Komshine KIP-600V User manual

KIP-600V fiber inspection probe instruction manual
Description of external and function keys
Switch machine and LCD display
1 3
4
5
2
M OK
M OK
OK
M OK
M OK
1
2
4
5
3
8
7
6
9
Switch:Turn the device on or off
1
Silicone case: shock-proof, drop-proof, dust-proof
2
Display: display the cleaning state of the end face
3
Record key: record measurement information, support
information playback.
4
M key: select different modes for testing.
5
▽key：Switch to the next page
6Setting key 7
Zoom in and out
8△key：Switch to previous page
9
Long press the " " key for
more than two seconds，the meter
will be turn on. Press this key for
more than two seconds again to
turn off the instrument.Using 3.5-
inch high-definition LCD display to
further improve the display
brightness and clarity, there by
avoiding visual fatigue.
Press the " " button to do the
real time recording and record
measurement information,It supports
data return，easy to check and
statistics.The " " key can be switched
between 200X and 400X
magnifications, It is clear to view
cleanliness of the fiber end face.
"M”Key can convert capture, save
and viewing page.The setting key
can set the time,Language etc.
M
Up and down keys to scroll through
the saved pictures and videos.
Up and down key switch
Modes and settings
Record， zoom in and out

KIP-600V fiber inspection probe instruction manual
Product characteristics and use
6Products features 8
Product specification
7
Detect fiber end face
Screw a connector on the fiber inspection probe to match
the port you wanna test.To install a new connector, first to unscrew
the installed connector, and then screw on the new connector.
Detector interface
USB interface can be read and charged
SD card port
USB port
Fiber inspection probe list
1
Press the power button for 4 seconds to boot.
2
Turn the focus wheel until the picture on the monitor is clear.
3
KIP-600V
3.5 -inch
LCD display
Image
Video
Hard drive
format
Power supply
Magnification
Resolution（µm）
Visual range（μm）
Size（μm）
Image sensor
Storage temperature
Weight(kg)
Image size（mm）
Pixel
Frequency
LCD screen
Video output mode
Playback mode
Compatible memory card
Capacity
USB
Hard drive format
AC adapter
Internal battery
Media Player
400X
surpass 1.0
0.316*0.285
235(W)*95(D)*30(H)
1/3 480
-18℃~35℃
0.11
22
307200
25FPS
960*240 LCD
NTSC/PAL
AVI
TF
8GB
1.1/2.0
FAT32
DC 5V/2A
4000mAh lithium battery
≥7
Weight and size
(kg)/W*D*H(mm) 0.085/78*22*56
Fiber inspection probe
Standard connector: LC/PC; SC/PC;
1.25mm connector; 2.5mm connector
SD card and card reader
To avoid eyes damage, please do not look directly at the probe
during use, unless you understand and take relevant measures.
To avoid possible fire, electric shock, personal injury or damage
to the optical fiber detection probe,
Please :
USB data cable
Do not disassemble the machine, there are no user-usable
parts inside the machine.
Use the charger dedicated for the machine to charge the
battery.
Safety warning
Warning!
Charge it for about 4 hours before the first use. Use the USB data
cable to charge the machine. After the fully charged,it can be used
continuously for 7 hours.
Charge
400 times magnification, stains are clearly visible.
Support SC/FC/ST/LC/SC female/LC female.
4000mAH large capacity lithium battery,
20 hours standby.
3.5-inch high-definition LCD display.
1/3 inch sensor, 300,000 effective pixels.
Support TF card, record and replay video, convenient
for testing data archiving.
Small size, can be held with one hand,
convenient and fast.
Rotatable metal bracket, stable and convenient.
Upper interface
Lower interface
Contact us:
KOMSHINE TECHNOLOGIES LIMITED
Tel : [phone]
Email : [email protected]
ADD : 2F Bldg. D Qinheng Tech. Pk.
Nanjing，Jiangsu, 210001, China
Website ：www.KomShine.com