Korenix JetBox 5630 User manual

JetBox 5630
HW User Manual
www.korenix.com
0.0.1

2
Overview | Korenix
Copyright Notice
Copyright© 2014 Korenix Technology Co., Ltd.
All rights reserved.
Reproduction without permission is prohibited.
Information provided in this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for any infringements upon the
rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change without
notice. While reasonable efforts have been made in the preparation of this document to assure
its accuracy, Korenix assumes no liabilities resulting from errors or omissions in this document,
or from the use of the information contained herein.
Korenix reserves the right to make changes in the product design without notice to its users.
Acknowledgments
Korenix is a registered trademark of Korenix Technology Co., Ltd.
All other trademarks or registered marks in the manual belong to their respective
manufacturers.

Table of Content
Copyright Notice ....................................................................................................................2
Acknowledgments..................................................................................................................2
Table of Content ....................................................................................................................3
Chapter 1 Overview ........................................................................................................................4
Chapter 2 Hardware Specification..................................................................................................5
Chapter 3 Hardware Feature ..........................................................................................................7
3-1 Mechanical Outline........................................................................................................7
3-2 Front Panel.....................................................................................................................9
3-3 Bottom View ................................................................................................................10
3-4 Wiring the Power Inputs..............................................................................................10
3-5 Grounding JetBox.........................................................................................................10
3-6 I/O Connectors.............................................................................................................11
3-6-1 Ethernet (RJ-45) ...................................................................................................11
3-6-2 SFP........................................................................................................................11
3-6-3 USB 2.0 (HOST).....................................................................................................11
3-6-4 RS232/422/485 (DB9) ..........................................................................................12
3-6-5 Console.................................................................................................................12
3-6-6 Reset Button ........................................................................................................12
3-6-7 SD Card Slot..........................................................................................................12
3-7 JetBox 5633Gf-w USB Holder.......................................................................................13
3-8 System Login ................................................................................................................15
Chapter 4 Customer Service .........................................................................................................15

4
Overview | Korenix
Chapter 1 Overview
One of the advantages of adopting Korenix JetBox series industrial computers is ready-to-use. All
these years, Korenix is devoted to enhance usability and functions of embedded computers in
industrial domain. Korenix operating system provides device drivers, protocol stacks, system
utilities, supporting services and daemons to make system integration simple. Besides, Korenix also
provides application development toolkits for users to build their own applications easily.
The stylish compact JetBox 5630Gf-w series are industrial layer 3 VPN routers with Linux computing
capability. It is a gateway to connect different network groups such as Ethernet and serial control in
a complex networking architecture and manage peripherals at the front-end site. With Gigabit
Ethernet, fiber connection and ability of network redundancy, JetBox 5630Gf-w series can be
applied in crossroads or highway for flow control and traffic monitoring of remote transportation
control. Besides, JetBox 5630Gf-w series are designed with features of compact, reliable and robust
to adopt in various industrial vertical markets with hazardous environment such as transportation,
surveillance and environmental monitoring.

Korenix | Hardware Specification
5
Chapter 2 Hardware Specification
JetBox 5630Gf-w
JetBox 5633Gf-w
Interface
Ethernet Switch
LAN
10/100/1000 Base-TX RJ-45 x3
Built‐in 15KV ESD protection of all signals
10/100/1000 Base-TX RJ-45 x3
Built‐in 15KV ESD protection of all signals
WAN
100/1000 Mbps SFP fiber/
10/100/1000 Base-TX RJ45 combo x1
100/1000 Mbps SFP fiber/
10/100/1000 Base-TX RJ45 combo x1
RS232/422/485
x1 (DB9), default RS232, RS485 support
4-wire only
x1 (DB9), default RS232, RS485 support
4-wire only
USB 2.0 (Host)
x1, Supporting devices: USB flash,
wireless dongle
x3, Supporting devices: USB flash,
wireless dongle
SD card slot
x1
x1
Wireless
--
USB x2 for 3G/Wifi/GPRS dongle
expansion
System
Processor
TI AM3352 720MHz ARM Cortex-A8
TI AM3352 720MHz ARM Cortex-A8
System memory
512MB DDR2 SDRAM
512MB DDR2 SDRAM
System flash
256MB, up to 100MB free space for
customized program storage
256MB, up to 100MB free space for
customized program storage
Console
3-pin header (RS232 interface)
3-pin header (RS232 interface)
LED per RJ45 port
(on the port)
Ethernet Port: Link (Green on) /
Activity (Green blinking)
Ethernet Speed: 1000Mbps (Amber
on) / 10 or 100Mbps (Amber off)
Ethernet Port: Link (Green on) /
Activity (Green blinking)
Ethernet Speed: 1000Mbps (Amber
on) / 10 or 100Mbps (Amber off)
LED per unit
Power Status, System: On (Green on)
2 x Status for Customization (Green
or Amber)
Fiber Status: 1000Mbps (Green on) /
100Mbps (Amber on)
Power Status, System: On (Green on)
2 x Status for Customization (Green
or Amber)
Fiber Status: 1000Mbps (Green on) /
100Mbps (Amber on)
RTC
Battery backup external RTC
Battery backup external RTC
Battery
Ultra-Capacitor (DIP type)
Ultra-Capacitor (DIP type)
Watchdog timer
Embedded hardware watchdog timer to
auto reset system when system failure
Embedded hardware watchdog timer to
auto reset system when system failure
Power on/off
switch
x1
x1

6
Hardware Specification | Korenix
Reset button
x1, reboot: 3 seconds/reset default: 7
seconds
x1, reboot: 3 seconds/reset default: 7
seconds
DC input
DC 9~36V power input with polarity auto
reverse protection
DC 9~36V power input with polarity auto
reverse protection
Power
consumption
10W
18W
ME
Housing IP rating
IP30 Sheet Metal
IP30 Sheet Metal
Color
Silver
Silver
Dimension (mm)
160(H) x 118(D) x 47(W)
160(H) x 118(D) x 80(W)
Net weight
0.9kg
1.2kg
Mounting
DIN-rail
DIN-rail
Operating temp.
-40 ~ 75°C, 0 ~ 95% RH 
-40 ~ 75°C, 0 ~ 95% RH 
Storage temp.
-40 ~ 80°C, 0 ~ 95% RH 
-40 ~ 80°C, 0 ~ 95% RH 
OS support
Embedded Linux
JetOS56 (kernel 3.2)
JetOS56 (kernel 3.2)
Certificate
EMI
CISPR 16-1-2/ 16-2-1/ 16-2-3 / 22, FCC
Part 15 Subpart B Class A, ANSI C63.4
Heavy Industrial IEC/EN61000-6-4
CISPR 16-1-2/ 16-2-1/ 16-2-3 / 22, FCC
Part 15 Subpart B Class A, ANSI C63.4
Heavy Industrial IEC/EN61000-6-4
EMS
Heavy Industrial IEC/EN 61000-6-2, IEC
61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC
61000-4-8, IEC 61000-4-9
Heavy Industrial IEC/EN 61000-6-2, IEC
61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC
61000-4-8, IEC 61000-4-9
Shock
IEC60068-2-27
IEC60068-2-27
Bump
IEC60068-2-29
IEC60068-2-29
Vibration
IEC60068-2-64
IEC60068-2-64
Free Fall
IEC60068-2-32
IEC60068-2-32
Railway EMC
EN50121-1/-4 (Compliance)
EN50121-1/-4 (Compliance)
Warranty
5 years
5 years

Korenix | Hardware Feature
7
Chapter 3 Hardware Feature
3-1 Mechanical Outline
JetBox 5630Gf-w appearance
JetBox 5630Gf-w mechanical outline
(160 x 47 x 118 mm)

8
Hardware Feature | Korenix
JetBox 5633Gf-w appearance
JetBox 5633Gf-w mechanical outline
(160 x 118 x 80 mm)

Korenix | Hardware Feature
9
3-2 Front Panel
The front panel includes 3 x 10/100/100 RJ-45 LAN ports, 1 x Gigabit RJ-45/SFP combo WAN port, 1
x RS232/422/485, USB 2.0 sockets and diagnostic LEDs.
JetBox 5630Gf-w
JetBox 5633Gf-w
LED: PWR, S1, S2, SFP
Gigabit RJ45 LAN x3
USB2.0
RS232/422/485
2-pin terminal block
Combo WAN x1:
100/1000 SFP
10/100/1000 RJ45
IP30 Steel Metal Design
Compact Size
Combo WAN x1
Gigabit RJ45 LAN x3
USB2.0
RS232/422/485
2-pin terminal block
Mechanical holder for
USB dongle
USB2.0 x2

10
Hardware Feature | Korenix
3-3 Bottom View
The bottom side of the JetBox 5630Gf-w series is shown below.
3-4 Wiring the Power Inputs
JetBox 5630Gf-w series accepts 9~36V DC power input.
1. Insert the positive and negative wires of your DC supply into the V+ and V- contacts of the
terminal block connector. The recommended working voltage is DC24V (DC9~36V).
2. Tighten the terminal screws to prevent the DC wires from loosening.
Pin
Signal Name
1
VCC
2
GND
3-5 Grounding JetBox
There is one grounding screw on the bottom side, and please connect the frame grounding of
system to the grounding surface to ensure safety and prevent noise to interfere communication.
Power On/off Switch
Terminal Block
Reset Button
Console Port
Earth Grounding Screw

Korenix | Hardware Feature
11
3-6 I/O Connectors
3-6-1 Ethernet (RJ-45)
JetBox 5630 series provide three RJ-45 LAN ports and one RJ-45/SFP combo WAN port. The RJ-45 is
standard RJ‐45 jack socket.
1 8
Pin
Signal Name
1
MDX0+
2
MDX0-
3
MDX1+
4
MDX2+
5
MDX2-
6
MDX1-
7
MDX3+
8
MDX3-
3-6-2 SFP
JetBox 5630 series provide one RJ-45/SFP combo WAN port. Please don’t connect Ethernet RJ-45
and SFP transceiver at the same time or use wrong SFP spec which does not match with SFP speed
setting, or exception conditions would happen. (Default speed: Gigabit)
To change SFP speed you need to reboot the system to make it effective.
3-6-3 USB 2.0 (HOST)
USB type “A” female connectors for USB peripherals.
Pin
Signal Name
1
VCC
2
DATA-
3
DATA+
4
GND

12
Hardware Feature | Korenix
3-6-4 RS232/422/485 (DB9)
JetBox 5630 series provide one serial port (DB9). (Default: RS232, RS485 support 4-wire only)
15
6 9
Pin
RS-232
RS-422
RS-485
(4-wire)
1
DCD
RXD-
RXD-
2
RXD
RXD+
RXD+
3
TXD
TXD+
TXD+
4
DTR
TXD-
TXD-
5
GND
GND
GND
6
DSR
7
RTS
8
CTS
9
RI
3-6-5 Console
JetBox provides one 3‐pin connector Console port for debug use.
13
Pin
Signal Name
1
TXD
2
RXD
3
GND
3-6-6 Reset Button
This button is used to make the system reboot or reset to the factory default.
Press 3 seconds for system reboot.
Press 7 seconds to reset the JetBox to the factory default.
3-6-7 SD Card Slot
This socket is used for a SD Card and users can put their own applications in it.
To access the SD card, you can follow these steps:
1. Unscrew five screws of back cover (Please refer to the picture below).
2. Then remove the back cover and you can insert or take out the SD card.

Korenix | Hardware Feature
13
3-7 JetBox 5633Gf-w USB Holder
JetBox 5633Gf-w has extra two USB slots for 3G/wifi USB dongle expansion.
To tighten the USB dongle, you have two methods and you can follow these steps:
Use the platen to fix the dongle
1. Slightly loosen the screws and move the platen to appropriate height according to the size of
dongle.
2. Plug the dongle into USB socket.
3. Move the platen to press the dongle and tighten the screws.
Please do NOT loosen the screws too much or the kits would fall off from JetBox.
SD card slot inside
This screw is for fixing SD card,
please do not unscrew it.

14
Hardware Feature | Korenix
Use cable ties to fix the dongle
1. Take out the cable ties from accessories kit.
2. Use the cable tie to thread through the rear side of guide plate.
3. Surround the USB dongle then tie up the cable tie.
Loosen the screws and move the
platen to appropriate height.
After plug the USB dongle, move
the platen to press the dongle
and tighten the screws.
Use the cable tie to thread
through the rear side of guide
plate.
Surround the USB dongle then tie
up the cable tie.

Korenix | Customer Service
15
If the kits fall off from JetBox, you can refer to below picture to assembly.
3-8 System Login
There’re two methods to login JetBox 5630. One is from web GUI, the other is from Linux console.
Detail information please refers to Linux and Web user manual.
Web GUI
Login: admin
Password: admin
Console
Login: root
Password: (none)
Chapter 4 Customer Service
Korenix Technology Co., Ltd.
Business service: [email protected], [email protected]
Customer service: [email protected]
Web Site: http://www.korenixembedded.com, http://www.korenix.com