Konig SEC-CAM901 User manual

SEC-CAM901
SPEED DOME CAMERA


SPEED DOME CAMERA 

Note::
•Read this manual carefully before installation and
operation. Keep it handy for later reference.

SPEED DOME CAMERA 

CONTENTS
FEATURES······························································2
DECLARATION······················································3
Precaution····················································3
Warnings······················································3
INSTALLATION PREPARATION·······················4
Tool List························································4
Cables ···························································4
Dip Switch Setting·····································4
MOUNT TYPE·························································5
Wall Mount···················································5
INSTALLATION GUIDE········································6
Wall Mount···················································7
SYSTEM CONNECTION······································8
OPERATION INSTRUCTION······························9
PREHEATING SCREEN ···························9
Boot-up Screen··········································9
Access Main Menu····································9
MENU OPERATION ············································10
Selecting Items·········································10
Changing Items········································10
Editing Titles·············································10
SYSTEM INFO ······················································11
System info················································11
Site info·······················································11
Display Setup············································11
Boot-up Screen········································12
Password ···················································12
Set Default ·················································12
System Reboot·········································12
LENS PARAMETERS·········································13
Digital Zoom··············································13
Joystick AF/AI ··········································13
AF Resume Time ·····································13
AI Resume Time·······································13
Iris ALC ·······················································13
CAMERA PARAMETERS··································14
White Balance···········································14
BLC Mode···················································14
PAN/TILT PARAMETERS ·································14
Auto Stop Time········································14
Speed Amplify··········································14
Proportional P/T·······································14
Set North ····················································14
AUTO RUNNING··················································15
Preset ··························································15
Tour······························································15
Cruise··························································16
Pattern·························································16
Zone ·····························································17
Park Time ····························································17
ALARM····································································18
APPENDIX I: DIP SWITCH SETTING·············19
Dip Switch Position ································19
Protocol and Baud Rate Setting·········19
Dome Address Setting ··························20
Address Setting Chart···························21
Resistor Jumper Setting·······················23
Alarm Output Method Setting··············23
APPENDIX II: WIRE DIAMETER &
TRANSMISSION CHART ··································24
APPENDIX III: RS485 BUS BASIC
KNOWLEDGE·······················································25
APPENDIX IV: TROUBLE SHOOTING··········26
APPENDIX V: LIGHTNING & SURGE
PROTECTION ·······················································27
APPENDIX VI: WARRANTY································28

SPEED DOME CAMERA 

FEATURES
Product Features
Multiple Integrated Camera/Optics Packages
Graceful outlook, Vandal proof available
System preheat in low temperature environment
Programmable Multi-protocol
360° continuous pan, 180° Tilt “Auto Flip”
4 tours(27 presets/tour), 4 patterns, 4 cruise
8 titled zones
Port for Software up-grade
Built-in Alarm, 7 Inputs/2 Outputs
Built-in Surge and Lightning Protection
Speed Amplify to fit different control keyboard
Auto Running Memory Against Power Outage
Auto Running Resume after Manual Operation
On-Screen display for compass and tilt angle,
System and environment temperature, fan status
Dome Drive Unit
360° continuous pan, 180°Tilt “Auto Flip”
Discreet Liner with Sealed Fixed Bubble
220 presets, ±0.1° preset accuracy
300°/s Pan/Tilt Preset Speed
4 tours max. 27 presets/tour
4 patterns, 4 cruises, 8 titled zones
OSD Menu password protection
Built-in alarm, 7 input/2 output
Multiple RS485 protocol/Coaxial
Locations of Labels and On-Screen Displays
Software Up-gradable
FIFO alarm priority levels
Alarm driven Pattern, preset etc.
Position Resume After Alarm
Variable Cruise Speed 0.1-150°/sec
OSD Menu for Programmable Functions
Proportional Pan/Tilt Speed
Vertical Tilt Unobstructed 0° to -90°
Auto Running Memory Against Power Outage
Auto Running Resume after Manual Operation
System preheat before camera power on
On-Screen display for compass and tilt angle,
System and environment temperature, fan status
Environment
Operating Temperature
Model Absolute Max Sustained Max Absolute Min Sustained Min
In-Ceiling Indoor 32° to 122°F (0° to 50°C)
Standard Pendant 113°F (45°C) 95°F (35°C) -4°F (-20°C) 14°F (-10°C)
Environmental Mount 140°F (60°C) 122°F (50°C) -60°F (-51°C) -50°F (-45°C)
Note:
1. Assume no wind chill factor
2. Prevents icing at sustained minimum of -50°F (-45°C)
3. De-ices 0.1 inch (2.5 mm) within 3 hours after power-up
TECHNICAL SPECIFICATIONS
Electrical
Input Voltage 16-30 VAC; 24 VAC nominal
Input Power 10 VA nominal (w/o heater)
45 VA nominal (with heater)
Fuse 1.25A
Auxiliary Outputs 2 Alarm Inputs 7
Built-in Surge Protection
Limited Lightning Protection
General
Construction
Back Box & Housing
Die-cast Aluminum
Dome Drive Aluminum, thermo
plastic
Bubble Acrylic/Poly Carbon

SPEED DOME CAMERA 

Camera/Optics
Image Sensor 1/4” Super HAD
Resolution 480TVL
Lens 22X f=3.6~79.2mm
Digital Zoom 22X10
Angle of View 47°~2.2°
Sync system Internal/external
Min. Illumination 0.25Lux
S/N Ratio >48db
Iris Auto/Manual
White Balance Auto/Manual
Gain Auto
AE Control Auto
BLC On/Off
Privacy Mask No
Focusing system Auto
Video Output 1.0±0.2Vp-p
DECLARATION
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense.

PRECAUTIONS:
Only qualified and experienced person can carry out the installation. In many countries and areas
licensed personnel is required
Always take safety codes into consideration during installation.
Use reliable tools only, poor quality tools may cause damage to both human and property
Check the strength of all item onsite that are related to installation in advance. It is recommended
that the stand of dome be 8 times stronger than the weight of the dome and its accessories.
Keep all the original dome package materials in case of future repacking and transportation.
Choose and install speed dome according to environment requirement (Refer to the Product
Features). This product conforms to IP66 standard as specified in “Housing Protection Classification
(IP code)”.

WARNINGS:
Avoid installing this speed dome in hazardous places where inflammable or explosive materials are
stored or used.
Indoor dome is not designed for outdoor environment.
This speed dome runs on 24v AC.
Connect to power only after completing installation.
Disassemble can only be carried out by qualified personnel.
Use soft towel to clean the down cover when necessary. Avoid using caustic detergent.
Avoid aiming camera to strong light.

SPEED DOME CAMERA 

INSTALLATION PREPATATION

TOOL LIST:
Following tools may be needed for the installation:
1. Screws and nuts
2. Philips screw driver
3. Standard screw driver
4. Wire scissors
5. Ladder
6. Drill
7. Saw.

CABLE:
8. Video Coaxial Cable
9. 75

impedance,
10. Solid copper wire,
11. 95% braided copper shield.
Check the max transmission distance referring to the chart below.
Model Distance
RG 59/U 750ft(229m)
RG 6/U 1,000ft(305m)
RG 16/U 1,5000ft(457m)
12. RS485 Cable
13. 0.56mm (24AWG) twisted pair wire

DIP SWITCH SETTING
See appendix I :
14. Protocol and Baud rate
15. Dome address
16. Video cable type
17. Resistor jumper
18. Alarm output method


SPEED DOME CAMERA 

MOUNT TYPE

WALL MOUNT


SPEED DOME CAMERA 

INSTALLATION GUIDE

WALLMOUNT

Check carefully to make sure the wall is firm and does not peel off. It is required that the wall can withstand 8
times weight of the dome set.
1. Mark mounting position
Use bracket to mark the mounting position on
wall
2. Install bracket.
Conduct allcables through the holeof bracket, and
fix bracket on the wall
3. Release the connection board

Unscrew to release the circuit board on
connection board
4. 4. Install housing
Conduct cables through the hole on top of the
housing. Align the fast connector to bracket and fix
with 2 M5 screws.
NOTE: Apply water-prooftape to the thread in the
case of outdoor dome.
5 Connect cables.
Plug cables into corresponding sockets on circuit
board. Reinstall the circuit board and turn on the
power. The red LED is on if connections are
correct. Turn off the power after checking.
NOTE: Names of the interfaces are marked on
terminal block or PCB. Connect cables as picture
shows. Make sure power is off before connecting.
6. Set domeID, baud rate and protocol.
Set dome ID, bard rate and protocol by configuring
DIP switches (see APPENDIX I ). Remove the
packing sponges.

SPEED DOME CAMERA 

SW1 SW2
7. Down cover preliminary installation.
Attach thesafety chain with a M3 nut as picture
shows.
NOTE: Plug the heater wiring into socket on
heater in the case of outdoor dome
8. Install black linerand Pan/Tilt Module. Push the
black liner into the two tabs. Install the pan/tilt
module with two clips, match color of AMP sockets.
Gently push the module upward untilhearing the
click. NOTE: Remove
the lens cover
9. Install down cover
Unscrew the two M4 screw on down cover ring.
Push up the down coverinto the housing and then
fasten down cover with two M4 screws.
NOTE: Apply lube to the O-ring in the case of
outdoor dome

SPEED DOME CAMERA 

SYSTEM CONNECTION

SPEED DOME CAMERA 

OPERATION INSTRUCTION
Speed domecan be driven through combination of hot keys on a keyboard controller. It can also be driven
through OSD menu. OSD menu can be activated by preset #95 call or double calling preset 1 (call twice within 5
seconds). Preset calling can be done through a keyboard controller or any other device (e.g. a computer ) that
can send proper command to the speed dome.
OSD menu operations are specified as follow:

PREHEATING SCREEN

When power on the dome and system temperature is
under -15C/5F

following screen shows up:
Outer Temp :-030C/-022F
System Temp: -020C/-004F
Fan Speed :6480rpm
System Under -15C/5F
System Heating Up
Please Wait……
System heats up till the system temperature is above
-15C/5F. System starts to boot up after heating up
finishes.
< Outer Temp >
Environment temperature XXC/XXF C

Celsius

F

Fahrenheit
< System Tem >
System inner temperature
< Fan Speed >
The rotating speed of fan.

BOOT-UP SCREEN

When power on or restart the dome, the boot up
information will display on screen and then the dome
will conduct self-testing.“System booting up…” will
show on the screen until “boot-up success” shows up.
The whole boot up process lasts about 40 seconds.
This screen display disappears once the dome receives
any effective command.
Protocol : Ernitec
Baud Rate : 4800BPS
Camera ID : 001
Camera S/N : 8888888888
Model : -------------
Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Booting Up… …
Pt l
Dome control protocol.
<Baud Rate>
Dome control baud rate

<Camera ID>
The dome ID address set by dip-switch or
keyboard. (See APPENDX I)
<Camera S/N>
Camera serial number

<Model>
Speed dome model number.
<Version>
Hardware and software version

Protocol : Ernitec
Baud Rate : 4800BPS
Camera ID : 001
Camera S/N : 8888888888
Model : -------------
Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Bootup Success

ACCESSING MAIN MENU

Display the dome’s main menu on your monitor
by calling preset 95 or calling preset 1 twice
within 5 seconds.
Note: For third party keyboard controller please
read manuals. As command to a preset may not
be the same among different manufacturers.
In case password protection is in effect, user
needs to input the correct 6-bit password to
enter the OSD menu. (Default password is
123456).
To enter password, move the joystick up or
down to select number (0-9), move the joystick
left or right to choose password digit. If the
input password is wrong, the password input
window will disa
pp
ear.

SPEED DOME CAMERA 

minute without any operation. All the settings
will be saved automatically to protect against
power outage.
MENU OPERATION

SELECTING ITEM

In the main menu, the cursor flashes on the left
side. Move the joystick up or down to point to the
desired item. And then, move the joystick right to
select the item.
Select an item to enter its sub menu or run a
specific function or change its value or edit its title.

CHANGING VALUES

Move the joystick up or down to change the value,
move the joystick left to save the setting and exit.
In the case of multiple digits value,move left or
right to select digits, move up or down to change
value, move left to savethe setting and exit.
Note: To increase the value changing speed, hold
the joystick up or down for more than 10 seconds.
For example: In order to change BLC LEVEL,
please follow these steps
1. Call preset 95 or call preset 1 twice within 5
seconds to access the Main Menu.
System Info
Lens
Camera
Pan/Tilt
Auto Running
Alarm
Exit
2. Move the joystick down to point the cursor to
<Camera >, move the joystick right to select it.
Select BLC MODE in the same way
White Blance: Auto
BLC Mode
Back
NOTE: Here-in-after menu paths are written in the
following format:
<Main Menu>

<Camera >

<BLC Mode>

<BLC Level>
3. The <BLC Level> option blinks. Move the
joystick up or down to change the option, move
the joystick left to save the changing.
BLC Level: off
Back
When finished, select <Back> to return to upper
menu.

SPEED DOME CAMERA 

SYSTEM INFO

SYSTEM INFO

<Main Menu>

<System >
Site Info
Display Setup
Bootup Screen
Password
Set Default
System Reboot
Back
SYSTEM INFO includes following settings.
<Site Info>
Dome ID, name, broadcast address.
<Display Setup>
Screen display.
<Bootup Screen>
Display boot-up information.

<Password>
Change password.
<Set Default>
Restore factory default settings.
<Reboot System>
Reboot dome system.

SYSTEM INFO

<Main Menu> <System > <Site Info>
Site ID: 007
Name: 0000000000
Broadcast Add: 255
Back
<Site ID> shows the current dome’s ID. Each
domehas its unique ID. ID ranges from 001 to
254.
NOTE: <Site ID> can be set by menu only when
DIP switch is set to programmable ID.
Move the cursor to <Site ID> and then move the
joystick right to enter dome ID setting, sub-menu
as follow.
Site S/N :8888899999
In
p
ut S/N:0000000000
Move the cursor to <Input S/N> and then move
the joystick right, input the serial number
according to the <Site S/N>, and then turn the
joystick left to exit setting. Point cursor to <Back>,
and turn joystick right to exit. Finally, turn
joystick up or down to select desired ID number.
When finished, move the joystick left to save the
settings.
<Name> is the title of the dome.Assigning a name
to a dome helps user to remember which dome it
is. <Broadcast Add> is used to set
broadcast ID number. The ID functions the same
as dome’s site ID, default setting is 255. The dome
responds to commands sent to either ID. Refer to
<Changing Values> to learn how to set broadcast
address)
Select BACK to return to upper menu.

DISPLAY SETUP

<Main Menu>

<System >

<Display
Setup>
Site Name: On
Preset Title: On
Cruise Title: On
Pattern Name: On
Zoom: On
Orientation: On
Zone Name: On
Back
By switch on and off user can choose the items to
display on screen when the dome is running.
<Site Name>
Choose to display site name.
<Preset Title>
Choose to display cruise title when the dome
is cruise.
<Cruise Title>
Choose to display preset title when calling
preset.
<Pattern Name>
Choose to display pattern title when the
dome is replaying pattern sequences
<Zoom>
Choose display the current zoom times

<Orientation>
Choose to dis
p
la
y
the current lens
p
ointin
g

SPEED DOME CAMERA 

<Zone Name>
Choose to display the current zone title
Select <Back> to return to upper menu


BOOT-UP SCREEN

<Main Menu>

<System >

<Bootup Screen>
Protocol : Ernitec
Camera ID : 001
Baud Rate : 9600bps
Protocol : Default
Model :

Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Call Preset 1 To Back
Boot-up info displays summary information of the
dome. Values are fixed in this sub-menu. Refer to
“Boot-up Info” to check the item. Call preset 1 to
return to upper menu.

PASSWORD
<Main menu>

<System >

<Password>
Input Password:******
Confirm :******
PSWD Protection: On
Back
<Input Password>
Move joystick right to enter
submenu.
Old Password:******
Back
< Old Password >
Enter the old password.
< Back >
If old password is correct, cursor goes back
behind <Input Password>, so that new
password can be input. If old Password is
not correct, cursor goes back to front of
<Input Password>. Password can not be
changed in this case.
<Confirm>
When and only when new password is
entered, user can get to this menu item. If
password is not the same as entered the first
time, it remains unchanged..
< PSWD Protection>
Switch on and off the password protection.
to access main menu or save preset through
keyboard.
NOTE: The dome’s default password is
123456. Contact the supplier for the master
password if forget the password after
changing.
Select BACK to return to upper menu

SET DEFAUT

<Main Menu>

<System Info>

<Set Default>
Site Info
Display Setup
Initial Information
Password
Set Default
System Reboot
Back
Select <Set Default> to restore factory
default settings.
List of Default Settings:
Item Default Value
Zoom S
p
eed Hi
g
h
Di
g
ital Zoom Off
AI/AF Resume Mode Both
AF Resume Time 005
AF Resume Time 005
Iris ALC 084
Iris PlC 016
Da
y
/Ni
g
ht Auto
all dis
p
la
y
confi
g
Off
Frame Limit 1/25
Shutter Off
Ex
p
osure Off
White Balance Auto
BLC Level 000
S
p
eed Am
p
lif
y
Off
Pro
p
ortional P/T On
Pswd Protection Off
Park Time Off
Park Action Off
Arm/Disarm Disarm
Reset Dela
y
004

SYSTEM REBOOT

<Main Menu>

<System >

<System Reboot>
Site Info
Display Setup
Initial Information
Password
Set Default
St Rbt

SPEED DOME CAMERA 

Back
Select <System Reboot> to reboot the dome.
Settings will not change after restarting
LENS PARAMETERS
<Main Menu>

<Lens>
Digital Zoom : Off
Joystick AF/AI : Both
AF Resume Time: 005
AI Resume Time : 005
Iris ALC Value : 042
Day/Night : Auto
Back

DIGITAL ZOOM

<Main Menu>

<Lens>

< Digital Zoom>
Digital zoom magnify the picture by
duplicating pixels. The picture is enlarged but
the resolution remains unchanged.
[Off] Turn off digital zoom (Default setting)

JOYSTICK AF/AI

<Main Menu>

<Lens>

<Joystick AF/AI>
Set automatic restore mode. When the joystick
moves, the selected function will be triggered.
Options are:
[Both] Joystick movement triggers both auto
focus and auto iris (default).
[Focus] Joystick movement triggers auto focus
only.
[Iris] Joystick movement triggers auto iris
only.
[None] Joystick movement triggers none of the
functions.

AF RESUME TIME

<Main Menu>

<Lens>

<AF
Resume time>
automatically adjusts the focus to get the clear
image.
Focus can also be manually controlled by
keyboard or matrix. For manual operation
details, please refer to keyboard or matrix
operation manual.
This item sets the time to restore auto focus
after focus is manually changed. The default
setting is 005.
[Off] Never restore auto focus after switch to
manual.
[001-255] The dome will start auto focus that
number of seconds after user manually adjust
focus.
NOTE: The camera may not be able to auto
focus in the following circumstances:
Target is not in the center of image.
Near and far targets in the same picture
can not be both clear.
Target is a strong light object. Such as
spot light etc.
Target is behind the glass with water
drop or dust.
Target moves too fast.
Large area target such as wall.
Target is too dark or vague.
<Joystick AF/AI> is set None or
<Joystick AF/AI> is set [Iris], and Auto
Focus is set to [off].


AI RESUME TIME
<Main Menu>

<Lens>

<AI Resume
Time>
Light goes through iris and reach CCD to
form an image. Larger iris lets more light goes
through and the image will be brighter. Iris
can be controlled automatically or manually.
For manual operation detail, please refer to
keyboard or matrix manual.
[Off] Never restore auto iris after switch to
manual.
001-255 The dome will start auto iris that
number of seconds after user manually adjust
iris


IRIS ALC

SPEED DOME CAMERA 

<Main Menu>

<Lens>

<Iris ALC Value>
Set the iris average level control value. The
value could be 000~255. Default value: 23X
color/mono camera: 084
NOTE: Keep the default value is strongly
recommended..
CAMERA PARAMETERS
<Main Menu>

<Camera>
White Balance: Auto
BLC Mode
Back

WHITE BALANCE

<Main Menu>

<Camera>

<White Balance>
White balance is normally compensated for by
the automatic white balance gain control. In
some lighting conditions, user may want to
manually adjust the red and blue settings for
optimal viewing. The setting options are:
[AUTO] Auto white balance (default setting).
[MANUAL] Manually set the red and blue
values. Move the joystick right to enter the
manual setting. The following window will
appear.
WB-R : 000
WB-B : 000
Back

R Gain (000-255)

Adjust RED color depth


B Gain (000-255)

Adjust BLUE color depth


BLC MODE
<Main Menu>

<Camera>

<BLC Mode>
R Gain (000-255), Adjust RED color depth.
B Gain (000-255), Adjust BLUE color depth.
If the backlight is bright, the objects in the
center of the picture may appear dark. The
dome can auto adjust the brightness of the
whole image according to the brightness of
center point. Thus backlight compensation can
increase the brightness of the objects in the
center of the picture.
If the backlight is too dark, the object on the
center of the picture may appear dark. So,
backlight compensation can decrease the
brightness of the object.
Select BLC MODE and the editing menu will
pop up.
[000] Disable backlight compensation function.
001-255 Choose different backlight compensation
grade Greater value means more back light

BLC Level: 000
Back

AUTO STOP TIME
<Main Menu>

<Pan/Tilt>

<Auto Stop
Time>
For some particular protocols, the dome will
not stop moving even there is no operation on
joystick. This menu item sets the time after
which the dome receives last control command.
[Off] Disable this function (default setting)
[001~255] The time (unit : 50ms) that dome will
stop moving without receiving any commands


SPEED AMPLIFY

<Main Menu>

<Pan/Tilt>

<Speed Amplify>
Some protocols’ controlling speed is much
lower, set [Speed Amplify] to accelerate domes
movement. Options are as below:
[Off] Disable this function (default setting)
[01

~ 32

] Times greater than original
speed.

PROPORTIONAL P/T
<Main Menu>

<Pan/Tilt>

<Proportional
P/T>
The dome moves at a speed of certain degree
per second. Objects on screen move much
faster in wide scope than in tele-scope. Even
too faster in some case. This function decreases
the dome movement speed while zooming in.
[On] Enable (default setting)
[Off] Disable

SET NORTH

Mi M P/TiltStN th

SPEED DOME CAMERA 

joystick to position north
When select <Set North>, following menu will
pop out.
[Back] Select it to back to main menu.
NOTE: Be better to set geographic north.
Auto Stop Time: Off
Speed Amplify: Off
Proportional P/T: Off
Set North
Back
AUTO RUNNING
<Main Menu>

<Auto Running>
System Info
Lens
Camera
Pan/Tilt
Auto Running
Alarm
Exit

PRESET

<Main Menu>

<Auto Running>

<Preset>
Preset
Tour
Pattern
Cruise
Zone
Park Time: Off
Park Action: Off
Back
“Preset” is the point that user save for frequent
use. A “preset” saves both direction and zoom
parameter, the camera will quickly and precisely
go and zoom to a specific point if a “preset” is
called. E.g. If you often want to watch the door,
you can set the point of door as a “preset”, then
you can survey the door simply by calling the
“preset”.
NOTE: 220 presets can be set.
<Preset No>: Display current preset number,
the value ranges from 001 to 220. Move joystick
up or down to select desired number.
<Title>: To set current preset title. Move the
joystick right to enter <Title>, and then move
joystick right to desired bit and move the joystick
up or down to select desired letter.
Preset Number : 001
Title: PRE1
Set Current
Test Current
Remove Current
Back
NOTE: You can edit 16 bits of letters at most. If
you are not familiar with the editing, please refer
to “Operation Instruction”.
SETTING Select this item to set the preset
position and zoom. The following menu will pop
up when < Set Current > is selected
Call Preset 1 To
Confirm……….
Move to the desired position and zoom to a
suitable level, call preset 1 to save the current
preset.
< Remove Current> Select it to delete the preset
with the number and title display above. <Back>
Select it to back to upper menu.


TOUR

<Main Menu>

<Auto Running>

<Tour>
Tour Number : 001
Dwell: 001
Edit
Test
Run
Back
A “tour” is a sequence of presets. When running a
tour the camera moves from preset to preset and
dwell for specific time for each preset. It is useful
if you need to repeat switching among a number
of presets. E.g. A shopping mall has several
entrances. A tour can automatically loop the
position of each entrance.
NOTE: 4 tours can be set in the system. Each tour
can contain up to 27 presets and the dwell time
for each preset is independent.
<Tour Number.> shows current tour number.
Values are 001 004

SPEED DOME CAMERA 

each preset. Value ranges from 0~99. For example,
DEFAULT DWELL: 001, all presets’ dwell time
is set as 1 second, but user can still set
independent dwell time for each preset in <Edit>
menu.
<Edit> Edit presets and corresponding dwell time
in a tour as follows.

Preset-Dwell
001-001 002-004 003-002
004-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
Save And Back
Cancel And Back
Item format is Preset number-Dwell time
For example 003-02 means go to preset 003 and
dwell for 2 seconds. Move joystick left or right to
select editing item. Move up or down to change
value.
In the above example the tour starts from preset 1
dwells for 1 second, then goes to preset 2 dwell for
5 seconds, then preset 3 for 2 seconds and finally
preset 4 for 1 second.
<Save and Back> Save the tour and exit
<Cancel and Back> Quit without saving
NOTE: When a preset dwell time is set 0, system
will skip that preset. System will consider preset 0
as the end of a tour.
NOTE: No delete function applied to tour, edit it
again to replace the previous data.
<Test>: To run the current tour once. Use this
function to check the tour.
<Run>: To run the current tour continuously.
System will loop the tour.
<Back>: Back to upper menu.

CRUISE

<Main Menu>

<Auto Running>

<Cruise>
Cruise Number : 001
Left Position
Right Position
Default Speed: 001
Run
Back
Th d f l ft i t t i ht i t
NOTE: Camera pans only.
NOTE: Zoom to desired level then run auto scan,
the camera will keep that zoom.
This speed dome has max. 4 cruise lines.
<Cruise Number>
Display the current auto scan number. Values are
001~004. Move joystick right then up or down to
select values.
<Left Position>
Set the position of site A.
Following menu will pop up.
Call Preset 1 To
Confirm……
Move the camera to the desired position and call
preset 1 to save.
<Right Position> set another site’s position. Set it
in the same way as <Left Position>
<Cruise Speed> Set the scanning speed (camera
movement speed). Value ranges from 001 to 255,
the greater number represents the higher speed.
Move joystick right to select, up or down to
change the value.
<Run> Start the current auto scan (001~004)
<Back> Back to upper menu.
PATTERN
<Main Menu>

<Auto Running>

<Pattern>






Pattern is a replay of recording of irregular
pan/tilt/zoom operation. It is useful when
repeating variable speed movement of the
pan/tilt/zoom.
Note: There can be as many as 4 patterns
recorded, each not more than 3 minutes.
<Pattern Number:> Display pattern number,
value options are 001

004

Pattern Number: 001
Record
Test
Run
Back

SPEED DOME CAMERA 

<Record> Record pattern
<Test> Test recorded pattern
<Run> Run Pattern until other command
received
<Back> Back to upper level menu
When getting into <Record> following menu pop
up.





User can operate dome doing pan/tilt/zoom as
needed. The system records the operation. To end
recording user can call preset 1 to confirm. The
current pattern recording is finished.

ZONE
<Main Menu>

<Auto Running>

<Zone>
Zone Number: 001
Title: 000000000000000
Left Limit
Right Limit
Remove Current
Pan Speed

001
Run
Back
A zone is an area between two points. User can set
a zone and scan it automatically.
<Zone> is similar to <Cruise> except user can
assign a title for a ZONE. Whenever the camera
moves into the zone, the title will display on the
screen to alert the operator.
NOTE: Camera scans horizontally only. User can
set up to 8 zones.
<Zone Number.>
Display current zone number. Values are 001~008.
Pan right then tilt up or down to select desired
value.
<Title>
Set the zone title. Select the desired letter or
number. Repeat above procedure to complete the
title editing.
Set the position of the first point. The following
picture shows the setting menu.
Call Preset 1 To
Confirm……..
<Speed> Set the scanning speed
(camera movement speed). Value ranges from 001
to 255, the greater number represents the higher
speed. Pan right to select, tilt up or down to
change value.
RUN To start scanning the current zone
(001~008).
BACK Back to upper menu level.
<Pan Speed>
Setup pan speed
PARK TIME
<Main Menu>

<Auto Running>
Preset
Tour
Pattern
Cruise
Zone
Park Time: Off
Park Action: Off
Back
This function let the system automatically run an
assigned function after a specific period of idle
time. For example: the dome is running a tour
and an operator breaks the tour to do other work,
the dome can automatically carry on the tour
within a period of time after the operator stops his
operation.
<Park Time>
Park time means a period of idle time without any
operation.
The values includes: OFF, 001~255.
[Off]: Disable this function.
[001~255]: Auto run a function after the number
seconds of idle time.
<Park Action>
Park action refers to the function that system will
automatically run when park time is up.
The function could be:
Call preset 1 To
Confirm ……..
X/100
Record

SPEED DOME CAMERA 

[Pre 001~220] Call preset 001~220
[Scan 001~004] Run auto scan 001~004
[Tour 001~004] Run tour 001~004
[Pat 001~004] Run pattern 001~004

Preset
Tour
Pattern
Cruise
Zone
Park Time: 010
Park Action: Pat 001
Back
In this example, system will run Preset-8 after
38 seconds of idle time
ALARM
<Main Menu>

<Privacy Mask> Alarm in 1: Off
Alarm in 2: Off
Alarm in 3: Off
Alarm in 4: Off
Alarm in 5: Off
Alarm in 6: Off
Alarm in 7: Off
Relay 1: Off
Relay 2: Off
Arm/Disarm: Disarm
Interval<S>: 004
Back
This model of speed dome has 7 alarm input
channels and 2 output. Alarm input signal can
come from other devices such as infrared detector
and alarm output signal can go to light and DVR
etc.
<Alarm in 1 ~ Alarm in 7>
Channel 1 has the highest priority and channel 7
has the lowest priority. Set the alarm input and
the dome’s corresponding action. Following
options are applicable.
[Off] Disable the alarm input (default )
[Pre 001~220] Call preset 001~220
[Scan 001~004] Run auto scan 001~004
[Tour 001~004] Run tour 001~004
[Pat 001~004] Run pattern 001~004
NOTE: There are two alarm output methods: NO
and NC, refer to Appendix I for setting details.
For example:
Alarm in 1 : Pre. 001
Al i 2 P t 003