Koden MDC-2900 User manual

Declaration of Conformity
(As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive)
Declares under his sole responsibility that the produced Marine Radar System manufactured
by
Koden Electronics Co., Ltd.
5278 Uenohara
Uenohara-Shi,
Yamanashi-Ken
409-0112
Japan
Telephone [phone] Telefax [phone]
Intended for Worldwide use as a Marine Radar for use aboard non-SOLAS vessels and
identified by the type number MDC-2960 / MDC-2910 / MDC-2920 to which this
declaration refers has been tested to the essential radio test suites required by the notified
body and is in conformity with the standards
EN 60945 : 2002 ( Clauses 9,10 & 12 )
EN 62252 : 2004 ( Clauses 4.8, 4.33, 5.8, 5.33 and Annex D )
ITU-R Recommendation RM.1177
and complies with the essential requirements of Directive 1999/5/EC
Conformity procedure under Annex IV of 1999/5/EC (Technical Construction file) has been
undertaken by
QinetiQ Ltd. Cody Technology Park Ively Road, Farnborough GU14 0LX. United Kingdom
The Technical Construction File is held by Mr Heinz Hoghoff at
Koden Elektronik GmbH,
Am Gewerbepark 15,
D-64823 Gross-Umstadt / Hessen
Germany
Telephone [phone] Telefax [phone]
Kenichi Chiwaki, QA Manager.
Koden Electronics Co., Ltd.
02 Feb. 2009

Declaration of Conformity
(As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive)
Declares under his sole responsibility that the produced Marine Radar System manufactured
by
Koden Electronics Co., Ltd.
5278 Uenohara
Uenohara-Shi,
Yamanashi-Ken
409-0112
Japan
Telephone [phone] Telefax [phone]
Intended for Worldwide use as a Marine Radar for use aboard non-SOLAS vessels and
identified by the type number MDC-2960BB / MDC-2910BB / MDC-2920BB to which
this declaration refers has been tested to the essential radio test suites required by the notified
body and is in conformity with the standards
EN 60945 : 2002 ( Clauses 9,10 & 12 )
EN 62252 : 2004 ( Clauses 4.8, 4.33, 5.8, 5.33 and Annex D )
ITU-R Recommendation RM.1177
and complies with the essential requirements of Directive 1999/5/EC
Conformity procedure under Annex IV of 1999/5/EC (Technical Construction file) has been
undertaken by
QinetiQ Ltd. Cody Technology Park Ively Road, Farnborough GU14 0LX. United Kingdom
The Technical Construction File is held by Mr Heinz Hoghoff at
Koden Elektronik GmbH,
Am Gewerbepark 15,
D-64823 Gross-Umstadt / Hessen
Germany
Telephone [phone] Telefax [phone]
Kenichi Chiwaki, QA Manager.
Koden Electronics Co., Ltd.
02 Feb. 2009

MDC-2900 Series Revision History
0093129012-06 i
MDC-2900 Series Operation Manual
Doc No: 0093129012
Document Revision History
No. Doc. No.- Rev. No. Revised Date
(Y/M/D)
Revised Content
0 0093129012-00 2009/04/28 First edition
1 0093129012-01 2009/06/05 Full revision
2 0093129012-02 2009/07/24 Full revision
3 0093129012-03 2009/09/25 Chapter 7
4 0093129012-04 2010/01/26 Contents, Chapter 1, Chapter 2, Chapter 4, Chapter 8
5 0093129012-05 2010/04/15 Chapter 1, Chapter 4
6 0093129012-06 2011/11/15 Important Notice, Chapter 2, Chapter 3, Chapter4
TT(ATA)→TT(ARPA)
7
8
9
10
Document No. Revised Version Norm
When part of the document needs to be revised, the document has advanced revision number.
The document No. is indicated at the lower right side on the cover and at the left or right side of the
footer region of each page.
© 2009-2011 Koden Electronics Co., Ltd. All rights reserved.
No part of this publication may be reproduced, transmitted, translated in any from by any means without
the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this
publication are subject to change without notice. Koden assumes no responsibility for any errors,
incidentals or consequential damages caused by misinterpretation of the descriptions contained in this
publication.

Important Notice MDC-2900 Series
ii 0093129012-06
Important Notice
For copy and transcription of this Operation Manual (hereinafter referred to as this manual),
permission from Koden is needed. Koden prohibits the un-authorized copy and transcription of this
manual.
If this manual is lost or damaged, consult a dealer of Koden or Koden.
The specification of the products and the contents in this manual are subject to change without
notice.
The contents displayed on the menu of product may be different from the expression of this
manual. The fonts and shapes of the keys and menus in the illustration may differ from the actual
ones, and some parts may be omitted.
Koden is not liable for damages and troubles arisen from misunderstanding of the contents in this
manual.
Koden is not liable for any damages caused by earthquake, lightning, wind and flood damage and
fire for which Koden is not responsible, and actions by third parties, other accidents, customer’s
unintended error/abuse and the use under other abnormal conditions.
Koden is not liable for damages of accompaniment (change/loss of memorized content, loss of
business profit, stop of business) arisen from use or failure of our products.
If the stored data are changed or lost, irrespective of causes of troubles and damages, Koden is
not liable for them.
Koden is not liable for any damages arisen from malfunction caused by combination of software
and connected equipment in which Koden is not engaged.