Kramer TOOLS VP-210XL User manual

Kramer Electronics, Ltd.
USER MANUAL



Model:
VP-210xl
XGA Line Amplifier

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 1
3 Overview 3
4 Your VP-210XL XGA Line Amplifier 4
5 Connecting the VP-210XL XGA Line Amplifier 6
6 Technical Specifications 8
Figures
Figure 1: VP-210XL XGA Line Amplifier 4
Figure 2: VP-210XL XGA Line Amplifier (Underside) 5
Figure 3: Connecting the VP-210XL XGA Line Amplifier 7
Tables
Table 1: VP-210XL XGA Line Amplifier Features 4
Table 2: VP-210XL XGA Line Amplifier (Underside) Features 5
Table 3: Technical Specifications of the VP-210XL XGA Line Amplifier 8

Introduction
1
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video,
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
500-plus different models now appear in 8 Groups
1
, which are clearly defined
by function. Congratulations on purchasing your Kramer TOOLS VP-210 XL
XGA Line Amplifier, which is ideal for:
Dual monitor systems, local or remote
Presentation systems for remote transmission and cable equalization
The package includes the following items:
VP-210 XL XGA Line Amplifier
Power adapter (12V DC input) and this user manual
2
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables
3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2

Overview
3
3 Overview
The high performance VP-210 XL is a line amplifier for XGA
1
computer
graphics signals that provides controls to compensate for signal losses
inherent in long cable runs.
In particular, the VP-210 XL XGA Line Amplifier:
Features a video bandwidth of 380MHz, ensuring that it remains
transparent for all resolutions
Is HDTV compatible
Includes separate controls for output level and cable equalization, ID Bit
control, and independent input signal termination for red, green and blue
Has a looping input
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your VP-210 XL away from moisture, excessive sunlight and
dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
2
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to UXGA
2 For example: model number AD2512C, part number 2535-000251

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-210xl XGA Line Amplifier
4
4 Your VP-210 XL XGA Line Amplifier
Figure 1 and Table 1 define the VP-210 XL :
Figure 1: VP-210XL XGA Line Amplifier
Table 1: VP-210XL XGA Line Amplifier Features
# Feature Function
1 LOOP HD15F Connector Connect to a local display
2 INPUT HD15F Connector Connect to the computer graphics source
3 OUTPUT HD15F Connector Connect to the computer graphics acceptor
4 LEVEL Control knob Adjusts the video signal level
5 EQ. Control knob Adjusts the video EQ. (equalization) compensation
6 ON LED Illuminates when receiving power
7 12V DC +12V DC connector for powering the unit

Your VP-210xl XGA Line Amplifier
5
Figure 2 and Table 2 define the underside of the VP-210 XL :
Figure 2: VP-210XL XGA Line Amplifier (Underside)
Table 2: VP-210XL XGA Line Amplifier (Underside) Features
# Feature Function
1 ID Bit Switch Slide up to set to ON
1
; down to set to OFF
2 BLUE
GREEN
75 
TERM /
Hi-Z
Switches RED
Slide up to set to 75TERM (when a local monitor
is not used); down to set to Hi-Z (when a local
monitor is connected
2
)
1 The default. Enabling the notebook or laptop to output a VGA signal to an external VGA monitor
2 To the LOOP HD15F connector

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-210xl XGA Line Amplifier
6
5 Connecting the VP-210 XL XGA Line Amplifier
To connect your VP-210 XL XGA Line Amplifier, as the example in Figure 3
illustrates, do the following
1
:
1. Connect a computer graphics source (for example, a computer) to the
INPUT HD15F connector.
2. Connect the OUTPUT HD15F connector to an acceptor (for example, a
projector).
3. Connect the LOOP HD15F connector to an acceptor (for example, a local
display).
4. Connect the 12V DC power adapter to the 12V DC socket and connect
the transformer to the mains electricity (not illustrated in Figure 3).
5. If required, adjust the video output signal level and/or cable compensation
equalization level, and/or set the:
Red, green and blue signal termination switches on the underside
ID Bit switch to ON
1 Switch OFF the power on each device before connecting it to your VP-210 XL . After powering up your VP-210 XL , switch on
the power on each device

Connecting the VP-210xl XGA Line Amplifier
7
Figure 3: Connecting the VP-210XL XGA Line Amplifier

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
8
6 Technical Specifications
Table 3 includes the technical specifications:
Table 3: Technical Specifications
1
of the VP-210XL XGA Line Amplifier
INPUT: 1 XGA on an HD15F connector
OUTPUT: 1 XGA on an HD15F connector
1 LOOP XGA on an HD15F connector
VIDEO BANDWIDTH (-3dB): 380MHz
DIFF. GAIN: 0.05%
DIFF. PHASE: 0.03°
VIDEO S/N RATIO: 74.8dB
K-FACTOR: 0.05%
CONTROLS: Level: 0 to +6dB, EQ.: 0 to +8dB @ 50MHz
POWER SOURCE: 12VDC, 60mA
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H
WEIGHT: 0.25kg. (0.55lbs) approx.
ACCESSORIES: Power supply, mounting brackets
OPTIONS: 19" rack adapters
1 Specifications are subject to change without notice

9
LIMITED WARRANTY
WHO IS PROTECTED?
WHAT IS COVERED AND WHAT IS NOT COVERED
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
HOW YOU CAN GET WARRANTY SERVICE
LIMITATION OF IMPLIED WARRAN TIES
EXCLUSION OF DAMAGES
CAUTION!
Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the
following terms.
Kramer
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
Only the first purchase customer may enforce this warranty.
We will pay labor and material expenses for covered items. We will not pay for the following:
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not be liable for:
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC);
generic emission standard.
Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercial and light industry environment".
CFR-47: FCC Rules and Regulations:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product,on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction resulting from:
i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repair or attempted repair by anyone not authorized by Kramer
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or installation of the product
vi) Any other cause, which does not relate to a product defect
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
1. Removal or installationscharges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
NOTE:
Part 1:

Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: [email protected]
P/N: 2900-001020 REV 3
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Caution
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.