
Booster meter
-10~+60oC
。Power required AC/DC 12V
。Unit body using temperature range
。Unit body specification
。Unit body dimension
。Unit body weight
JIS D 0203 (S2)
85g approximately
W99.6 X L42 X H22.5mm
3-1
2-1
W99.6 X L42 X H22.5mm
。Boost Pressure digital display
。Boost Pressure scale
Description of basic functions
3-2
22.5mm
42mm
99.6mm
Display range:0~30PSI, will blink to warn at
overrange.
Display unit: 0.5 PSI
2-2
1.
2.
3. 4.
5.
6.
7.
8.
9.
1.LCD meter (Accessory 1)
2.METER BRACKET (Accessory 4)
3.M5 gasket X 2 (Accessory 10)
4. M5 X 18L screw X 2 (Accessory 8)
5. M4 X 12L screw X 2 (Accessory 9)
6.M4 gasket X 2 (Accessory 11)
7.Rubber (Accessory 5)
8.Rubber (Accessory 6)
9.Steel gasket(Accessory 7)
Booster meter
Boost Pressure scale (15PSI)
。Display range: 0~15PSI
。Display unit: 0.5 PSI
Boost Pressure scale (30PSI)
。Display range: 0~30PSI display range
。Display unit: 1 PSI
Booster meter
Boost Pressure digital display
。Display range:0~30PSI, will blink to warn
at overrange.
。Display unit: 0.5 PSI
Description of basic functions
Display range:0~15PSI Display unit:0.5 PSI
Display range:0~30PSI Display unit:1 PSI
Wiring installation instructions
Black/ground wire connect to
the vehicle body or the engine
(it must be a good ground)
EXTENSION WIRE (ACCESSORY 3) BOOST SENSOR (ACCESSORY 2)
Red / Postive pole (Connect to the battery DC 12V)
Meter (Accessory 1)
When installing,please follow the steps below.
Installation instructions
Design and specifications are subject to change without notice!
Adjust
Select