Kogan KAMN27FG6TA User manual

27” FULL HD 165Hz FREESYNC
GAMING MONITOR
(1920 x 1080)
KAMN27FG6TA

• Read all instructions before using the monitor and retain for future reference.
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the main monitor body.
• To c l e a n t h e s c r e e n , t u r n i t o f f u n p l u g i t a n d w a i t f o r i t to c o o l c o m p l e t e l y, t h e n w i p e
it with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not
cover or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat.
• Place monitor in well ventilation room.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current
even when not plugged in.
• Before disposing of any packaging, place all items on a soft, clean and flat surface
to ensure all components are accounted for.
The terms HDMI and HDMI High-Definition Multimedia
Interface and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
SAFETY & WARNINGS

Monitor
Stand bracket
Stand base
M4x20mm Screw (x2)
M4x12mm Screw
Power adapter
HDMI cable
User guide
OVERVIEW

1
LED indicator
7
Power input
2
Power button
8
HDMI
3
Exit button
9
HDMI
4
Down button
10
DisplayPort
5
Up button
11
Audio out (3.5mm jack)
6
Menu button
OVERVIEW
1
2
3
4
5
6
7
8
9
10
11

Before disposing of any packaging, place all items on a soft, clean and flat surface to
ensure all components are accounted for.
Monitor stand
1. Lay the monitor on a cloth with the LCD panel facing down to prevent it from being
damaged. Attach the stand bracket to monitor using the x2 M4x20 screws.
2. Attach the stand base to the stand bracket and secure it in place using the M4x12
screw.
ASSEMBLY

Monitor adjustment
The angle of the stand can be adjusted forward 5° and backwards 15° to achieve a
comfortable viewing experience.
Note: Take care not to touch the screen area when adjusting the angle of the monitor.

Before installing the VESA mount onto this monitor, ensure to the stand has been removed.
To ensure sufficient ventilation, Install the monitor at least 10 cm away from the wall and
leave approximately 10 cm of space at either side of the monitor.
1. Place a clean, dry and lint-free cloth on a flat, stable surface.
2. Gently lay the monitor on the cloth with the LCD screen facing down.
3. Identify the 4 mounting holes on the back of the monitor (Figure 1).
4. Assemble the VESA mount as per the instructions provided.
5. Ensure that all screws (not supplied) are tightened and secured properly.
VESA MOUNT
VESA mounting pattern 100 x 100mm, screw size M4.
Note: VESA mount or mounting accessories are NOT included.
Figure 1

Power
1. Turn the PC and the monitor off before connecting them.
2. Connect the included power adapter to the monitor’s power input.
3. Connect the power adapter to the power outlet.
HDMI
Use the included HDMI cable to connect the monitor to your computer.
CONNECTIVITY
Power adapter
HDMI cable (included)

DisplayPort
Use a DisplayPort cable to connect the monitor to your computer.
Audio
1. Connect a 3.5mm audio cable to the audio out on the monitor.
2. Connect the audio cable to the 3.5mm port on your headphones or speakers.
Note: The monitor may need to be set as the PC’s default sound output device.
DP cable (not included)
Audio cable & headphones
(not included)