Kogan KAMN30FXULA User manual

30" CURVED ULTRAWIDE
GAMING MONITOR
(2560 x 1080, 1500r, 200Hz, 21:9)
KAMN30FXULA

Safety & Warnings
3
Components
4
Overview
5
Assembly
6
VESA Mount
7
Connectivity
8
Operation
10
ECO Modes & Gameplus
14
Specifications
15

• Read all instructions before using the appliance and retain this user guide for future
reference.
• Unplug the monitor before cleaning it.
• Use a clean, slightly-dampened cloth to wipe the main monitor body.
• To c l e a n t h e s c r e e n : t u r n i t o f f , u n p l u g i t a n d w a i t f o r i t t o c o o l c o m p l e t e l y, t h e n w i p e i t
with a dry microfibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover or
block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as
well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged
and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even
when not plugged in.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
SAFETY & WARNINGS

Monitor
Stand Stem
Stand Base
VESA Connectors
DP cable
Power Cable
Power Adapter
User Guide
COMPONENTS

Controls
1. Power button
2. RGB Range/Exit
3. LED light effect/Down
4. Menu/Enter
5. GamePlus Mode/Up
Ports
6. Power Input
7. HDMI Input
8. DisplayPort Input
9. Audio Output
OVERVIEW

Before disposing of any packaging, place all items on a soft, clean and flat surface to
ensure all components are accounted for.
Installing the Stand Base
1. Lay the monitor screen facing down on a table with the monitor still resting on the
packing foam. Attach the display base and attach it to the display neck. While the
neck is attached to the base, insert, and tighten the base screws to the underside
of the base.
2. Open the packing foam with the monitor resting facing downwards. Take the
assembled stand piece and insert it headfirst into the circular opening on the back
of the monitor. Once it is inserted press downwards on the neck until you hear a
‘click’ sound.
ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam
underneath the monitor screen while assembling the stand.

Follow the steps below to install onto a monitor arm or wall mount (not included)
1. Lay the monitor screen facing down on a table with the monitor still resting on the
packing foam.
2. With the circular indentation now open to you, remove the four screws installed on
the back of the monitor.
3. Install the provided VESA connectors to the back of the monitor.
4. With the VESA connectors installed, the monitor is ready to be wall mounted. The
mounting pattern is 75mm x 75mm.
VESA MOUNT

Power
1. Connect the included power cable to the monitor power port.
2. Connect the power cable to the power adapter.
3. Connect the power adapter to the power outlet.
Audio
Plug in your earphones to receive audio signals from your monitor. If your earphones are
connected to the monitor and audio devices are connected to your computer at the same
time, the audio devices will not produce sound. Earphones and other audio devices not
included.
CONNECTIVITY

HDMI
In order for the monitor to receive HDMI signals from the computer, use a HDMI cable to
connect the monitor to the computer.
DisplayPort
In order for the monitor to receive DisplayPort signals from the computer, use the
DisplayPort cable to connect the monitor to the computer.

1. Connect the monitor to the input device via HDMI or DisplayPort.
2. Connect the power cable to the monitor, then connect the other end directly to a
power socket.
3. Use the power button to turn the monitor on.
Indicator Light
Solid Blue light: Power is on and the monitor is operating normally.
Flashing Blue light: No video source. No horizontal or vertical signal detected. Please
ensure your computer is on and all video cables are fully inserted and/or connected.
The On-Screen Display (OSD)
The OSD menu may be used to adjust your monitor’s settings and
appears on screen after turning on the monitor and pressing the
Right button.
When using the monitor for the first time, settings will
automatically adjust to optimal parameters according to your
computer’s configuration and parts etc.
1. The monitor includes one touch options to access common settings.
2. Press
Right
to enter the OSD menu.
3. Press
Up
or
Down
to browse functions. Highlight the desired function, then press
Right
to enter the sub-menu. Press
Up
or
Down
to browse sub-menus, then press
Right
to highlight the desired function. Press
Up
or
Down
to highlight an option,
then press
Right
to confirm the settings and exit the current screen.
4. Press
Left
to exit the current screen.
OPERATION