Kogan KAMFRWARBKA User manual

MILK FROTHER
AND WARMER
KAMFRWARBKA, KAMFRWARSSA

Ensure to read all instructions in this user guide prior to first use. Retain this user guide for
future reference.
•Discard all packaging when removing the frother out of the box as the packaging
may cause a hazard to children.
•Discard the protective cover on the power plug as this may cause a choking hazard
to children.
•This frother cannot be used by persons (including children) with reduced physical,
sensory, or mental capabilities or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the frother, by a person
responsible for their safety.
•The magnetic frothing disc and magnetic mixing disc can be choking hazards. Adult
supervision is required at all times when children are around the appliance.
•Do not allow children to play with the appliance.
•The appliance is intended for households and for similar uses such as:
oStaff kitchen areas in shops, offices, and other working environments.
oFarmhouses
oBy clients in hotels, motels, bed and breakfasts, and other residential type
environments.
•Do not use the frother outdoors. Using the frother in environments other than those
stated in this user guide may lead to misuse and injuries.
•The milk frother is intended for the purpose of foaming milk and other dairy milk
alternatives. It is not intended to thicken or heat other foods (for example, cream,
custards, soups, gravies).
•If the frother is damaged, stop use immediately and contact help.Kogan.com for
assistance. Using a damaged frother can lead to electric shocks, burns, and fires.
•If the power cord is damaged, stop use immediately and contact help.Kogan.com for
assistance.
•Do not modify or attempt to repair the frother yourself.
•Do not immerse the power base into water or any other liquids.
•Do not pour water or any other liquid into the power base as this may lead to electric
shock.
•Do not place the frother on or near hot surfaces (for example, gas burners, hot
plates).
•The heat plate is subject to residual heat after use. Do not touch the heat plate as
this may cause injuries.
SAFETY & WARNINGS

•The power base can only be used with the jug of this frother. Do not use other jugs
with this power base.
•Do not place metal or any other hard objects into the jug as this may cause damage
and affect the operation of this frother.
•This jug becomes hot during use and touching it may cause injuries. Instead, use the
handle to hold the jug.
•Do not operate the milk frother if there is no milk or water in the jug.
•Ensure the bottom and exterior of the jug is dry before placing it onto the power base.
•When pouring, do not exceed the MAX line marked on the inside of the jug.
•When in use, do not place the hot jug near or on the power cord.

1 Lid with silicon seal 6Storage compartment
2 Jug 7Handle
3 Magnetic frothing disc 8Heat plate
4 Magnetic mixing disc 9Power base
5 Function indicator lights 10 Function button
COMPONENTS
1
2
3
4
5
6
7
8
9
10

1. Place the milk frother on a dry and stable surface. Insert the power plug into a socket
and switch the socket on. The frother will then enter standby.
2.Depending on the desired drink, insert the magnetic frothing or mixing disc onto the
shaft inside the jug.
3.Pour the required amount of milk into the jug, then place the lid on top of the jug,
ensuring it is securely sealed.
OPERATION
Notes:
•When pouring milk, do not exceed the MAX line indicated on the jug.
Exceeding this line may cause milk to overflow when the frother is operating.
•
For the optimal froth, use fresh cold milk (2–8°C).

4.Place the jug onto the power base. Press the function button repeatedly to cycle
through the desired function (Cold, Latte, Capp, Hot Choc).
The respective function indicator light will illuminate with the chosen function. The
function indicator light will then flash for 2 seconds before the frother starts
operating.
5.Once complete, the milk frother will stop automatically and beep three times.
6.Using the handle, carefully remove the jug off the power base and place onto a
stable surface. Take off the lid and pour out the contents.
Note:
If milk is spilled, remove the jug immediately and unplug the power cord.

Functions
The table below shows each function’s estimated operating temperature range, running
time, and disc required depending on the amount of milk placed into the jug.
Function Milk (ml) Temp (°C)
Time
(mins)
Disc required Perfect for
Capp
100 (min)
60–70
3–4
Frothing disc
Cappuccino
250 (max)
60–65
4–6
Latte
100 (min)
60–70
3–4
Latte
250 (max)
60–65
4–6
Cold
100 (min)
N/A
2
Iced coffee or
flavoured milk
250 (max)
N/A
2
Hot Choc
100 (min)
60–70
3-4
Hot chocolate
250 (max)
60–65
4–6
Hot Choc
100 (min)
60–70
3–4
Mixing disc Hot milk
250
60–65
4–5
350 (max)
60–65
5–6
Notes:
•Temperatures and times may vary depending on the initial
temperature/type/amount of milk used.
•If making hot chocolate, it is recommended to combine milk with either cocoa
powder, or a chocolate block cut into small pieces to allow for easy melting.

Cleaning
The jug, discs, and lid with silicon seal should be cleaned after each use to prevent build-up
of milk residue. The jug may be used in a dishwasher or be hand washed. The remaining
components must be hand washed.
Hand wash the components with detergent then rinse with warm/hot water.
Wipe the exterior of the power base with a dry cloth.
Insert the magnetic mixing disc onto the shaft inside the jug then place the lid on.
Turn the power base over and secure the magnetic frothing disc inside the storage
compartment.
Storage
Store the frother in a cool dry place, out of reach from children.
CLEANING & CARE
WARNING: The jug should not be washed at more than 70°C in the
dishwasher.
Notes:
•Do not use harsh or abrasive materials when cleaning the components as this
may lead to damage.
•Do not immerse the power base into water or any other liquids.

Problem Solution
The frother does not heat
up when operating.
•Ensure the frother is plugged in and power is switched
on at the socket.
•Ensure the jug is properly secured onto the power base.
When operating, the
function indicator lights
illuminate but the
magnetic frothing/mixing
disc is not working.
•Ensure the frothing/mixing disc is securely mounted
onto the shaft inside the jug.
•Ensure the frothing/mixing disc is not damaged. If
damaged, stop use immediately and contact
help.Kogan.com for assistance.
There is too little/too much
milk foam.
•For the optimal level of foam, ensure the milk is fresh
and cold (2–8°C).
•Ensure the milk has not spoiled.
•Ensure the magnetic frothing disc is being used with
when frothing milk.
The frother is making
strange noises when
operating.
Ensure the jug is properly secured onto the power base.
Power input 220–240V, 50–60Hz
Rated power 585–685W
Dimensions 170 x 135 x 200mm
TROUBLESHOOTING
SPECIFICATIONS

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com