Kogan KASBD150HA User manual

DOLBY ATMOS SOUNDBAR
WITH BUILT-IN SUBWOOFER
3.1.2 CHANNEL 150W
KASBD150HA

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
• Do not place the soundbar in wet or high temperature areas.
• Do not place the soundbar in humid areas.
• Do not place the soundbar under direct sunlight.
• Do not attempt to disassemble the soundbar yourself.
• Do not allow any particles or liquids to fall into the soundbar. If any falls, cut off the
power supply immediately. Cease use and contact help.Kogan.com for support.
• In the case occurrence of malfunction, do not attempt to repair the unit on your own.
Contact help.Kogan.com for support.
• Don’t install the unit in or near a place where it may come in contact with rain, moisture
or other liquids.
SAFETY & WARNINGS

Control Panel
Name
Description
Power/mode button
• Short press to turn the soundbar on/switch
modes.
• Long press to turn the soundsbar off
Play/pause button
Used to play/pause tracks
Next track button
Short press the button to play the next track.
Previous track button
Short press the button to play the previous track.
Volume dial
• Rotate clockwise to increase volume.
• Rotate counter-clockwise to decrease volume.
OVERVIEW
Pause/Play
Next track
Volume dial
Power/mode
Previous track

Ports
1. HDMI (eARC): Enhanced Audio Return Channel, enables you to transmit the
original full resolution audio signal through an HDMI cable (not provided).
2. HDMI IN: Use to connect compatible devices (e.g. TV box, DVD) using a HDMI
cable.
3. USB IN: Use to connect a flash drive for direct media playback (FAT32 format and
64GB max).
4. AUX IN: Use to connect compatible devices using the 3.5mm – 3.5mm stereo jack
cable (provided).
5. COAXIAL IN: Use to connect compatible devices using a coaxial cable (not
provided).
6. OPTICAL IN: Use to connect compatible devices using an optical cable (not
provided).
7. AC IN: Use to connect the soundbar to a power supply.
8. ON/OFF: Use to turn the soundbar on/off.
AC100-240V 50/60Hz
ON
OFF
1
2
3
4
5
6
7
8

Remote
LED Display
1. HDMI: HDMI mode
2. BT:Bluetooth mode
3. USB: USB media mode
4. AUX: Auxiliary input mode
5. OPT: Optical mode
6. EARC/ARC: HDMI ARC mode
7. COAX: Coaxial mode
8. Red LED: Standby
Power button
Volume increase button
Previous button
EQ button
Mode button
Bluetooth button
Bass increase button
Bass decrease button
3D button
Mute button
Play/pause button
Next button
Volume decrease button
Repeat button
Treble increase button
Treble decrease button

• Power on/off: Press the Power on/off button on the remote control or soundbar control
panel to turn the unit on and off.
• HDMI IN: Connect a compatible device (e.g. TV box, DVD) to the HDMI IN port on the
soundbar using an HDMI cable and connect a TV to the HDMI eARC port on the
soundbar using a HDMI cable. Select HDMI mode by pressing the MODE button on the
remote control or soundbar control panel until HDMI is displayed on the LED display.
Adjust the volume of soundbar by pressing the Volume up and Volume down buttons
on the remote control or soundbar control panel.
• HDMI (eARC): Connect a compatible device (e.g. TV box, DVD) to the HDMI IN port on
the soundbar using an HDMI cable and connect a TV to the HDMI eARC port on the
soundbar using a HDMI cable. Select HDMI mode by pressing the MODE button on the
remote control or soundbar control panel until EARC is displayed on the LED display.
Adjust the volume of soundbar by pressing the Volume up and Volume down buttons
on the remote control or soundbar control panel.
• AUX in: Connect a compatible device using the 3.5mm – 3.5mm stereo jack cable.
Select AUX mode either by pressing the AUX button on your remote control or
repeatedly pressing the MODE button on the soundbar control panel until AUX is
displayed on the LED display. Ensure the connected device is producing an audio
signal, then adjust the volume of soundbar using the Volume up and Volume down
buttons on the remote control or soundbar control panel.
• Optical in: Connect a compatible device to the OPTICAL input on the soundbar using
a digital optical cable (not supplied). Select OPT mode either by pressing the OPT
button on your remote control or repeatedly pressing the MODE button on the
soundbar control panel until OPT is displayed on the LED display. Ensure Optical SPDIF
or External device output is selected as the TV’s audio output, then adjust the volume
of the soundbar using the Volume up and Volume down buttons on the remote control
or soundbar control panel.
• Coaxial in: Connect a compatible device to the COAXIAL input on the soundbar using
a digital coaxial cable (not supplied). Select COAX mode by repeatedly pressing the
MODE button on the soundbar control panel until COA is displayed on the LED display.
Ensure Coaxial or External device output is selected as the TV’s audio output, then
adjust the volume of the soundbar using the Volume up and Volume down buttons on
the remote control or soundbar control panel.
OPERATION

• Bluetooth: Short press the BT button on the remote control or repeatedly pressing the
MODE button on the soundbar control panel until BT is shown on the LED display. The
LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure
that the device you wish to connect is also in pairing mode and search for “HD-059AT”
in its device list. When the two devices are paired, the LED display on the soundbar will
stop flashing and remain constant. (The soundbar will now automatically re-pair with
this device whenever it is within range and has Bluetooth turned on.) Once paired, the
remote control can be used to play, pause and navigate between tracks on compatible
iOS and Android devices.
• USB media mode: The soundbar is compatible with USB flash drives of up to 64GB in
size and can play audio files directly. Insert a compatible drive into the USB port on the
back of the soundbar and the unit will automatically switch to USB mode and play the
first compatible track. The media controls on the remote control can be used to play,
pause and navigate between tracks on the flash drive and the LED display will indicate
the current track time.
USB repeat mode (also accessed via the remote control) enables single track repeat
(ONE), all track repeat (ALL).
The media player also has a memory function that will recall and continue from the
last-played point when a USB flash drive that has previously been used with the
soundbar is reinserted.
• Equalizer modes: The soundbar has three equalizer default settings which tailored to
different music style. Press the EQ button on the remote control to choose among
Music mode (EQ1), Movie mode (EQ2), News mode (EQ3).
Using DOLBY ATMOS
1. Ensure the connected device and the content supports Dolby Atmos.
2. Set the audio format on the connected device (for example, Blu-ray player, TV) to
either “Bitstream”, “Auto” or “Bypass” to skip the encoding process. This allows the
soundbar to receive the non-decoded audio signal.
Note:
Hold the BT button on the remote control to disconnect the Bluetooth connection
between the phone and the soundbar; short press to switch to BT mode.
Note:
Dolby Atmos is only available in HDMI IN and HDMI eARC modes.

Audio output
160W RMS
Speaker drivers
L/R Channel (58x90mm) 20Wx2 + 2.5”
Sky Channel 20Wx2
Mid Channel (58x90mm) 20Wx1 + 3.5" woofer 30Wx2
Frequency
50Hz~20KHz
SNR
>=70dB
Bluetooth version
5.0
Bluetooth range
Up to 10m
Connections
USB, AUX in, Optical, Coaxial, HDMI IN, HDMI (eARC), AC IN
Power supply
AC 100-240V
Dimensions
1113x165x75mm
SPECIFICATIONS

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com