Koso RX2N User manual

wh015ba013
INSTRUCTION
CDI & F I
O
K
S
O

INTRODUCTION
1.The lcd meter is apply for DC 12V.
2.For installation, please follow the steps described in manual. Any
damage caused by wrong installation shall be imputed to the users.
3.Don't break or modify the wire terminal. To avoid the short circuit, please
don't pull the wire when installing.
4.Do not disassemble or change any parts excluding the manual
description.
5.The interior examination or maintenance should be executed by our
professionals.
MARK MEANING:
WARNING!
CAUTION!
You could get theinstallation details from the information behindthe mark.
Some processes must be followed toavoid the affection caused by wronginstallation.
Some processes must be followed toavoid damages to yourself or thepublic.
Some processes must be followed toavoid the damage to the vehicle.
Press the button
one time
Press down the button
for 3 seconds
1-1
Content
Accessory
Thank you for purchasing KOSO RX2N GP style meter , before operating the
unit, please read the instruction thoroughly and retain it for the future
reference.
Notice
Option accessory
1-2
2-1
Installation instructions
2-2
Wiring installation instructions
3-1
3-2
3-3
3-4
Overview
The button function instruction
The screen switch instruction
Auto-checking screen
4-1
5-1
4-2
5-2
The power test screen instruction
4-3
5-3
5-6
5-7
5-8
5-9
5-10
5-11
5-12
5-13
6
4-4
5-4
Speeding warning light setting
5-5
Tire circumference and sensor point setting
The clock setting
The target speed timer / target distance timer setting
The fuel gauge resistance and insufficient fuel warning
setting
6-1
6-2
6-3
7
5
Trouble shooting
The top speed test
Target distance timer test
Target speed timer test
We recommend that you finish the relative setting before operating to
assure the operation of meter.
The RPM shift light setting
Attachment
Attachment
Attachment
Attachment
Meter size
Function, setting instruction
Select button function instruction
Adjust button function instruction
The setting screen instruction
Over heat warning light (Water temperature) setting
Over heat warning light (Oil temperature) setting
RPM input pulse & signal impulse setting
The perpetual calendar setting
The backlight brightness setting
The real odometer record setting
The displayed odometer setting
CDI & FI CDI & FI
CDI & FI

3-1
Off
Check 1
Check 2
Check 3
On
100.7 mm
Auto-checking screen
It will enter the setting screen automatically when the first time you start it.
11 mm
52 mm
Check 4
Check 5
Check 6
Check 7
Check 8
3-2
26.5 mm 32.5 mm 38.42 mm
135.7 mm
26.5 mm23.2 mm
Meter size
CDI & FI CDI & FI

3-3
Fuel meter
Display range: 10 levels.
Setting range: 100 Ù, 510 Ù, fuel
switch, no display.
Fuel warning
Setting range: 10~50 %
Setting unit: 10 %
>Regarding the setting, please check 5-8.
Level thermometer
(Water & oil temperature)
oo
Display range: 20~120 C (68~248 F),
10 levels.
Display unit: Each level represents
oo
10 C (50 F)
Tachometer (10,000 RPM)
Display range: 0~10,000 RPM.
Display unit: 250 RPM.
Tachometer (20,000 RPM)
Display range: 0~20,000 RPM.
Display unit: 500 RPM.
Speedometer
Display range: 0~360
km/h (0~225 MPH)
Display unit: km/h &
MPH for alternative.
>Regarding the setting,
please check 4-4.
Odo meter
Display range:
0~99999.9 km (mile)
Display unit: 0.1 km (mile).
Trip meter A.B
Display range: 0~999.9 km
(mile)
Display unit: 0.1 km (mile).
, reset
automatically after 99999.9 km.
, reset automatically after
999.9 km.
Indicators lights
Turn signal light (Green)
Neutral light (Green)
High beam light (Blue)
EOBD light (Amber)
Engine oil pressure light (Red)
Speeding warning light
Setting range: 30~360 km/h
(20~225 MPH).
Setting unit: 1 km/h (MPH).
>Regarding the setting,
please check 5-1.
O
(Water & oil temperature)
Setting range: 6
o
(140~482 F) o
Setting unit: ( F)
>Regarding the setting, please
check 5-3.5-4.
ver heat warning light
o
0~250 C
.o
1C .
Clock
24H
Digital
(Water & oil temperature)
o
Display range: 0~250 C
o
(32~482 F) oo
Display unit: 0.1 C ( F)
thermometer
The max RPM recall indicator light
The indicator light will move
according to the current RPM.
The max RPM indicator light will
show you the max RPM you reach
and light on for 3 seconds.
Tachometer (10,000 RPM)
Display unit: 250 RPM.
Tachometer (20,000 RPM)
Display unit: 500 RPM.
The RPM shift light (10,000 RPM)
Setting range: 1,000~10,000 RPM.
Setting unit: 100 RPM.
The RPM shift light (20,000 RPM)
Setting range: 1,000~20,000 RPM.
Setting unit: 100 RPM.
-500 RPM OVER-RPM
Overview
Pre-Shift light
Setting range: -500~-3,000 RPM
before the shift light.
Setting unit: 100 RPM.
>Regarding the setting, please
check 5-2.
Max. record
The meter will record
the top speed, RPM
and temperature
automatically.
CDI & FI CDI & FI

Display internal
Trip meter A/B
Odometer
Top speed record
<0.5 second
Function, setting instruction
o
-10~+60 C
Effective voltage
Indicator light color
DC 12 V
Effective temperature range
Meter standard
Meter size
Meter weight
JIS D 0203S2
135.7 X 100.7X 52 mm
Around 240 g
Setting range: 30~360 km/h (20~225 MPH)
Target speed timer
Top speed timer
Target distance timer Setting range: 1/32~20/32 mile (50~1,000 M)
Setting unit: 1/32 mile (50 M)
uel warningInsufficient f
24 H
Setting range: 2,000~2,099 A. D
Clock
Perpetual calendar
Neutral-green, High beam-blue,
The record including,
Design and specification are subject to change without notice!
Display range: 0~10,000 / 20,000 RPM
Tachometer
Max. RPM record
RPM input pulse
<0.5 second
oo
Display range: 0~250 C (32~482 F)
Display internal
Top temperature record oo
Display range: 0~250 C (32~482 F)
Display range: 0~360 km/h (0~225 MPH)
Display range: 0~360 km/h (0~225 MPH)
Speedometer
Display unit: km/h & MPH for alternative
Display range: 0~99999.9 km (mile),
Display range: 0~999.9 km (mile),
Setting range: 30~360 km/h (20~225 MPH)
Speeding warning light
Setting unit: 1 km/h (MPH)
Setting unit: 1 mm Sensitive point: 1~60 Points
Tire circumference Setting range: 300~2,500 mm
Display range: 0~10,000 / 20,000 RPM
Display unit: 250 / 500 RPM
Setting range: 1,000~10,000 / 20,000 RPM
Setting range: 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6.
Setting unit: 100 RPM
Thermometer oo
Display unit: C & F for alternative
Display range: 10 levels
Display unit: Each level represents 10 %
Fuel meter
Setting unit: 10 %
Setting range: 10~50 %
Setting unit: 5 km/h (MPH)
1.Speed: 0~360 km/h (0~225 MPH)
2.Distance: 0~999 M (0~3,280 feet)
3.RPM: 0~10,000 / 20,000 RPM
4.Timer: 0~9'59"99 second.
Turn signal-green, EOBD-amber, Oil-red,
Speeding-red, RPM shift light yellow / red.
reset automatically after 99999.9 km (mile).
reset automatically after 999.9 km (mile)
Shift light
Digital thermometer
oo
Display unit: 0.1 C ( F)
(Water & oil temperature)
oo
Display range: 20~120 C (68~248 F), 10 levels
Level thermometer
oo
Display unit: Each level represents 10 C (50 F)
Display internal <0.5 second
oo
Setting range: 60~250 C (140~482 F)
Over heat warning light
(Water & oil temperature) oo
Setting unit: 1 C ( F)
Setting range: 100 Ù, 510 Ù, fuel switch, no display
3-4
Setting range: -500~-3,000 RPM before the
Setting unit: 100 RPM
Pre-shift light
shift light
(Water & oil temperature)
CDI & FI CDI & FI

4-2
4-1
Select button
Select & Adjust X 3 seconds
Select button X 3 seconds
Adjust button
Adjust button X 3 seconds
The button function instruction
1.In main screen, press the Select button to choose the display of clock,
water temperature or oil temperature.
2.In power test screen, press the Select button to choose the function you
want to use.
3.In setting screen, press the Select button to choose the function you want
to set.
1.When the temperature Is In the main screen, you could
press down the "Select" button for 3 seconds to switch
the temperature unit.
2.In power test screen, press down the Select
button for 3 seconds to back to the main screen.
3.In setting screen, press down the Select button
for 3 seconds to back to the main screen.
In main screen, press down the Adjust button for 3 seconds to reset the trip
A, trip B, or the Max. Record.
In main screen, press down the Select & Adjust
buttons at the same time for 3 seconds to enter
the setting screen.
CAUTION!
The screen switch instruction
In the setting screen, press down the Select
button for 3 seconds to back to the main screen.
In main screen, press down the Select & Adjust
button at the same time for 3 seconds to enter
the setting screen.
In main screen, press the Select & Adjust button
one time to enter the power test screen.
In power test screen, press down the Select
button for 3 seconds to back to the main screen.
In any screen, you could press down the Select
buttons for 3 seconds to back to the main screen.
Press down the Adjust button
In setting screen, to add the setting value fast.
For safety reason - you could adjust the setting or operate
the function only when the bike is stop.
1.In main screen, press the Adjust button to choose the display of odometer,
trip A, trip B or the Max. record.
2.In power test screen, press the Adjust button to reset the record, stop the
testing, or restart the test.
3.In setting screen, press the Adjust button to make the setting. If you keep
pressing down the Adjust button the setting number will increase fast.
Select &
Adjust
X3 S
Select
X3 S
Select &
Adjust
one time
Select
X3 S
CDI & FI CDI & FI

4-4
In main screen, press the Select button to choose
the function combination you want to display on
the screen.
The alternative combination is as the circle we list:
clock+fuel gauge water temperature+fuel
gauge water temperature+oil temperature
level gauge oil temperature+water
temperature level gauge clock+fuel gauge.
Select button function instruction Adjust button function instruction
If you don't install the fuel wiring, the
fuel gauge will not display.
4-3
Press down the Adjust button for 3 seconds
to reset the Max.record.
In ODO function, press the Adjust button one
time to switch to the trip A function.
In trip A screen, press the Adjust button one
time to switch to the trip B function.
In trip B screen, press the Adjust button one
time to switch to the Max.record function.
In Max. record screen, press the Adjust button
one time to switch to the ODO function.
When the temperature Is In the main screen,
you could press down the "Select" button for 3
seconds to switch the temperature unit.
Press down the Adjust button for 3 seconds
to reset the trip A.
Press down the Adjust button for 3 seconds
to reset the trip B.
Press the Select button one time to check the
oil temperature record.
CDI & FI CDI & FI

The setting screen instruction
If you enter the setting screen for 30 seconds and don't press the
button, it will back to the main screen automatically.
In main screen, press down the Select & Adjust
button at the same time for 3 seconds to enter
the setting screen.
The setting screen is in order as the following
drawing, please use the setting order for your
reference when you want to set the meter.
5
Speeding warning light setting
The RPM shift light setting Over heat warning light
(Water temperature) setting
Over heat warning light
(Oil temperature) setting
The target speed timer / target
distance timer setting
Tire circumference and sensor
point setting
RPM input pulse & signal impulse
setting
The fuel gauge resistance and
insufficient fuel warning setting
The clock setting
The perpetual calendar settingThe backlight brightness settingThe real odometer record setting
The displayed odometer setting
Adjust button
CDI & FI CDI & FI

P.S.P.S.
5-1 Speeding warning light setting
In a 1 screen, press the Select button to enter
the speeding warning light setting screen.
EX. Now the speeding warning light setting is
60 km/h.
EX. The speeding warning light you want to
set is 65 km/h.
Press the Select button to move to the digit
you want to set.
The speeding light will
light on when the speed reaches
your speeding warning setting.
The speeding warning light setting
range: 30~360km/h (20~225 MPH).
Setting unit: 1 km/h (MPH).
Press the Adjust button to choose the setting
value.
Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 1 setting
screen.
EX. Now the setting is changed from 60 km/h
to 65 km/h.
Now the speeding warning light and the
setting value is flashing!
When you leave this screen, the setting
is finished.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
The setting unit will change together with the
unit setting (4-4).
Next page
CDI & FI CDI & FI

P.S.P.S.
The yellow color pre-shift light
will light on according to the
shift light setting number.
P.S.P.S.
5-2 The RPM shift light setting
Now the pre-light and the setting number is
flashing!
Now the shift light and the setting value is
flashing!
The red color shift light will
light on according to the
shift light setting number.
In a 2 screen, press the Select button to enter
the RPM shift light setting screen.
EX. Now the RPM shift light setting is 7,000 RPM.
EX. The you want to set is
.
RPM shift light
12,000 RPM
Press the Adjust button to choose the setting
value.
Press the Select button to enter the pre-shift
light setting.
EX. Now the s setting is changed
from 7,000 RPM to 12,000 RPM.
hift light
EX.
The equation is as following,
The shift light setting value (12,000 RPM) - The
pre-shift light setting value, (X)= 10,500 (The
RPM you want the pre-shift light to light on.)
The setting value of pre-shift light= 1,500.
It means that you should set the pre-shift light
setting as 1,500.
You want the pre-shift light to light on at
10,500 RPM
Press the Adjust button to choose the setting
value.
The setting range: -500~-3,000 RPM.
Setting unit: 100 RPM.
The setting range: 1,000~10,000 /
20,000 RPM.
Setting unit: 100 RPM.
Next pageNext page
Press the Select button to return to a 2 setting
screen.
EX. Now The pre-shift light setting is changed
from 500 RPM to 1,500 RPM.
When you leave this screen, the setting
is finished.
CDI & FI CDI & FI

5-2 The RPM shift light setting
Press the Adjust button to select the other
setting screens.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
5-3 Over heat warning light (Water temperature) setting
P.S.P.S.
The over heat warning light
(Water temperature) will flash
when the temperature reached
your setting.
In a 3 screen, press the Select button to enter
the over heat warning light (Water temperature)
setting screen.
EX. Now the over heat warning light (Water
temperature) setting is 10 .
o
0.0 C
Now the water temperature logo and the
setting value are flashing!
The over heat warning light setting
range: 60~
Setting unit:
oo
250 C ( F).
140~482
oo
1C(F).
The setting unit will change together with the
unit setting (4-4).
EX. You want to set the over-heat warning
o
light (Water temperature) at 102.0 C.
Press the Select button to move to the digit
you want to set.
Press the Adjust button to choose the setting
value.
Next page
CDI & FI CDI & FI

Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 3 setting
screen.
EX. Now the setting is changed from 10
to 102 .
o
0.0 C
o
.0 C
When you leave this screen, the setting
is finished.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
5-3 Over heat warning light (Water temperature) setting 5-4 Over heat warning light (Oil temperature) setting
P.S.P.S.
The over heat warning light
(Oil temperature) will flash
when the temperature reached
your setting.
In a 4 screen, press the Select button to enter
the over heat warning light (Oil temperature)
setting screen.
EX. Now the over heat warning light (Oil
temperature) setting is 10 .
o
0.0 C
Now the water temperature logo and the
setting value are flashing!
The over heat warning light setting
range: 60~
Setting unit:
oo
250 C ( F).
140~482
oo
1C(F).
EX. You want to set the over-heat warning
o
light (Oil temperature) at 102.0 C.
Press the Select button to move to the digit
you want to set.
Press the Adjust button to choose the setting
value.
The setting unit will change together with the
unit setting (4-4).
Next page
CDI & FI CDI & FI

Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 4 setting
screen.
EX. Now the setting is changed from 10
to 102 .
o
0.0 C
o
.0 C
When you leave this screen, the setting
is finished.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
5-4 Over heat warning light (Oil temperature) setting The target speed timer / target distance timer setting
Now the target speed value is flashing!
The target speed timer setting range:
30~360 km/h (20~225 MPH).
Setting unit: 5 km/h (MPH).
Next page
In a 5 screen, press the Select button to enter
the target speed timer and target distance
timer setting screen.
EX. Now the target speed timer setting is 0~50
km/h and the target distance timer setting is
1/32 mile (50 M).
Press the Select button to enter the target
distance timer setting screen.
EX. Now the target speed timer is changed
from 0~50 km/h to 0~110 km/h.
EX. You want to set the target speed timer
setting at 0~110 km/h.
Press the Adjust button to choose the setting
value.
EX. You want to set the target distance timer
setting at 2/32 mile (100 M).
Press the Adjust button to choose the setting
value.
5-5
CDI & FI CDI & FI

Now the target distance value is flashing!
The target distance timer setting range:
1/32~20/32 mile (50~1,000 M).
Setting unit: 1/32 mile (50 M).
Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 5 setting
screen.
EX. Now the target distance timer setting is
changed from 1/32 mile (50 M) to 2/32 mile
(100 M).
When you leave this screen, the setting
is finished.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
The target speed timer / target distance timer setting
5-5 5-6 Tire circumference and sensor point setting
CAUTION!
Please measure the tire circumference.
The speed displayed on the meter will be
affected by the setting, please make sure the
setting number is correct before you make
the setting.
In a 6 screen, press the Select button to enter
the tire circumference and sensor point setting
screen.
EX. Now the tire circumference setting is 1,000
mm, and the sensor point is 1.
EX. You want to set the circumference at
1,300 mm.
Press the Select button to move to the digit
you want to set.
Now the setting value is flashing!
The tire circumference setting range:
300~2,500 mm.
Setting unit: 1 mm.
130 cm
P.S.P.S.
You could define the valve as
the starting point and the
terminal point to measure the
wheel circumference with a
measuring tape.
Next page
CDI & FI CDI & FI

EX. The sensor point you want to set is 6.
Press the Select button to move to the digit
you want to set.
Press the Adjust button to choose the setting
value.
Press the Select button to enter the sensor
point setting screen.
EX. Now the circumference setting is changed
from 1,000 mm to 1,300 mm.
Now the sensor point setting value is flashing!
The sensor point setting range: 1~60
points.
Next page
Press the Adjust button to choose the setting
value.
5-6 Tire circumference and sensor point setting
Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 6 setting
screen.
EX. Now the sensor point setting is changed
from 1 to 6.
When you leave this screen, the setting
is finished.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
CDI & FI CDI & FI

5-7
The RPM input pulse setting range is :
0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6.
In a 7 screen, press the Select button to enter
the RPM input pulse setting screen.
EX. Now the RPM input pulse setting is 1 (4 Stroke,
2 piston) and the signal impulse setting is Hi
(The positive impulse).
EX. You want to set the RPM input pulse at 2
(4 Stroke, 4 piston) .
Press the Adjust button to choose the setting
value.
EX. The signal impulse you want to set is Lo
(The negative impulse) .
Press the Adjust button to choose the setting
value.
The corresponding
stroke and pistons number.
The corresponding RPM signal
number per ignition.
2 RPM signals per 1 ignition.
2 RPM signals per 3 ignition.
2 RPM signals per 5 ignition.
2 RPM signals per 10 ignition.
1 RPM signal per 1 ignition.
1 RPM signal per 2 ignition.
1 RPM signal per 3 ignition.
1 RPM signal per 4 ignition.
1 RPM signal per 6 ignition.
The setting
value
0.5
1
1.5
2
3
2.5
4
5
6
2C-1P
2C-2P
2C-3P
2C-4P
2C-6P
4C-1P
4C-4P
4C-6P
4C-5P
4C-8P
4C-10P
4C-12P
4C-2P
4C-3P
Most of the 4-cycle bikes with
one single piston are igniting every 360 degree
once, so the setting should be the same as the
bike with 2-cycle and one piston engine.
CAUTION!
Press the Select button to enter the signal
impulse setting screen.
EX. Now the RPM input pulse setting is changed
from 1 (4 Stroke, 2 piston) to 2 (4 Stroke,
4 piston).
If the tachometer can't detect the
signal (No RPM is displayed on the
screen), you could choose another
setting, and check it again.
The impulse setting range is between Hi
(The positive impulse) & Lo (The
negative impulse).
Press the Select button to return to a 7 setting
screen.
EX. Now the signal impulse setting is
changed from Hi P to Lo.
When you leave this screen, the setting
is finished.
Now the setting number is flashing!
Next page
RPM input pulse & signal impulse setting
Press the Adjust button to select the other
setting screens.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
CDI & FI CDI & FI

5-8 The fuel gauge resistance and insufficient fuel warning setting
Now the resistance setting value is flashing!
The fuel gauge resistance setting range
: 100 Ù, 510 Ù, fuel switch.
The switch setting is for the fuel switch
only, can't be used for the fuel level
sensor.
If you don't install the fuel wiring, the
fuel gauge will not display.
In a 8 screen, press the Select button to enter
the fuel gauge resistance and insufficient fuel
warning setting screen.
EX. Now the fuel gauge resistance setting is
100 Ùand the insufficient fuel warning setting
is 30 %.
EX.
0
You want to change the fuel resistance
setting to 51 .
Press the Adjust button to choose the setting
value.
Ù
P.S.P.S.
Usually the fuel gauge resistance is 100 on YAMAHA
system, and 510 on HONDA system.
The insufficient fuel warning setting: When the fuel is
less than your setting, the fuel level gauge will flash to
warn you.
Ù
Ù
Press the Select button to enter the insufficient
fuel warning setting screen.
EX. Now the fuel gauge setting is changed from
100 to 510 .ÙÙ
EX. You want to set the insufficient fuel
warning setting at 20 %.
Press the Adjust button to choose the setting
value.
Now the insufficient setting value is flashing!
The insufficient fuel warning setting
range: 10~50 %. Setting unit: 10 %.
Press the Select button to return to a 8 setting
screen.
EX. Now the setting is changed from 30 % to
20 %.
When you leave this screen, the setting
is finished.
Press the Adjust button to select the other
setting screens.
Next page
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
CDI & FI CDI & FI

5-9 The clock setting
In a 9 screen, press the Select button to enter
the clock setting screen.
EX. Now the time is 0:00.
EX. You want to set the clock at 12:05.
Press the Adjust button to choose the setting
value.
Now the hour value is flashing!
This is a 24 H clock.
Press the Select button to enter the minute
setting screen.
EX. Now the hour is changed from 0 to 12.
Press the Adjust button to choose the setting
value.
Now the minute value is flashing!
Press the Select button to return to a 9 setting
screen.
EX. Now the setting is changed from 0 to 5.
When you leave this screen, the setting
is finished.
Press the Adjust button to select the other
setting screens.
Next page
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
CDI & FI CDI & FI

5-10
In a 10 screen, press the Select button to enter
the perpetual calendar setting screen.
EX. Now the perpetual calendar setting is
2000/01/01 Saturday.
Press the Select button to enter the year
setting screen.
Press the Select button to enter the month
setting screen.
EX. Now the year setting is changed from 2000
to 2009.
EX. You want to set the perpetual calendar
at 2009/07/17.
Press the Adjust button to choose the setting
value.
Press the Adjust button to choose the setting
value.
Press the Adjust button to choose the setting
value.
Now the setting value is flashing!
Now the setting value is flashing!
Now the setting value is flashing!
The year setting range : 2000~2099.
Next page Next page
The perpetual calendar setting
If you choose to turn off the calendar
function, press the Select button to
return to a 10 screen.
Then you could press the Adjust button
to select other setting screens.
When you adjust the year and date, the
day will adjust automatically.
The month setting range: 1~12.
When you adjust the year and date, the
day will adjust automatically.
Press the Select button to enter the date
setting screen.
EX. Now the month setting is changed from 1
to 7.
CDI & FI CDI & FI

Press the Adjust button to choose the setting
value.
Now the setting value is flashing!
Press the Select button to return to a 10
setting screen.
EX. Now the setting is changed from 01 to 17.
When you leave this screen, the setting
is finished.
Press the Adjust button to select the other
setting screens.
5-10
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
The perpetual calendar setting
The date setting range 1~31.
When you adjust the year and date, the
day will adjust automatically.
5-11
In a 11 screen, press the Select button to enter
the backlight brightness setting screen.
EX. Now the backlight brightness is 5 (The
brightest setting).
EX. You want to set the brightness at 3.
Press the Adjust button to choose the setting
value.
Now the setting value is flashing!
Press the Select button to return to a 11 setting
screen.
EX. Now the setting is changed from 5 to 3.
When you leave this screen, the setting
is finished.
Press the Adjust button to select the other
setting screens.
If you just want to makethis function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
The backlight brightness setting range
1~5.
The brightness adjust setting is only
effective in the LCD brightness.
The backlight brightness setting
CDI & FI CDI & FI