Konica Minolta PagePro 1300W Configuration guide

PagePro 1300W
GeneralInformation
Guide
®
1760486-001A
4136-7744-01A

2
Locate your Printer...
 On a surface capable of supporting the printer, consumables, and media.
 A surface can be tested for levelness with a standard round pencil.
If the pencil rolls, the surface is not level. Clear the area of any
obstruction or items such as cables that might prevent the printer
from sitting directly on the flat, level surface.
 If the printer is located in a cold room that is rapidly heated, or if the printer
is moved from a cold place to a warm, humid place, condensation may
occur within the printer, degrading print quality. If this occurs, allow the
printer to adapt to the environment for about one hour before use.
 If using a humidifier or water vaporizer in the room with the printer, use
only purified or distilled water. Impurities in the water may be released into
the air, where they can accumulate inside the printer and cause degraded
printer output.
Component Weight
Printer 15.45 lb (7 kg)
Printer with consumables (such as
toner cartridge and drum cartridge) 17.20 lb (7.8 kg)
With these characteristics... But away from...
On a hard, flat, stable, level (±1° or
less slant at any point around the
machine).
Direct sunlight. Heating and cooling
sources, extreme temperature or
humidity changes, wind, and dust.
Open flamesor items that can easily
burn.
Close to an easily accessible
grounded power supply (on an
exclusively dedicated power outlet)
that meets printer specifications.
Near your computer. At the length
6.5 ft. (2 m) or less for an IEEE 1284
bidirectional parallel connection.
A connection to the same electrical
circuit as high-current machines.
Noise-generating equipment, such
as a copier or air conditioner, and
strong magnetic or electromagnetic
fields, such as a refrigerator.
With enough space to allow
adequate ventilation and easy
servicing.
Water, water pipes, liquid (drink)
containers, and corrosive chemicals
or vapors, such as ammonia.
With an ambient temperature range
of 50°–95° F (10°–35° C) and
relative humidity range of 15%–85%
(noncondensating).
Small, loose metal parts, such as
paper clips and staples.
At an altitude of 0–10,170 ft.
(0–3,100 m). Excessive vibration.

3
CAUTION
Obstructing the ventilation grilles could present a fire hazard.
WARNING!
For products installed outside North America, do not connect the
groundwire to gas or water pipes or grounding for telephones.
Safety Information
Laser Safety
This is a page printer which operates by means of a laser. There is no possi-
bility of danger from the laser, provided the printer is operated according to
the instructions in this manual.
Since radiation emitted by the laser is completely confined within protective
housing and external covers, the laser beam cannot escape from the
machine during any phase of user operation.
Internal Laser Radiation
Maximum average radiation power: 36.903 µW at the laser aperture of the
print head unit.
Wavelength: 770-800 nm.
This product employs a Class 3b Laser Diode that emits an invisible laser
beam. The Laser Diode and the Scanning Polygon Mirror are incorporated in
the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM. Therefore, the print
head unit should not be opened under any circumstances.
Laser aperture of the print
head unit.

4
Laser Safety Label
CAUTION
Use of controls, adjustments, or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 15
mW and the wavelength is 770-800 nm. A laser safety label is attached to the
back of the printer.
For United States Users-CDRH Regulation
This printer is certified as a Class 1 Laser product under the Radiation Perfor-
mance Standard according to the Food, Drug and Cosmetic Act of 1990.
Compliance is mandatory for laser products marketed in the United States,
and is reported to the Center for Devices and Radiological Health (CDRH) of
the U.S. Food and Drug Administration (FDA) of the Department of Health
and Human Services (DHHS). This means that the product does not produce
hazardous laser radiation.
The label shown above indicates compliance with the CDRH regulations and
must be attached to laser products marketed in the United States.
For European Users-CE Marking (Declaration of
Conformity)
This product complies with the following EU directives: 89/336/EEC, 73/23/
EEC, and 93/68/EEC directives. This declaration is valid for the area of the
European Union (EU) only.
This device must be used with a shielded parallel interface cable and
shielded USB interface cable. The use of non-shielded cables is likely to
result in interference with radio communications, and is prohibited under 89/
336/EEC rules.

5
Ozone Release
During printer operation, a small quantity of ozone is released. This amount is
not large enough to harm anyone adversely. However, be sure the room
where the printer is being used has adequate ventilation, especially if you are
printing a high volume of materials or if the printer is being used continuously
over a long period.
Support Information
Wherever inthe world you have installed your printer,the top three sources of
support are the same.
1. Your Vendor
In many cases, your local vendor may be best equipped to help you. Your
vendor may have specially trained technicians available to answer questions
and has the equipment to analyze your situation.
2. Your Application Vendor
Often, “printing” problems have more to do with the application being used
than with the printer itself. In this case, the application manufacturer is the
best source of help.
3. Information on the web
KONICA MINOLTA provides extensive information on the web. Here you will
find general information about the KONICA MINOLTA products and technical
support information aiding you in using your product in the best possible man-
ner. To access your local website, please refer to www.minolta-qms.com and
select your country.
Technical Support
When you need support by telephone, fax, or e-mail, please gather the fol-
lowing information. Have it ready to tell a technician if you call or include it in
your fax or e-mail, so our technicians can help you more quickly.
 The printer model and serial number
 Your phone and fax number, e-mail address, shipping address
 A description of the problem
 The type of host computer you’re using

6
 The type and version of operating system you’re using
 The interface you’re using and protocol (for example, TCP/IP for
network)
 The application and version you’re using
 The emulation (for example, PostScript, PCL, or GDI) of the file
you’re trying to print (listed on the Config page)
 A Configuration Page or Startup Page
KONICA MINOLTA Contacts
Worldwide Contact Information
The Americas
Internet www.minolta-qms.com
Support via
Internet www.minolta-qms.com/support, then click on Answer Base
Service via
Internet www.minolta-qms.com/service
Q-Shop www.q-shop.com
Order products, accessories, and consumables directly
from Konica Minolta Printing Solutions USA Inc.
Font & Form
Center www.minolta-qms.com/products/font center/index.html
Address One Magnum Pass
Mobile, Alabama 36618
Information via
Telephone [phone] (toll-free US) Information on KONICA MINOLTA products, supplies,
and accessories, and on the authorized
KONICA MINOLTA reseller or service provider nearest
you
Where to Buy &
Authorized
Service Provider
via Internet
www.minolta-qms.com/buy.html
US and Canada only Find resellers and authorized ser-
vice providers near you

7
Technical Support and Service Requests
Support via
E-mail www.minolta-qms.com/support/supportmail/index.html
Telephone [phone] (toll-free US, Canada, Mexico)
7:00 am–7:00 pm Central Time (closed national holidays)
Also use this number for information about service, installa-
tion, maintenance pricing, on-site service and depot repair,
and service provider uninstall and repack
Fax,
Latin America 1 [phone]
Mexico Service
Mexico City
Rest of Mexico 52-70-5900 (Hardware only) 01-800-0032500 (Hardware only)
Spare Parts Ordering and Information
Lusk &
Associates 1 [phone] www.lusknet.com
National Parts
Depot 1 [phone] (Option 1) www.nationalparts.com
Font & Form Center
Telephone [phone]FONT
General Contacts
Telephone
US
Latin America
Canada
1 [phone]
1 [phone]
1 [phone]
Fax
US
Canada
Latin America
1 [phone]
1 [phone]
1 [phone]
E-mail [e-mail]
Internet
US/Canada
Latin America www.minolta-qms.com/usa.html www.minolta-qms.com/Latin_America

8
Europe, Middle East and Africa
Asia-Pacific
Address Edisonbaan 14-E
3430BL Nieuwegein
PO Box 1491
The Netherlands
Telephone Please contact your local vendor, or visit
euro.minolta-qms.com and select your country to find local
support information.
E-mail [e-mail]
Internet euro.minolta-qms.com
Australia
Address 44 Hampden Road
Artarmon NSW 2064
PO Box 364
Artarmon NSW 1570
Telephone
Fax [phone] [phone]
Technical Sup-
port Helpline 1800 456 999 (toll free Australia)
E-mail [e-mail]
People’s Republic of China
Address Unit 3008, Di Wang Commercial Centre
Shun Hing Square
5002 Shen Nan Dong Road
Shenzhen, 518008
Telephone
Fax [phone] [phone]
Technical Sup-
port Helpline [phone] (toll free PR China)
Hong Kong
Address 12/F, 1063 King’s Road
Quarry Bay
Hong Kong
Telephone
Fax [phone] [phone]

9
Japan
Technical Sup-
port Helpline 001 800 7746 8377 (toll free Hong Kong)
Malaysia
Address 1, Jalan 13/6
46200 Petaling Jaya
Selangor
Telephone
Fax [phone] [phone]
Technical Sup-
port Helpline 1800 7746 8377 (toll free Malaysia)
Singapore
Address Balmoral Plaza
271 Upper Bukit Timah Road #03-06
Singapore, 259708
Telephone
Fax [phone] [phone]
Technical Sup-
port Helpline 1800 735 4498 (toll free Singapore)
Address Sumitomofudousan Shiba Bldg. 11 4F
1-5-9, Shiba, Minato-ku
Tokyo, 105-0014 Japan
Telephone
Fax [phone]
E-mail [e-mail]