Kogan M500 User manual

3000 LUMENS HD WI-FI
MINI PROJECTOR
(M500)
KAM500PRRA

Read this user guide fully and carefully before using the product.
• Do not look directly into the light from the projector.
• A direct burst of intense light can harm your eyes and cause severe damage to the
eyes of infants.
• Do not use or store the projector in a damp, humid environment.
• Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, stop using it immediately and contact
Kogan.com for support.
• Ensure the projector is a safe distance from other heat-emitting devices or the
service life of the projector may be shortened.
• It is strongly suggested not to use the projector for more than 6 hours consecutively.
SAFETY & WARNINGS

Projector
Remote Control
Power Cable
3-in-1 AV Cable
AAA Battery (x2)
User Guide
Warranty Card
COMPONENTS

OVERVIEW
HDMI
USB
microSD (TF)
AV input
Audio output (3.5mm)
IR receiver
Power input
Lens
Focus
Power
Mute
Fast forward
Directional button
Source
Menu
Play/Pause
Power
Rewind
Confirm
Back
Volume decrease
Top
Rear
Volume increase

Getting Started
1. Connect the projector to a power outlet using the power cable.
2. Press the power button on the projector or remote control.
3. The boot screen appears.
4. Adjust the focus ring to make the picture clear.
OPERATION

Connect Input Devices
Use the source button to select the desired signal source; USB, microSD (TF), HDMI & AV.
On the remote control: Press “ ” and press “ ” or “▲▼” to select the source. To
confirm press “OK”.
USB:
1. Insert a USB storage device into the USB port on the projector.
2. Choose “USB” on the input select screen.
3. Select the file you want to play.
microSD (TF):
1. Insert a microSD card into the microSD (TF) slot on the projector.
2. Choose “TF” on the input select screen.
3. Select the file you want to play.
PC:
1. Connect projector to a PC using a HDMI cable (not included).
2. Select “HDMI” on the input select screen.
MacBook or MacBook Air:
1. Connect the projector to a Mac using either a Type-C to HDMI adapter to connect
your MacBook or a Mini Display to HDMI adapter to connect with your MacBook Air
(adapters not included).
2. Select “HDMI” on the input select screen.
Game Console:
1. Connect the game console the projector using a HDMI cable (not included).
2. Tu r n o n b o t h t h e p r o j e c t o r a n d g a m e c o n s o l e .
3. Select “HDMI” on the input select screen.

Headphones/Speakers:
1. Connect your headphones or speakers to the 3.5mm audio output on the projector.
2. Tu r n o n t h e p r o j e c tor.
3. The projector will output all audio to the connected device.
AV:
1. Connect the projector to your AV device using the supplied 3-in-1 AV cable.
2. Tu r n o n both the projector and AV device.
3. Select “AV” on the input select screen.
Amazon Fire TV Stick:
1. Plug the TV Stick into the HDMI port of the projector.
2. Choose “HDMI” on the input select screen.
Note: only 1080P TV Sticks are supported, not the 4K TV stick
AV
AUDIO-OUT
AUDIO-OUT
Component
Component
AV
Video
Audio out(R)
Audio out
(L)
Composite cable
(not included)
Video Player
3-in-1 AV cable

Wireless Connection (Android device only):
To a c t i v a t e t h i s f u n c t i o n , your Android device must support the Multi-Screen/Wireless
display.
1. Select “Mirroring” on the input source screen.
2. Ensure your Android device is connected to the internet.
3. On your Android device use the “Multi-Screen” Function to search and connect to
the projector.
The fluency of screen mirroring with a wireless connection will be affected by the network
environment.
1. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Ensure your Android device is close to the projector when using a wireless
connection. A distance within 1 meter is recommended.

HDMI CEC:
CEC (Consumer Electronics Control) allows users to control multiple HD devices that
support CEC with one remote control, eliminating the need to use multiple remotes to
control your devices.
1. Connect device(s) which support CEC to the projector by HDMI.
2. Choose SETTING > OPTION > HDMI CEC > Device List.
3. Search for and select the device(s).

Tripod Mount Installation:
This projector can be mounted on a tripod (sold separately) using the 6mm (1/4”) thread hole
on the bottom of the projector.
6mm (1/4”)
thread hole

Display technology
LCD
Power supply
AC 100-240V 50/60Hz
Installation type
Front, rear
Focus
Manual
Speaker
2 x 3W
Dimension
16.38 x 16 x 17.19 cm
Weight
1kg
Wi-Fi protocol
2.4GHz
Light Source
LED
Resolution
576i, 576P, 720i, 720P, 1080i, 1080P
Projection size
37-170"
Projection distance
1.16-5.5m
Aspect Ratio
4:3, 16:9, Auto
Ports
HDMI, USB2.0, AV, Audio Out 3.5mm,
microSD (TF) slot
Supported audio formats
M4A(AAC), MP3
Supported image formats
BMP, PNG, JPEG
Supported video formats
MPEG1, MPEG2, MPEG4, H.264, RM,
RMVB, MOV, VC1, WMV, MJPEG, FLV
Projection Size and Distance
SPECIFICATIONS
1.15m
1.5m
1.8m
2.3m
5m
5.5m

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com