter from the socket.
With the exception of Slideshow in Playback or ile transfer in USB mode, this
unit will automatically power o after 10 minutes of inactivity.
3. BOX CONTENTS
4. SAFETY PRECAUTIONS

7
• Place the scanner on a lat, stable surface with the LCD display facing you.
• Use the included cleaning brush to clean the backlight, adapter, or insert.
Insert the brush — CLEANING PAD SIDE DOWN — into the adapter opening
on the bottom of the unit. Gently wipe the inside bottom of the unit. Never
use alcohol, detergents, or abrasive cleaning agents to clean this device.
• Always remember to save your scanned image before inserting another slide
or negative into the scanner.
• For clear images, clean your ilm with a soft cloth or compressed air prior to
inserting it into the scanner.
• Negatives and slides should be inserted with the shiny side up. Super 8 ilm
should be inserted with the perforated holes facing up.
• Always handle ilms with care to avoid scratches or ingerprints.
• View your images on your TV. Simply connect the included video or HDMI
cable to the scanner and your TV. Note that when using this mode, the
screen on the ilm scanner will turn black. To reactivate the screen, the
HDMI cable will need to be unplugged.
5. TIPS

8
6. OPERATING INSTRUCTIONS
4
1
23
5
1. Function keys (soft keys): The function is indicated by the text that will
appear on the screen above the corresponding key.
2. Power button: Press and hold to turn the device on and o.
3. Capture button: Captures the image or brings up the capture view screen.
4. Tilt-up LCD screen: Displays the image to be captured and scanned as well
as functions and menus.
5. Home button: Takes you to the Home screen.
6A. CONTROLS
NOTE: Illustrations are for instructional
purposes only, and may be dierent
from the actual product.
1. Function Keys
2. Power On/O Button
3. Capture Button
4. Tilt-up LCD Screen
5. Home Button

9
Before using your ilm scanner, you must insert an SDTM card (not included) or
the unit will not operate. There is no built-in memory.
Load your ilm/slide into the appropriate adapter and insert according
to the Tray Directory below. (Table can be found onscreen at
Home>Settings>Film Tray).
Each adapter tray and insert is clearly marked and numbered.
6B. PREPARING MEDIA TO SCAN

10
TRAY DIRECTORY
FILM
TYPE
FILM TYPE ADAPTER
NEEDED
INSERT
NEEDED
Negative Color Negative 135 No. 2 None
Color Negative 126 No. 1 None
Color Negative 110 No. 2 No. 5
Slide Slide Positive 135 No. 1* None
Slide Positive 126KPK No. 1* None
Slide Positive 110 No. 1* No. 6
Slide Positive Super 8 None No. 4
Slide Positive 8MM None No. 4
Black &
White
Black & White 135 No. 2 None
Black & White 126KPK No. 1 None
Black & White 110 No. 2 No. 5
*Note: Use adapter # 3 for slides with a thicker casing (plastic).
Use adapter # 1 for slides with a thin cardboard casing.
Slides 35mm 110 110 126 127
Mount 2"x2" 2"x2" 1"x1" 2"x2" 2"x2"
Film Size 24x36mm 13x17mm 13x17mm 28x28mm 40x40mm

11
Flip up the top cover of the adapter. Place
insert with your slide or ilm into adapter.
This ilm scanner features speed-load
adapters to make scanning easy and
straightforward. Simply push them into
the device until you hear a click, and
you can feed in slides or negatives one
after the other without needing to
remove and reload the adapters.
Note: When loading 8mm
ilm, always ensure that the
side ridges are facing to the
right side of the adapter,
towards where the
number is written.

12
Upon powering on, and before
displaying the HOME screen,
the screen displays the currently
selected ilm type, adapter, and
insert information for 5 seconds
and then brings up the capture
mode screen.
HOME SCREEN
The Home screen will appear when the unit is powered on, whenever
the Home button is pushed, and any time SAVE/EXIT is selected.
Note: There is a dierence
between SAVE/EXIT and
SAVE/BACK. SAVE/EXIT takes
you back to the Home screen.
SAVE/BACK takes you back to
the submenu you are using.
The Home screen features 3
submenus: Gallery, Capture,
and Settings.
Note: Anytime the capture button is pressed, the ilm scanner will automatically
enter Capture mode.
6C. OPERATION

13
1. Press the soft function key under
the Capture icon on the screen
to go to the capture mode. Your
loaded image will appear on the
LCD screen. The status bar on
the top, indicating the active
mode and settings, will disappear
after 15 seconds. Press any of the
function keys to bring back the
status bar.
• The underlined text indicates the highlighted setting. The highlighted
setting can be accessed by pressing the Select button.
• By selecting color adjustment, you will be taken to the settings menu to
adjust the color of the photo.
• By selecting Info, you will be taken to a screen that tells you which adapters
are needed for the current mode. If you wish to change the ilm type, you
will need to do so manually in the Film Type settings.
2. Press the hard Capture button (camera icon) to capture and save an image.
The screen will display “Saving.”
Note: An ERROR message will
appear if the SD™ card (not
included)
is full or if no memory card is
inserted into the unit.
Note: Pressing the soft keys will
activate the status bar, where you
can select color adjustment or
info. To return to capture mode,
select the camera icon on the status bar.
3. Press any function button to bring up the status bar at the top of the screen.
7. CAPTURE MODE

14
Home
To adjust brightness and color, press
the center soft function key (“Select”).
“Brightness” will be highlighted in
the status bar. Press the center key
(“Adjust”) to bring up the brightness
scale. Use the keys under the left <
and right > arrows to increase (>) or
decrease (<) the brightness.
Press the center key (“Save/Back”).
Choose the right function key
(down arrow) to scroll through
brightness and color settings.
There are 4 color adjustment settings:
R = Red G = Green B = Blue RESET = Default color and brightness setting
7A. COLOR AND BRIGHTNESS ADJUSTMENT
Home
4. The Color Adjustment screen
will appear.
• Press the right function key
(“Info”) to review your ilm type,
adapter and insert.
• Press the center function key
(“Select”) to adjust color
and brightness.
• Press the left function key to
return to the image and then
press “Select” to go back to
the capture mode.

15
Home Home Home
For each setting (R, G, B) a scale will appear at the bottom of the screen. Press
the center function key (“Adjust”) to adjust each color, then press the function
keys under the decrease (–) and increase (+) symbols. Press the center key again
(“Save/Back”) to save your selection. Use the right key (down arrow) to navigate
each color setting.
Press the Home button and then select the function key under “Gallery” to view
and edit your images.
Use the left < and right > function
keys to scroll through images.
To edit or delete an image, choose
the center function key (“Select”)
when that image appears on
the screen.
Press the function keys under
the right > symbol to navigate
the choices in the top status bar:
Rotate, Flip (>|<), Delete, and Slideshow.
Press the function key under “Select”
when you’ve made your choice.
8. GALLERY MODE
Home
Note: The color adjustment resets to the default setting “0” after the ilm
scanner has been restarted.

16
You can rotate the image left
or right.
To select an image to rotate:
1. Enter gallery mode as
described above.
2. Use the left < and right > function
keys to scroll through images.
3. To rotate the image, press the
center soft key (select). Then
press the right soft key to cycle
through the editing options listed
at the top of the screen (Rotate,
Flip (>|<), Delete, and Slideshow).
8A. ROTATE
Home
8B. FLIP IMAGE
Before
After
You can lip the image vertically
or horizontally.
Home

17
To delete an image, navigate the
top status bar to display the trash
can icon. Press the center function
key to “Select.” You will be asked
to conirm if you want to delete
that image.
8C. DELETE
Home
View stored images in succession.
In the slideshow mode you can
pause (||) or play (>) by pressing
the center function key.
8D. SLIDESHOW
Home

18
From the Home screen, select
Settings by pressing the soft
function key under the
Settings icon.
Press the corresponding soft
function key under the left < and
right > arrow symbols to scroll
through the settings:
• Film Type
• Resolution
• LCD Brightness
• USB Upload
• Film Tray
• Memory
• Language
Press the soft function key under any of the icons that appear on the screen
to enter that function’s submenu.
Home
9. SETTINGS MODE
Negative: 135, 110, 126
Slides: 135, 110, 126, SUPER8, 8MM
B&W: 135, 110, 126
9A. FILM TYPE

19
1. Choose one of the 3 ilm types by pressing the center function key (“Select”).
Choose Back to return to the Settings menu.
Home Home
2. For each ilm type, select the ilm size.
Home Home

20
3. Once the ilm type and size are
selected, a conirmation screen
will appear with directions. Press
Save/Exit to save and return to
the Home screen.
4. Repeat the process to change
ilm types or sizes.
From the Settings menu, continue
to select additional settings from
the submenus. Press the function
key under “Save/Exit” after
each selection.
Note: Selecting “Save/Exit” will redirect
you back to the Home screen.
Home
1. Select Resolution from the
settings menu.
2. You can choose between the
standard 14-megapixel scan,
or enable the built-in software
interpolation, which, through a
specialized algorithm, enhances
the image quality to 22
megapixels.
Cycle between these 2 options
using the arrow keys.
9B. RESOLUTION
Home