Kogan KAPRLS03PEA User manual

S3 FULL HD SMART
PROJECTOR
KAPRLS03PEA

Read this user guide fully and carefully before using the product.
• To avoid eyes injury, do not look directly into the light from the projector.
• A direct burst of intense light can harm your eyes and cause severe damage to the eyes
of infants.
• Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, cease use immediately and contact
help.Kogan.com for support.
• Ensure the projector is a safe distance from any heat-emitting devices or the service life
of the projector may be shortened.
• To ensure a stable power supply, ensure the electrical outlet used has the appropriate
protection measures, such as grounding.
• Do not use any power cord other than the one supplied with this product.
• This product does not contain any user serviceable parts. Do not disassemble or modify
this product in any way.
• Do not place this product on any items that may block the ventilation openings (cloth,
blankets, etc.).
• This product is not waterproof, to prevent electric shock, do not expose the device to
rain or water.
• Do not place any items containing liquids near the device.
• Do not use or operate this product in a damp, humid environment.
• If this product will not be used for an extended period, disconnect the power cord.
• To avoid damage, when transporting this product, place it back in its original
packaging.
• Use the product in the environment with temperature in the range of 5~35° and do not
use it in a place below 2,000 meters above sea level.
• The camera on the device will collect projection screen information when performing
autofocus and auto keystone function, and the information will be released afterwards.
Information will not be saved or uploaded.
SAFETY WARNINGS

This product contains technology subject to certain intellectual property rights of
Microsoft. Use or distribution of this technology outside of this product is prohibited
without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReadyTM content access technology to protect their
intellectual property, including copyrighted content. This device uses PlayReadyTM
technology to access PlayReadyTM protected content and/or WMDRM-protected content.
If the device fails to properly enforce restrictions on content usage, content owners may
require Microsoft to revoke the device’s ability to consume PlayReadyTM protected
content. Revocation should not affect unprotected content or content protected by other
content access technologies. Content owners may require you to upgrade PlayReadyTM to
access their content. If you decline an upgrade, you will not be able to access content
that requires the upgrade.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States and
other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Projector
Remote Control
Power Cord
Power Adapter
User Guide
COMPONENTS

Front
Rear
Top
Bottom
OVERVIEW
Lens
Air outlet
Power input
USB
HDMI
Indicator
Earphone (3.5mm)
Remote
receiver
Speaker
grille
Power
Foot pad
Mounting
hole
Air inlet

Remote Control
Mute
Power
Netflix
Prime Video
Coloured
buttons
Coloured
buttons
Menu
Left
Ok/confirm
Return
Volume +/-
Projection mode
USB source
Focus +/-
YouTube
Web browser
Source
Up
Right
Home
Down
Number buttons
Backspace

Place the projector on a flat, stable surface and adjust the height to project onto the desired
screen or wall.
Mounting the Projector:
This projector can be mounted onto a bracket or a tripod using the hole on the bottom of
the projector. Note: Bracket and tripod are not supplied.
Mounting hole
INSTALLATION

Getting started
1. Connect the power adapter to the power input on the rear of the projector.
2. Connect the power cord to the power adapter and plug it into a power outlet.
3. Press the power button on the projector.
4. The boot screen appears.
OPERATION
Power adapter
Power
cord

Setup
1. Pairing the Remote Control
Place the remote control within 20cm of the projector and press the “OK” and “Volume -”
simultaneously. The indicator light flashes quickly to indicate the remote is pairing.
Note: If pairing fails, repeat the above step, or restart the projector
2. Projector Orientation
Select from one of the four projection modes depending on the orientation of your projector.

3. Select Language and Region
4. Data Collection and Auto Updating
• Click “Accept” to enable data collection and automatic firmware updated.
• If you wish to disable one or both options, click “View additional details” then select
other of the following options, “Accept all, Accept Automatic updates, Accept usage
information… or Decline all”.

5. Connect to Wi-Fi Network (optional)
• Select the Wi-Fi network you wish to connect to or click “Skip” to skip this step.
• Enter your password and click “OK”.
• Once successfully connected click “OK”.

6. Setup Netflix (optional)
• Click “Start Netflix” to add your Netflix account to the projector or click “Skip” to skip
this step.
• Once successfully logged into your Netflix account, click “OK”.

Focus
Press the focus adjust buttons on the remote control to adjust the focus until the picture is
sharp.
Connect Input Devices
• Use the source button to select the desired input source: USB, HDMI.
• On the remote control: Press “ ” and use the navigational buttons to select the
source then press “OK” to confirm.
USB:
• Insert a USB storage device into the USB port on the projector. You can change the
source to USB in the following ways:
• Press the “USB” button on the remote.
• Press “ ” and use the navigational buttons to select USB then press “OK” to
confirm.
• Select “Inputs” on the main menu, then select “USB”.
• Select the file you want to play.

HDMI:
• Connect your device (game console, media player, computer) into the HDMI port on
the projector. You can change the source to HDMI in the following ways:
• Press “ ” and use the navigational buttons to select HDMI then press “OK” to
confirm.
• Select “Inputs” on the main menu, then select “HDMI”.
Headphones/Speakers:
• Connect your headphones or speakers to the 3.5mm audio output on the projector.
• The projector will output all audio to the connected device.
Settings Menu
• Press the menu button to open the main menu.
• Select “Setting” in the upper right corner, press “OK” to confirm.

1. Setup: Opens the Setup menu.
• OSD Language: Select the language for the on-screen display.
• Time Setup: Adjust the time settings.
• Screensaver: Adjust the screensaver settings.
• Sleep Time: Adjust the sleep timer.
• Auto Sleep: Enable/disable Auto sleep.
• USB Auto Upgrade: Upgrade the firmware via USB.
• Internet Update Check: Check is there is an update available for the projector.
• Reset Default: Reset the projector back to factory settings.
2. Picture Mode: Adjust the picture settings

3. Audio: Adjust the audio settings
4. Bluetooth: Opens the Bluetooth settings
• Bluetooth Connection:Turns Bluetooth ON/OFF.
• Clear Paired Info:Removes connected devices.
• My Devices:Lists currently connected devices.
• Available Devices:Lists available Bluetooth devices.
5. Network: Opens the network settings.
6. Projection: Adjust the projector orientation
• Select from one of the four projection modes depending on the orientation of your
projector.

7. Keystone: Adjust the keystone of the projector.
• Auto:Turns Auto keystone ON/OFF.
• Four Points Correction:Manually adjusts the keystone.

8. Zoom: Adjust the zoom of the projector.
• Use the “Up” and “Down” navigational buttons on the remote to manually adjusts the
zoom.
• Press the “ \ ” button to save you current selection.
• Press the “ ” button to reset.
9. About: Displays information about the projector.

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com