Korenix JetNet 3810G Series User manual

Korenix JetNet 3810G Series
JetNet 3810(Gf)/ 3806G/ 3710G
Industrial Power over Ethernet GbE Switch
User’s Manual
Version: 1.0
Date: 10-July, 2015
www.korenix.com

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
1
Korenix JetNet 3810G Series
JetNet 3810(Gf)/ 3806G/ 3710G
Industrial Power over Ethernet GbE Switch
User’s Manual
Copyright Notice
Copyright © 2015 Korenix Technology Co., Ltd.
All rights reserved.
Reproduction in any form or by any means without permission is prohibited.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
2
Index
Index...............................................................................................................................2
1. Introduction ...............................................................................................................3
1.1 Overview ..........................................................................................................4
1.2 Product Features ..............................................................................................5
2. Hardware Installation.................................................................................................6
2.1 Hardware Introduction ............................................................................................6
Dimensions.....................................................................................................6
Front Panel .....................................................................................................8
Bottom View ................................................................................................10
LED Indicators...............................................................................................10
2.2 Wiring the Power Inputs................................................................................12
2.3 Wiring the Relay Output ................................................................................13
2.4 Wiring Earth Ground......................................................................................14
2.5 DIP Switches...................................................................................................14
2.6 Wiring the Ethernet Ports..............................................................................15
2.7 Wiring the Fiber Ports (only JetNet 3810Gf) .................................................16
2.8 Connecting Powered Device (PD) ..................................................................17
2.9 DIN-Rail Mounting Installation.......................................................................18
3. Appendix ..................................................................................................................19
3.1 Product Specification .....................................................................................19
3.2 Revision History..............................................................................................21

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
3
1. Introduction
Korenix JetNet 3810G Series is a power over Ethernet rail switch that is specially
designed for industrial or commercial applications. The following topics are covered
in this chapter:
1.1 Overview
1.2 Product Features

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
4
1.1 Overview
JetNet 3810G series, Industrial Power over Ethernet (PoE) GbE Switches, are designed
with 8/4 Fast Ethernet PoE ports and 2Gigabit uplink ports to ensure high-bandwidth
uplink connection for wide PoE markets. This series include JetNet 3810G/ 3806G/
3710G which are all compliant with IEEE 802.3af PoE standard to deliver maximum
15.4Watts per port. For JetNet 3810G/ 3806G model, it integrates with Korenix
patented power boost technology- Input DC 12~24V boosting to 48V built-in power
booster which is the best solution for the vehicle PoE applications with standard DC
48V power supply unavailable. For fiber Switch series such as JetNet 3810Gf, it
combines hot-swappable SFP fiber transceiver interfaces which can meet different
specifications of fiber cable for extending transmission distance.
To ensure the high quality of video data transmission, JetNet 3810G series not only
provide Gigabit bandwidth uplink for large image traffic, but also support QoS to
adjust the priority of data transfer. With the feature of Fault Relay, JetNet 3810G
series could automatically warn administrator if any abnormal situation happens. The
compact size with IP-30 rigid aluminum case allows JetNet 3810G series to be reliably
operated in -25~60℃extreme environment.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
5
1.2 Product Features
Korenix JetNet 3810(Gf)/ 3806G/ 3710G have the following features:
JetNet
3810G
JetNet
3810Gf
JetNet
3810f
JetNet
3806G
JetNet
3710G
Features Highlight
10/100 TX PoE port
8
8
8
4
8
10/100/1000 TX uplink port
2
2
2
Giga FX SFP
2
100 FX SFP
2
PoE Standard compliant:
IEEE802.3af PoE
Yes
Yes
Yes
Yes
Yes
PoE Power per port
15.4W
15.4W
15.4W
15.4W
15.4W
Total PoE Power Budget
65W*
65W*
65W*
60W*
65W*
Quality of Service
Yes
Yes
Yes
Yes
Yes
Fault relay alarm
Yes
Yes
Yes
Yes
Yes
Aluminum Case Protection
IP30
IP30
IP30
IP30
IP30
Operating Temperature
-25~60℃
-25~60℃
-25~60℃
-25~60℃
-25~70℃
Power Input
12~24V
power input,
48V PoE
output
12~24V
power input,
48V PoE
output
12~24V
power input,
48V PoE
output
12~24V
power input,
48V PoE
output
48V power
input, 48V
PoE output
*Specifications may change without prior notice

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
6
2. Hardware Installation
2.1 Hardware Introduction
Dimensions
JetNet 3810(Gf) dimensions: 149.0(H) x 131.2(W) x 66.0(D) (with Din-rail clip)

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
7
JetNet 3806G dimensions: 149.0(H) x 131.2(W) x 66.0(D) (with Din-rail clip)
JetNet 3710G dimensions: 149.0(H) x 131.2(W) x 66.0(D) (with Din-rail clip)

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
8
Front Panel
JetNet 3810G/ 3710G includes system power LED x1, alarm relay LED x1, PoE LED x8;
and 20 LEDs for the port operating status.
JetNet 3806G includes system power LED x1, alarm relay LED x1, PoE LED x4, and 12
LEDs for the port operating status.
JetNet 3810G/ 3710G JetNet 3806G
Power LED
Alarm Relay LED
PoE Indicators
LED for RJ-45 port
RJ-45 ports for
10/100Mbps
RJ-45 ports for
10/100/1000M
bps

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
9
JetNet 3810Gf/ 3810f includes system power LED x1, alarm relay LED x1, PoE LED x8,
16 LEDs for RJ-45 port operating status, and 4 LEDs for SFP fiber port status.
Power LED
Alarm Relay LED
PoE Indicators
LED for RJ-45 port
LED for fiber speed
LED for fiber LNK/ACT

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
10
Bottom View
The bottom side of the JetNet 3810(Gf)/ 3710G includes one 4-pin removable
terminal block connector (with 1 power input & 1 relay alarm output) and one 10-Pin
DIP Switch for ports link failure alarm (6-Pin DIP Switch for JetNet 3806G). There is
also an earth ground screw to prevent interference.
LED Indicators
The following table describes the function of each LED indicator.
LED
Status
Description
PWR
Green
DC-IN Power Jack is On
Off
No Power in DC-IN
Alarm
Red
Ports link failure occur
Off
No failure is found
PoE LED
Status
Description
PoE 1~8
Green
The port is delivering PoE power.
Off
No PD is attached.
10/100 TX Port LED
Status
Description
LNK/ACT
Green on
RJ-45 port is attached with partner.
Earth Ground Screw
Terminal Block
Relay Output
DIP Switch

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
11
Blinking
RJ-45 port is transmitting or receiving
packets.
Off
RJ-45port’s link is inactive
FDX/COL
Yellow on
Link with partner on Full Duplex mode.
Blinking
Data collision is occurred.
off
RJ-45 port’s link is inactive or link as Half
Duplex mode.
For JetNet 3810G/ 3806G/ 3710G
GbE TX Port LED
Status
Description
LNK/ACT
Green on
RJ-45 port is attached with partner.
Blinking
RJ-45 port is transmitting or receiving
packets.
Off
RJ-45port’s link is inactive
Speed
Yellow
Blinking
3 blinks per order –1000Mbps
2 blinks per order –100Mbps
1 blinks per order –10Mbps
off
RJ-45 port’s link is inactive
For JetNet 3810Gf/ 3810f
GbE FX Port LED
Status
Description
LNK/ACT
Green on
Fiber port is attached with partner.
Blinking
Fiber port is transmitting or receiving
packets.
Off
Fiber port’s link is inactive
Speed
Yellow
Blinking
3 blinks per order –1000Mbps*
2 blinks per order –100Mbps**
off
Fiber port’s link is inactive
*NOT supported in JetNet 3810f
** 100M fiber is optional and can be supported by different settings

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
12
2.2 Wiring the Power Inputs
JetNet 3810(Gf)/3806G accepts 12~24V DC power input and boosts to 48V DC output
for 802.3af standard PoE devices.
JetNet 3710G without power boosting function accepts only 48V DC power Input.
IMPORTANT: Do make sure that different models must connect to the corresponding
supply voltage. Guarantee will not apply to the damage caused by wrong input power.
Note: The product intended to be supplied by LPS power supply.
1. Insert the positive and negative wires of your DC supply into the V+ and V-
contacts of the terminal block connector. The acceptable wire range is 12 to 24 AWG.
JetNet 3810(Gf)/ 3806G

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
13
2. Tighten the terminal screws to prevent the DC wires from coming loose.
2.3 Wiring the Relay Output
JetNet 3810(Gf)/3806G/3710G provide Relay Output. The relay contacts are
energized (open) for normal operation and will close under faulty condition such as
Ethernet port link break. The Relay alarm can be configured by DIP Switches.
JetNet 3710G

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
14
2.4 Wiring Earth Ground
To ensure the system will not be damaged by noise or electric shock, we suggest
making a direct connection between the JetNet 3810(Gf)/3806G/ 3710G and earth
ground to avoid system damage. (Please refer to the upside photo)
1. On the bottom of the JetNet 3810(Gf)/3806G/ 3710G, there is one earth ground
screw.
2. Loosen the earth ground screw with a screwdriver
3. Tighten the screw after the earth ground wire is connected.
2.5 DIP Switches
10-Pin Dip switches are located on the bottom panel of JetNet 3810(Gf)/ 3710G for
configuration purpose (6-Pin for JetNet 3806G). They are used to configure Port
Alarm to corresponding TX ports.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
15
DIP Switch number
Status
Description
DIP 1~2
JetNet 3810(Gf)/3710G/
3806G
On
To enable GbE port break alarm at this port
Off
To disable GbE port break alarm at this port
(Default)
JetNet 3810(Gf)/3710G:
DIP 3~10
JetNet 3806G:
DIP 3~6
On
To enable PoE port break alarm at this port
Off
To disable PoE port break alarm at this port
(Default)
Note: Port break alarm is limited to apply on Auto-negotiation 10/100 Full-duplex
device
DIP Switch number mapping to corresponding PoE port & GbE port as follow:
DIP Switch #
3
4
5
6
7
8
9
10
PoE port
1
2
3
4
5
6
7
8
For JetNet 3810G / 3710G / 3806G:
DIP Switch #
1
2
GbE port
2
1
For JetNet 3810Gf / 3810f:
DIP Switch #
1
2
GbE port
1
2
2.6 Wiring the Ethernet Ports
JetNet 3810(Gf)/ 3806G/ 3710G Industrial Gigabit PoE Switch support 8/4 RJ-45 ports
with automatic MDI/MDI-X crossover, PoE Injector, and automatic 10/100Mbps data
rate sensing for 10Base-T or 100Base-TX connections. Automatic MDI/MDI-X
crossover allows you to connect to other switches, hubs, or workstations, without
regard to using straight-through or crossover cabling. For JetNet 3810G/ 3806G/
3710G model, the switch also provides two 10/100/1000 Base-TX uplinks.
Port 1 to port 8/4 also provides Power over Ethernet function that delivers DC 48V
power through the spare pairs to power the PD.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
16
The following figures depict the schematic diagram of straight-through and crossover
cabling. Note that crossover cables simply cross-connect the transmit lines at each
end to the receive lines at the opposite end.
Straight-through Cabling Schematic Cross-over Cabling Schematic
Note: that Ethernet cables use pins 1, 2, 3, and 6 of an 8-pin RJ45 connector. The
signals of these pins are converted by the automatic MDI-X function, as shown in the
table below:
Pin MDI-X
Signals
MDI Signals
1
RD+
TD+
2
RD-
TD-
3
TD+
RD+
6
TD-
RD-
Connect one side of an Ethernet cable into any switch port and connect the other
side to your attached device. The green LNK LED will light up when the cable is
correctly connected. Refer to the LED Indicators section for descriptions of each LED
indicator. Always make sure that the cables between the switches and attached
devices (e.g. switch, hub, or workstation) are less than 100 meters (328 feet).
2.7 Wiring the Fiber Ports (only JetNet 3810Gf)
JetNet 3810Gf equips 2 gigabit SFP fiber ports. The speed of the SFP port supports up
to 1000Base-SX/LX. The SFP ports accept standard MINI GBIC SFP transceiver. But, to
ensure system reliability, Korenix recommends using the Korenix certificated
Gigabit SFP Transceiver. The certificated SFP transceiver includes 1000Base-SX/LX
single/multi mode ranger from 550m to 80KM. The way to connect the SFP
transceiver is to plug in SFP fiber transceiver fist. Cross-connect the transmit channel
at each end to the receive channel at the opposite end as illustrated in the figure
below.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
17
Note: This is a Class 1 Laser/LED product. Don’t stare at the Laser/LED Beam.
Note: 100Base-FX SFP transceiver is optional and can be supported by different
settings
Note: The unit has to use UL recognized Laser Class 1 SFP transceiver.
2.8 Connecting Powered Device (PD)
Port 1 to port 8/4 provide PoE inject function with maximum 15.4w ability to power
up the powered device use the straight or cross-over Ethernet cable.
The JetNet 3810(Gf)/ 3806G/ 3710G follow the IEEE802.3af Alternative B mode
connector assignment. The following table shows pin assignment of alternative A and
B for the PSE (Power Source Equipment).
Conductor
Alternative A
(MDI-X)
Alternative A
(MDI)
Alternative B
(AII)
1
Rx & Negative Vport
Tx & Positive Vport
2
Rx & Negative Vport
Tx & Positive Vport
3
Tx & Positive Vport
Rx & Negative Vport
4
Positive Vport
5
Positive Vport
6
Tx & Positive Vport
Rx & Negative Vport
7
Negative Vport
8
Negative Vport
PIN Assignment of PSE
Be sure the twisted pair cable is bound with the standard RJ-45 pin, especially the pin
4, 5, 7 and 8.
If the RJ-45 is bound with the wrong pin number, JetNet will not
recognize the PD and won’t forward DC 48V power to PD, since the
JetNet 3810G series switch following the Alternative B mode.
In the IEEE 802.3af standard documents, it indicates the PD should
support mode A and B, and only receiver power from either mode A or mode B.
The following table shows the RJ-45 pin out for the PD.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
18
PD Pinout
Conductor
Mode A
Mode B
1
Positive Vport, Negative Vport
2
Positive Vport, Negative Vport
3
Negative Vport, Positive Vport
4
Positive Vport,
5
Positive Vport,
6
Negative Vport, Positive Vport
7
Negative Vport,
8
Negative Vport,
Note: This product is designed for in building installation only and is not intended
to be connected to exposed (outside plant) networks.
2.9 DIN-Rail Mounting Installation
The DIN-Rail clip is already attached on the rear side of JetNet 3810(Gf)/ 3806G/
3710G. It supports EN 50022 standard DIN Rail, in the following diagram includes the
dimension of EN 55022 DIN Rail for
your reference.
The DIN rail should behind the spring
when install the JetNet 3810G series
onto the standard DIN Rail.
Follow the steps below to mount the
JetNet 3810G series on the DIN-Rail
track.
1. Insert the upper end of the
DIN-Rail clip into the back of
the DIN-Rail track from its
upper side
2. Lightly push the bottom of the
DIN-Rail clip into the track.

Korenix
JetNet 3810(Gf)/ 3806G/ 3710G
19
3. Check if the DIN-Rail clip is tightly attached to the track.
To remove the JetNet 3810G series from the track, reverse the steps above.
3. Appendix
3.1 Product Specification
3.2 Revision History
3.1 Product Specification
Technologies
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-T Fast Ethernet
IEEE 802.3ab 1000Base-T (JetNet 3810G/ 3806G/ 3710G)
IEEE 802.3z Gigabit Ethernet Fiber (only JetNet 3810Gf)
IEEE802.3x Flow Control and Back-pressure
(except JetNet 3810f for 100M fiber)
IEEE 802.3af Power Over Ethernet
IEEE 802.1p Class of Service
Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput
14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet,
1,488,100pps for Gigabit Ethernet
Transfer packet size
64 bytes to 1522 bytes for untag and tagged frames
MAC Address
8k
Packet Buffer
1 Mbits
MTBF
Greater than 20,000 hours @ 25 ℃
Interface
Configuration
802.3af compliant PoE ports x 8 - JetNet 3810(Gf)/ 3710G
x 4 - JetNet 3806G
10/100/1000Base-TX x 2 (JetNet 3810G/ 3806G/ 3710G)
Gigabit/100 Base-FX SFPx 2 (JetNet 3810Gf)
100 Base-FX SFP x 2 (JetNet 3810f)
Auto MDI/MDI-X, Auto Negotiation