Kramer VP-2L User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-2L
UXGA Line Amplifier
P/N: 2900-000239 Rev 3

VP-2L – Contents i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
3Overview 3
3.1 Defining the VP-2L UXGA Line Amplifier 4
4Connecting the VP-2L 5
5Technical Specifications 7
Figures
Figure 1: VP-2L UXGA Line Amplifier 4
Figure 2: Connecting the VP-2L 6

VP-2L - Introduction 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and
GROUP 11: Sierra Products.
Congratulations on purchasing your Kramer VP-2L UXGA Line Amplifier, which is
ideal for the following typical applications:
•Conference room presentations and advertising applications
•Rental and staging

2 VP-2L - Getting Started
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•Review the contents of this user manual
Use Kramer high performance high resolution cables
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
Caution: No operator serviceable parts inside the unit
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning: Disconnect the power and unplug the unit from the
wall before installing
2.1 Achieving the Best Performance
To achieve the best performance:
•Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
•Position your Kramer VP-2L away from moisture, excessive sunlight and
dust
i
!

VP-2L - Overview 3
3 Overview
The Kramer VP-2L is a high performance line amplifier for computer graphics
video signals (up to UXGA) and HD signals. It accepts an input on a 15-pin HD
connector and provides a buffered output, also on a 15-pin HD connector.
In particular, the VP-2L UXGA Line Amplifier features:
•Resolution of up to UXGA, ensuring that it remains transparent even in the
most critical applications
•Trimmers for output level and cable equalization
•An ID Bit control switch
•A LED power indicator
•A small enclosure housing
•A 5V DC power supply

4 VP-2L - Overview
3.1 Defining the VP-2L UXGA Line Amplifier
This section defines the VP-2L.
Figure 1: VP-2L UXGA Line Amplifier
# Feature Function
1 LEVEL Control Trimmer Adjusts the video signal level
Use a screwdriver to rotate the trimmer, adjusting the
appropriate level
2 EQ. Control Trimmer Adjusts the video EQ. (equalization) compensation
3 OUTPUT 15-pin HD Connector Connect to the computer graphics acceptor
4 ON LED Illuminates when receiving power
5 INPUT 15-pin HD Connector Connect to the computer graphics source
6 5V DC +5V DC connector for powering the unit
7 ID Bit Switch Slide to the right to set to ON; to the left to set to
OFF
ON is the default that enables the notebook or laptop to
output a VGA signal to an external VGA monitor

VP-2L - Connecting the VP-2L 5
4 Connecting the VP-2L
Always switch off the power to each device before connecting it to your
VP-2L. After connecting your VP-2L, connect its power and then
switch on the power to each device.
To connect your VP-2L UXGA Line Amplifier, as the example in Figure 2 illustrates,
do the following:
1. Connect a computer graphics source to the INPUT 15-pin HD connector.
2. Connect the OUTPUT 15-pin HD connector to an acceptor (for example, a
display).
3. Connect the 5V DC power adapter to the 5V DC socket and connect the
transformer to the mains electricity or use the included USB cable to power
the unit as described below.
4. If required, adjust the video output signal level and/or cable compensation
equalization level.
Use a screwdriver to rotate the trimmers to adjust the appropriate level.
The VP-2L is supplied with the USB cable that:
•Has a USB-A connector at one end and a 5V DC jack at the other
•Connects to any USB port to power the unit
The internal Kramer P/N for this USB cable is 2518-0214003 C-UAM/DC35(THREAD)-3
To connect the VP-2L UXGA Line Amplifier using this cable:
1. Connect the 5V DC jack of the cable to the 5V DC socket of the VP-2L
(instead of using the 5V DC power adapter) and connect the USB-A
connector of the cable to the USB port of the display or computer.
The VP-2L receives power from the display or computer without needing a
power supply.
i

6 VP-2L - Connecting the VP-2L
Figure 2: Connecting the VP-2L

VP-2L - Technical Specifications 7
5 Technical Specifications
INPUT: 1 UXGA on a 15-pin HD connector
OUTPUT: 1 UXGA on a 15-pin HD connector
MAX. OUTPUT LEVEL: 1.5Vpp
RESOLUTION: Up to UXGA
DIFF. GAIN: 2.7%
DIFF. PHASE: 0.09°
K-FACTOR: 0.1%
S/N RATIO: 73dB
CONTROLS: Level: –7.4dB to +4dB; EQ.: 0 to +26.4dB
COUPLING: DC
POWER SOURCE: 5V DC, 307mA
DIMENSIONS: 4.27cm x 5.64cm x 2.2cm (1.68" x 2.22" x 0.87") W, D, H.
WEIGHT: 0.14kg (0.31lbs) approx.
ACCESSORIES: Power supply, C-GM/GM-3 molded 15-pin HD to 15-pin HD
cable, USB cable (internal Kramer P/N: 2518-0214003
C-UAM/DC35(THREAD)-3)
Specifications are subject to change without notice at http://www.kramerelectronics.com