Kogan KAPRHD32LXB User manual

3200 LUMENS HD PROJECTOR
KAPRHD32LXB

Warning
Read this manual fully and carefully before using the product.
•Do not look directly into the light from the projector.
•A direct burst of Intense light can harm your eyes and cause severe damage to the
eyes of infants.
•Do not use or store the projector in a damp, humid environment.
•The power on the unit is rated at 90 ~ 240V ACS. Be aware of the outlets being
used.
•Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, stop using it immediately and contact
Kogan.com to arrange a repair.
•Ensure the projector is a safe distance from other heat-emitting devices or the
service life of the projector may be shortened.
•It is strongly suggested not to use the projector for more than 6 hours
consecutively.
SAFETY & WARNINGS

Front view
OVERVIEW
Control
Panel
Lens Cap
Keystone
Lens
Focus
Power
Source
Volume
+/Right
Menu
Enter
Volume-
/Left
IR Receiver
Channel-/Down
Channel+/Up

Bottom view
These 4 holes are also be used for ceiling mounting.
(Press the “Flip” option on the remote to invert the projector display after ceiling mounting).
Support Base
Support Base

Rear view
Power
USB Port x 2
HD Port x 2
VGA Port
Audio Output
AV Port
IR Receiver

Remote Control
Mute
Play/Pause
Previous/Next
Up
Volume +
Right
Down
Menu
Exit
Volume-
Power
Source
Left
Confirm
Backward/
Forward

1. Adjust the projector’s angle before starting – see below:
Incorrect
Correct
Incorrect
2. Connect the power plug: a blue light will illuminate once the projector is powered
on.
OPERATION

3. Press the “Power” button ( ) on the control pane or remote control to turn on the
projector.
Control panel
Remote control

4. Keystone and Focus.
a. If the projected image is trapezoidal, it can be resolved by Keystone correction.
b. If the projected image is blurry or difficult to see, adjust the focus as below:
Turn right or left to adjust
Turn right or left to
adjust

5. Projection Distance and Size:
The image size depends on the distance between projector and screen; there may be
a 3% deviation among above-listed data. Different settings cause various distances.

USB Input
Insert a USB flash drive into the USB port and select the appropriate input then press
Play/Pause button ( ) to play or pause media.
HDMI Input
Connect an HDMI device to the projector. Press “Source” on the remote control and select
the appropriate input.
Input Source
AV
PC-RGB
HDMI 1
HDMI 2
USB 1
USB 2
CONNECTIVITY

VGA Input
Connect a device with VGA out put to the projector and select the “PC-RGB” source.
Note that VGA does not carry sound.
Audio Out (3.5mm)
Connect headphones or external speakers to the projector’s 3.5mm output.
AV Input
Connect a 3-in-1 composite AV cable to the projector. Press “Source” on the remote control
and select the appropriate input.

Mobile Phone
1. MH1 Cable (supported Android or iOS devices)
2. Lighting Digital AV Adapter (supported iOS devices)
MH1 Cable
HDMI Cable
Lighting Digital AV Adapter

3. Google Chromecast / Apple TV (HDMI input)

Bluetooth
To connect to an external Bluetooth player:
1. Press MENU on the projector or remote control to turn the OSD menu on and
press >to select the SOUND menu.
2. Press ˅to highlight the BT Mode Sub-menu.
Press OK or >to making various adjustments and settings.
Distance
less than
8M
Bluetooth wireless
speaker

Bluetooth Auto Mode
•Automatically identify Bluetooth devices that have been turned on. The device list
is grey and Bluetooth devices are nots selectable.
Bluetooth Static Mode
•View Bluetooth devices and connect manually by entering the device list, moving
the cursor over the Bluetooth device name and pressing >to unpair.
•Press >to refresh the Bluetooth Device List.
Note:
The projector’s speaker is muted when paired with a Bluetooth device. After unpairing from
a Bluetooth device, the projector speakers will be active again.
After unpairing from a Bluetooth device, you can only pair again in Auto moei

Image Format
Support
File Extension
JPEG, PNG, BMP, MPO
.jpg/.png/.bmp
Audio Format
Support
File Extension
MPSG1, MPIG2, WMA, LPCM, MP3
.avi/.wmv/.ts/.dat/.vob/.wav/.mkv/.mp3
Some audio formats, such as Dolby AC3/AAC, DTS, etc., are not supported for normal
models.
Video Format
Support
File Extension
MPEG1, MPEG2, H.263, H.264, AVS,
VC1, MJPEG, RV30/RV40, HEVC
.dat/ .ts/ .mp4/ .mpg/ .mpeg/ .avi/ .mkv/ .mov/
.wmv/ .asf/ .flv/ .3gp./ .3gpp/.tp/.trp
Unsupported video formats: MSVC / CRAM, MP42, GMC, IV32, DIE, Ovid, RV20.
SPECIFICATIONS

While unpacking the package, check and confirm all the accessories are accounted.
Projector
AV signal cable Power plug
Remote controller (without
battery)
User guide
lens clean cloth
Support Base x 4
IN THE BOX

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com