Kogan KAPR6FHDWAA User manual

600 ANSI FULL HD WI-FI
PROJECTOR (W6)
KAPR6FHDWAA

2
Safety & Warnings
3
Components
4
Overview
5
Operation
8
Troubleshooting
19
Specifications
20
Notes
21

3
• Read this user guide fully and carefully before using the product.
• To avoid eyes injury, do not look directly into the light from the projector.
• A direct burst of intense light can harm your eyes and cause severe damage to the eyes
of infants.
• Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, cease use immediately and contact
help.Kogan.com for support.
• Ensure the projector is a safe distance from any heat-emitting devices or the service life
of the projector may be shortened.
• To ensure a stable power supply, ensure the electrical outlet used has the appropriate
protection measures, such as grounding.
• Do not use any power cord other than the one supplied with this product.
• This product does not contain any user serviceable parts. Do not disassemble or modify
this product in any way.
• Do not place this product on any items that may block the ventilation openings (cloth,
blankets, etc.).
• This product is not waterproof, to prevent electric shock, do not expose the device to
rain or water.
• Do not place any items containing liquids near the device.
• Do not use or operate this product in a damp, humid environment.
• If this product will not be used for an extended period, disconnect the power cord.
• To avoid damage, when transporting this product, place it back in its original
packaging.
SAFETY & WARNINGS

4
Projector
Remote
AV Cable
HDMI Cable
Power Cable
User Guide
COMPONENTS

5
OVERVIEW
1
2
3
4
5
6
7
8
9

6
1
Focus lens
9
Removable dust cover release
2
Adjusting knob
10
USB port
3
IR receiver
11
HDMI 1 port
4
3.5mm port for audio output
12
HDMI 2 port
5
AV port
13
Power switch
6
Speaker
14
Focussing ring
7
IR receiver
15
Removable dust cover
8
Removable dust cover
10
11
12
13
14

7
Adjusting knob (lifting nut)
Remote Control
Power Switch
Direction Button
Confirm Button
Menu Button
Volume +
Volume -
Signal Source
Home Button
Back Button
Pause/Play Button
Fast forward
Previous
Mute

8
Placement and Mounting
Before using the projector, select an appropriate
area that has reduced brightness to allow for the
best viewing results.
If the projector will be mounted to the ceiling, this
projector supports most universal mounts (sold
separately).
1. Front projection ceiling mount
2. Front projection table mount
3. Rear projection ceiling mount
4. Rear projection table mount
Notes:
• During the installation, do not connect the power supply, to avoid electric shock
hazards and projector circuit failure.
• Keep a gap of at least 30 cm from the wall. Do not cover or block the projector's vents
with any objects. Make sure that the projector has enough ventilation to ensure the
projectors. performance and reliability.
• If you have a projector screen and need to be mounted on a ceiling, the projector
cannot be higher than the upper edge of the screen, otherwise it will affect the image
effect.
OPERATION

9
Ceiling Mounting
1. Purchase a universal projector ceiling mount.
2. Remove the four rubber pads on the underside of the projector, you will see the screw
holes.
3. Use the M4x10mm screws to install the ceiling mount.
4. Following the instructions included with your mounting kit to mount the projector.
Projection Size and Distance
Follow the data in chart below, to adjust the image size and the distance. Distance
provided is measured from lens to projected surface.
The recommended projection screen is around 80 inches with a projection distance of
approximately 2.5m. Ambient darkness will improve the clarity of the projected images.
Ceiling mounting
Rubber pads
50”
80”
100”
120”
150”
1.56m
2.5m
3.13m
3.76m
4.7m
6.27m
200”

10
Power Connection
1. Connect the power cord as shown below and turn on the power outlet.
2. Remove the lens cover and press the power button on the remote control to turn on the
projector.
Focus
The initial projection may be blurry and out of focus. Use the focus dial on the projector until
the projection becomes clear.
Focus

11
Keystone Adjustment
Vertical keystone correction:
1. Press the “Setting” button on the remote or on the projector to enter the settings menu.
2. Select “Projection” settings and press “OK” to enter.
3. Turn off “Auto Trapezoid” to enter the manual adjustment mode.
4. Select “4-side Trapezoid”, press OK to enter the keystone adjustment page, use the
remote control or the direction buttons of the projector to adjust the vertical
parameters in the manual keystone option until you get a vertical picture.

12
4-point Keystone Correction
Horizontal and vertical keystone correction: When the projected image is not rectangular, it
can be adjusted using 4-point keystone correction.
1.
Use the remote control or projector buttons to enter the settings menu.
2.
Select “Projection” settings and press “OK” to enter.
3.
Turn off “Auto Trapezoid” to enter the manual adjustment mode.
4. Select “4-Point Trapezoid” and press “OK” to enter, use the direction buttons of the
remote control or the projector to adjust the projected image according to the graphics.
After adjusting the current point, press the “OK” button to go to the next corner point.
5. After adjusting the 4 points, press the return key to save the current state.

13
Input Source
HDMI:
1.
Connect the projector and equipment using the HDMI cable.
2.
Press and hold the source button on the projector or remote control to enter the input
source interface or use the direction buttons to select HDMI on the main interface of the
projector.
3.
Select the HDMI cable to connect to the corresponding interface HDMI or HDMI2, press the
“OK” button to enter the interface and press the “Return” button to exit and return to the
main menu.
AV:
1.
Connect the projector and the equipment using the AV cable.
2.
Press and hold the source button on the projector or remote control to enter the input
source interface.
3.
Select AV, press “OK” to enter and press the “Return” button to exit and return to the main
menu.

14
USB:
1. Insert a USB storage device into the USB Port on the projector.
1. Select “USB” form the main menu.
2. Select from Movie, Music, Photo or Text options.
3. Confirm the file you want to play.
Connecting to Wi-Fi
1. Use the remote control or the projector buttons to enter the settings menu.
2. Select the “WIFI” settings press the “OK” button to turn on the WIFI.
3. Select the name of the Wi-Fi network to be connected, press the “OK” button to
display the virtual keyboard.
4. Enter the password and press the “OK” button to connect to the Wi-Fi network.

15
Screen Mirroring
iOS devices (streaming using Wi-Fi):
1. Ensure both the projector and your phone are connected to the same Wi-Fi network.
2. On the projector's main menu, use the remote control to select “IOS Cast”.
3. On the iOS device, slide up to enter the
options interface then select Screen
Mirroring.
4. Select the projector name “Eshare-xxxx”
to connect.
Android devices (streaming with Wi-Fi):
1. Ensure both the projector and your phone are connected to the same Wi-Fi network.
2. On the projector's main menu, use the remote control to select “Miracast”.
3. Follow the interface prompts to scan the QR code with your mobile device, download
the (Eshare) APP to your mobile device, open the (Eshare) after the download is
complete and use the mobile device mirroring function with one-click screen sharing
4. After successful connection, the screen content of the Android device will be projected
onto the projection surface.

16
MacBooks
1. Ensure both the projector and your Macbook are connected to the same Wi-Fi network.
2. On the projector's main menu, use the remote control to select “IOS Cast”.
3. Open the settings on your MacBook and find the Airplay option, click and search for the
projector.
4. Select the projector name “Eshare-xxxx” to connect.

17
Windows PC (Wireless Miracast support Window 7.8.10 system):
1. Ensure the PC and projector are connected to the same Wi-Fi network.
2. Enter the URL “http://h.eshare.app” in a browser on your computer and select the
(Eshare for Windows) option to download.
3. After the download is complete, open the Eshare APP, select one-click screen sharing
to connect to the projector.
Bluetooth
Connect to external speakers:
1. Use the remote control or the projector button to enter the settings menu.
2. Select the Bluetooth and press “OK” to enter the Bluetooth settings, select Add
accessory, a list of Bluetooth devices will be displayed.
3. Select the Bluetooth speaker from the device list to connect, then press “OK” to pair.
Note:
The projector can be connected to external speakers via Bluetooth. It can also
connect to a smartphone or tablet for music streaming via Bluetooth. In Bluetooth
mode, the projector can be used as a Bluetooth speaker.1

18
Connect the projector to phone via Bluetooth
1. Find the “BT Speaker” icon on the main menu and press “OK” to enter.
2. Enable Bluetooth of your phone, select “Projector” from the list of Bluetooth devices
and click Pair to connect.

19
Q1. Blurry Image
• Make sure the projection distance is farther than the minimum projection distance of
1.3m.
• Adjust focus ring.
Q2. The projector image shows no signal
• Ensure all cables are connected to the projector properly.
• Check whether the projector input source mode has been selected as the
corresponding format.
Q3. How do I watch streaming content (Disney+, Netflix etc.).
• Connect a Fire TV stick, Roku stick or Chromecast (not included), then connect it to the
projector to watch the content.
Q4. Remote is unresponsive
• Ensure remote points at IR receiver directly.
• Do not cover IR receiver.
• Install new (AAA) batteries.
Q5. The projector stops automatically after it is used for a period of time.
• Check if the projector's air inlet and outlet are blocked by other objects.
• Ensure the electrical outlet matches the power rating listed in the “Specifications”
section of this user guide.
TROUBLESHOOTING

20
Display Technology
LCD
Aspect Ratio
16:9/4:3/Auto
Keystone
±30°
Speaker
5Wx2
Dimensions
256.9x219.6x101.5
Supported Photo Formats!
JPG/JPEG/PNG/BMP
Supported Video Formats
3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/RMVB/MKV
Light Source
LED
Focus
Manual
Projection Mode
Front/Rear/Ceiling
Power Rating
AC 100-240V, 50/60Hz
Net Weight
2.6kg
Audio Format Supported
MP3/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A
Ports
HDMI (x2) / USB 2.0 / Audio in / AV
SPECIFICATIONS