Kogan KAMN34RQUCJA User manual

34" CURVED ULTRAWIDE FREESYNC
USB-C GAMING MONITOR
(3440 X 1440, WQHD 165HZ)
KAMN34RQUCJA

2
Safety & Warnings
3
Components
4
Overview
5
Assembly
7
Connectivity
10
Operation
13
Specifications
21
Notes
22

3
• Read all instructions before using this monitor and retain this user guide for future
reference.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as
well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged
and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor as it contains a high-voltage current even
when not plugged in.
• There is a polariser layer (not a protective film) on the surface of the screen. Do not peel
it off or the monitor may be damaged.
The terms HDMI and HDMI High-Definition Multimedia
Interface and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
SAFETY & WARNINGS

4
Monitor
Stand Arm
Stand Base
M5x10 Screw
Power Adapter
HDMI Cable
User Guide
COMPONENTS

5
1
HDMI port
2
DisplayPort
3
USB-C port
4
USB-B port
5
USB-A port (x2)
6
3.5mm audio out
7
Power input
• When connecting devices to the monitor, it is recommended to connect the USB-B
first. Then, the USB-A ports can be used.
• USB-B is commonly used for printers, monitors and other devices.
• USB-A is commonly used for mice, keyboards, flash drives and other devices.
OVERVIEW
1
2
3
4
5
6
7

6
Controls
Turn the monitor On/Off
EXIT
Exit from the main menu or return to the previous menu
Navigate left/adjust or reduce
Navigate right/adjust or increase
MENU
Selects menu item
Menu
Left
Right
Exit
Power

7
1. Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD
panel from being damaged.
2. Attach the stand arm to the rear of the monitor.
3. Attach the stand arm to the base using the supplied M5x10 screw.
4. Attach the cover plate to the rear of the monitor.
5. Stand the monitor up on the installed stand base.
ASSEMBLY
Cover plate

8
Adjust the Angle
The angle of the screen can be adjusted forward 5°or backward 15° to create the ideal
viewing experience
Wall Mounting
• To ensure sufficient ventilation, install the monitor at least 10cm away from the wall
and leave about 10cm of space on each side of the monitor.
• If you are not confident in wall mounting this product, consult a licensed trade
professional.
Forward Angle
Backward Angle
WARNING: Before installing the monitor on the wall, detach the
stand from the monitor.
Notes:
• Do not touch or press the screen when adjusting the angle of the monitor.
• The images below are for illustrative purposed only. Actual monitor may differ
slightly.
•

9
1. Place a clean, dry and lint-free cloth on a flat, stable surface.
2. Gently lay the monitor on the cloth with the screen facing down.
3. Identify the four wall mounting screw holes on the back of the monitor.
4. Install the wall mounting bracket (not provided) on the back of the monitor and
attach the monitor to the wall according to the mounting bracket's instructions.
5. Ensure that all screws (not provided) are tightened and secured.
Wall mount: (A x B) 100x100mm
Recommended screw size:
• M4 x 16 mm (A)
• M4 x 6 mm (C)
The drawing is for illustrative
purpose only.
10 cm
10 cm
10 cm
10 cm
Notes:
• Use a wall mounting bracket and screws that conform to VESA standards.
Ensure that the box fits appropriately.
• For more information, please refer to the user manual for the wall mounting
bracket.
• This monitor model does support wall mounting, however, due to its size, it is
recommended to use a stand.

10
Before connecting the monitor to your PC, shut off the power to both the PC
and the monitor.
HDMI
Connect the provided HDMI cable from the computer’s HDMI port to the monitor’s HDMI
port.
DP
Connect a DisplayPort cable (not provided) from the computer’s DisplayPort to the
monitor’s DisplayPort.
CONNECTIVITY
HDMI Cable (Included)
HDMI OUTPUT
PC
Laptop
PC