Koros Wargames KD-AC-WL-P-001M User manual

© 2020 Koros Wargames LLC
All Rights Reserved
Page 1
Assembly Instructions
Low Stone: Wall Set
P/N: KD-AC-WL-P-001M
Medium Stone: Wall Set
P/N: KD-AC-WL-P-002M

© 2020 Koros Wargames LLC
All Rights Reserved
Page 2
Thank you for purchasing this product. This wall set is versatile and can be used in
any period/genre in your miniature landscapes. This set is the starter set and has
several add-ons that are sold separately. These add-ons being additional wall
(KD-AC-WE-P-001M/002M) and corner sets (KD-AC-CR-P-001M/002M), a column
set (KD-AC-CL-P-001M/002M), and the ironworks topper set (KD-AC-WL-IW-
001M). We hope you enjoy assembling and customizing this model kit and adding
it to your landscape collection.
Skill Level: Beginner
Items Required for Assembly:
-Glue (We use fast drying wood glues, but note that there are many
different glues on the market.)
Optional:
-Several clamps/cloth pins/rubber bands
-Paper towel
-If painting the model, colored spray primer, desired acrylic paint colors,
brushes, and clear flat or matte spray lacquer for under and over coating
finish.
-For painting ideas, please see our website gallery pictures.
Cautions:
-This model contains small parts, keep away from small children.
-All our models are designed for miniature enthusiasts and collectors, they
are not toys.
-For ages 14+
-MDF is a pressed wood material; do not submerge in water as this will
cause damage to the product.
-Avoid excessive moist environments.
Cleaning & Storage:
-Occasionally wipe with a slightly dampened cloth
-Store your building in a cool, dry location.

© 2020 Koros Wargames LLC
All Rights Reserved
Page 3
Pre-assembly:
Organize the model pieces in group and familiarize yourself with their purpose.
Here is a visual aid of all the parts included in your kit to help:
*** If you are painting your model, we recommend that you first apply a
flat/matte clear lacquer, then follow by a spray primer (color of your choice) to all
your pieces prior to assembly. This helps seal the porous surface of the MDF and
will provide a consistent surface to apply your paints.
Tips:
-Wipe off excessive glue
-If you can put a clamp on it or a rubber band to hold parts in place while
glue bonds, do it.
-Do a walkthrough of the assembly without gluing to get familiar with the
way the connections and pieces fit.
The following instructions show pictures of the Medium Stone Wall Set. The
Low Stone Wall Set uses the same steps.
Instructions: Wall Sections (x10)
1
3
4
2

© 2020 Koros Wargames LLC
All Rights Reserved
Page 4
Step 1: Start assembling the walls. Apply glue to the unfinished side of one wall
piece (#2), and press together to the unfinished side of a second wall piece (#3).
Hold together with a clamp if needed. Set aside.
Step 2: Attach wall to base plate (#1) by applying some glue to the bottom of the
wall piece that have the insert tabs. Set aside.
Step 3: Apply glue to the unfinished side of the wall topper piece (#4). Attach the
wall topper to the top of the wall to complete the piece.
Repeat these steps nine times to complete all ten wall pieces.

© 2020 Koros Wargames LLC
All Rights Reserved
Page 5
Instructions: Corners (x4)
Step 1: Start assembling the corner by applying glue to the unfinished side of
piece #1. Next, attach #1 to #2 (glued side to unfinished side) together. Clamp if
necessary. Repeat using pieces #3 and #4.
1
2
3
4
5
6

© 2020 Koros Wargames LLC
All Rights Reserved
Page 6
Step 2: Apply glue to the bottom of the corner walls and the corner joints. Attach
the corner walls to the base plate (#5) and finish by attaching the corner topper
(#6) to the top of the walls.
Repeat these steps three times to complete all four corner pieces.

© 2020 Koros Wargames LLC
All Rights Reserved
Page 7
Instructions: Single Gate (x1)
Step 1: Start assembling the gate by applying glue to the non-finished side of the
wall piece (#1a). *** Take note that wall piece #1a has very small tabs. These
are used to attach the door. Next, attach #1a to #2 (glued side to unfinished
side) together. Clamp if necessary. Apply glue to the bottom of the wall assembly.
1
2
2
3
3
4
4
5
Note the small tabs that are for the door hinges.
1a

© 2020 Koros Wargames LLC
All Rights Reserved
Page 8
Step 2: Attach the wall to the base plate (#3).
Step 3: Apply glue to the unfinished side of the topper (#4). Then attach glued
side of the topper to the top of the assembled wall. Apply glue to the side of the
door (#5) with notches. Attach to the wall side with the hinge tabs. Align the door
as desired (open, closed, partial opened).

© 2020 Koros Wargames LLC
All Rights Reserved
Page 9
Step 4: Repeat steps 1 through 3 with the exception of using part #1 instead of
#1a and that there being no door to be attached in step 3.
Step 5: Your Single gate is complete.

© 2020 Koros Wargames LLC
All Rights Reserved
Page 10
Instructions: Double Gate (x1)
Step 1: Start assembling the gate by applying glue to each non-finished side of the
wall piece (#1). *** Take note that wall pieces #1 have very small tabs. These
are used to attach the doors. Make sure that these tabs are opposite each other
on the inner doorway. Next, attach #1 to #2 (glued side to unfinished side)
together. Clamp if necessary. Apply glue to the bottom of the wall pieces.
1
2
2
1
3
3
4
4
5
5
Note the small tabs that are for the door hinges.

© 2020 Koros Wargames LLC
All Rights Reserved
Page 11
Step 2: Attach the wall to the base plate (#3).
Step 3: Apply glue to the unfinished side of the topper (#4). Then attach glued
side of the topper to the top of the assembled wall. Apply glue to the side of the
door (#5) with notches. Attach to the wall side with the hinge tabs. Align the door
as desired (open, closed, partial opened).

© 2020 Koros Wargames LLC
All Rights Reserved
Page 12
Step 4: Repeat steps 1 through 4 to complete your double gate.
The model kit is complete.