Kramer VM-114H2C User manual

Kramer Electronics, Ltd.
USER MANUAL
Model:
VM-114H2C
2 Input 1:4 HDMI DA/2x CAT5 Outputs

Contents
i
Contents
1Introduction 1
2Getting Started 1
2.1 Quick Start 2
3Overview 3
3.1 About HDMI 4
3.2 Using Shielded Twisted Pair Cable 4
3.3 About the Power Connect™ Feature 5
3.4 Defining EDID 5
3.5 Recommendations for Best Performance 5
4Defining the VM-114H2C 6
5Using the VM-114H2C 8
5.1 Connecting the VM-114H2C 8
5.2 Acquiring the EDID 9
5.2.1 Disabling/Enabling Deep Color Support 10
5.3 Connecting to the VM-114H2C via RS-232 10
5.4 RS-232 and IR Control and Pass-through 10
5.4.1 RS-232 Control and Pass-through Using the VM-114H2C 11
5.4.2 Local IR Control and IR Pass-through Using the VM-114H2C 11
6Wiring the Twisted Pair RJ-45 Connectors 15
7Technical Specifications 16
8Default Communication Parameters 16
9Default EDID 17
10 Kramer Protocol 2000 18
Figures
Figure 1: VM-114H2C Front Panel 6
Figure 2: VM-114H2C Rear Panel 7
Figure 3: Connecting the VM-114H2C 8
Figure 4: VM-114H2C RS-232 Control and Pass-through 11
Figure 5: VM-114H2C IR Control and Pass-through Example One 12
Figure 6: VM-114H2C IR Control and Pass-through Example Two 13
Figure 7: VM-114H2C IR Control and Pass-through Example Three 14
Figure 8: CAT 5 Pinout 15

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
Tables
Table 1: VM-114H2C Front Panel Features 6
Table 2: VM-114H2C Rear Panel Features 7
Table 3: Technical Specifications of the VM-114H2C 16
Table 4: Default Communication Parameters 16
Table 5: Protocol Definitions 18
Table 6: Instruction Codes for Protocol 2000 19

Introduction
1
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better! Our 1,000-plus different models now
appear in 11 groups1
Congratulations on purchasing your Kramer Desktop VM-114H2C 2 Input 1:4
HDMI DA/2x CAT5 Outputs. The VM-114H2C is ideal for:
that are clearly defined by function.
•Home theater, presentation and multimedia applications
•Rental and staging
The package includes the following items:
•VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs
•Power adapter (12V DC)
•Kramer RC-IR3 infrared remote control transmitter (including the required
batteries and a separate user manual2)
•This user manual2
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•Review the contents of this user manual
•Use Kramer high performance high resolution cables3
•Do not secure the cables in tight bundles or roll the slack into tight coils
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:
Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan
Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack
Adapters; GROUP 11: Sierra Products
2 Download up-to-date Kramer user manuals from http://www.kramerelectronics.com
3 The complete list of Kramer cables is available from http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps of the
VM-114H2C.

Overview
3
3
3 Overview
The high quality VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs is a
switcher/distribution amplifier for HDMI and TP (Twisted Pair) signals. It reclocks
and equalizes one of two selectable input signals and distributes it to two HDMI
and two TP outputs.
In particular, the VM-114H2C:
•Supports up to 2.25Gbps bandwidth per graphic channel (HDMI), 1.65Gbps
bandwidth per graphic channel (DGKat)1
•Can read and store in non-volatile memory the default EDID, or the EDID
2
block from one or a mix3
•Features I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent
EDID handling & processing algorithm ensures Plug and Play operation for
HDMI systems
of the output display devices, so it can then
provide the EDID information to the source even if the display device is not
connected
•Supports HDMI (V1.4 w 3D, Deep Color4
•Is HDCP compliant
, x.v.Color™ and 7.1
uncompressed audio channels (Dolby TrueHD, DTS-HD))
•Features LEDs indicating the selected input and active output
•Supports IR remote control and has a remote IR 3.5mm mini jack
•Is 12V DC fed and is housed in a Kramer desktop enclosure
1 Suitable for resolutions up to UXGA at 60Hz, and for all HD resolutions
2 EDID is Extended Display Identification Data (see Section 3.4 for a more detailed definition)
3 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different resolutions are
connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included in the EDID
4 On the HDMI input

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3.1 About HDMI
High-Definition Multimedia Interface (HDMI) is an uncompressed all-digital1
In particular, HDMI
audio/video interface, widely supported in the entertainment and home cinema
industry. It delivers the highest high-definition image and sound quality.
2
•Provides a simple
: 3interface between any audio/video source, such as a set-
top box, DVD player, or A/V receiver and video monitor, such as a digital
flat LCD/plasma television (DTV), over a single lengthy4
•Supports standard, enhanced, high-definition video, and multi-channel
digital audio
cable
5
•Transmits all ATSC HDTV standards and supports 8-channel digital audio,
with bandwidth to spare to accommodate future enhancements and
requirements
on a single cable
•Benefits consumers by providing superior, uncompressed digital video
quality via a single cable6
•Is backward-compatible with DVI (Digital Visual Interface)
, and user-friendly connector
•Supports two-way communication between the video source (such as a
DVD player) and the digital television, enabling new functionality such as
automatic configuration and one-button play
HDMI has the capacity to support:
•Existing high-definition video formats (720p, 1080i and 1080p @60Hz), as
well as standard definition formats such as NTSC or PAL
3.2 Using Shielded Twisted Pair Cable
Kramer engineers have developed special twisted pair cables to best match our
digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the
Kramer BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer BC-DGKat7a23
(CAT 7a 23 AWG cable). These specially built cables significantly outperform
regular CAT 5/CAT 6 /CAT 7a cables.
1 Ensuring an all-digital rendering of video without the losses associated with analog interfaces and their unnecessary digital-to-analog
conversions
2 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC
3 With video and multi-channel audio combined into a single cable, the cost, complexity, and confusion of multiple cables currently
used in A/V systems is reduced
4 HDMI technology has been designed to use standard copper cable construction at up to 15m
5 HDMI supports multiple audio formats, from standard stereo to multi-channel surround-sound. HDMI has the capacity to support
Dolby 5.1 audio and high-resolution audio formats
6 HDMI provides the quality and functionality of a digital interface while also supporting uncompressed video formats in a simple, cost-
effective manner

Overview
5
5
The VM-114H2C supports a range of up to 90m (295ft) at 1080i/SXGA, or up to
30m (98ft) at 1080p/UXGA on shielded BCP-DGKat524 cable; 90m (295ft) at
1080i or up to 70m (230ft) at 1080p/UXGA on shielded BCP-DGKat623 cable.
You can daisy-chain up to six devices with the maximum overall distance between
the first and last devices being cumulative and limited by the cable type used.
3.3 About the Power Connect™ Feature
The Power Connect™ feature here means that only one unit in a system, the
transmitter or receiver, can be connected to a power source when the devices are
within 90m (270ft) of each other. The Power Connect™ feature applies as long as
the cable can carry power. The distance does not exceed 90m on standard CAT 5
cable, for longer distances, heavy gauge cable should be used1
!
.
Warning: Using a TP cable that is incorrectly wired will
cause permanent damage to the device
3.4 Defining EDID
The Extended Display Identification Data (EDID2
3.5 Recommendations for Best Performance
) is a data-structure, provided by
a display, to describe its capabilities to a graphics card (that is connected to the
display’s source). The EDID enables the VM-114H2C to “know” what kind of
monitor is connected to the output. The EDID includes the manufacturer’s name,
the product type, the timing data supported by the display, the display size,
luminance data and (for digital displays only) the pixel mapping data.
To achieve the best performance:
•Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
•Do not secure the cables in tight bundles or roll the slack into tight coils
•Avoid interference from neighboring electrical appliances and position your
VM-114H2C away from moisture, excessive sunlight and dust
1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances
2 Defined by a standard published by the Video Electronics Standards Association (VESA)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VM-114H2C
6
4 Defining the VM-114H2C
Figure 1 and Table 1 define the front panel of the VM-114H2C.
Figure 1: VM-114H2C Front Panel
Table 1: VM-114H2C Front Panel Features
# Feature Function
1 IR Remote Control Sensor Sensor for the remote control IR transmitter
2 IR LED Lights yellow when receiving signals from the IR remote control
transmitter
3 REMOTE IR 3.5mm Mini Jack Connect to a remote IR sensor
4
EDID Buttons
READ Button Press (when one of the input LEDsis flashing to indicate a selected input)
to read the selected EDID (see Section 5.2)
5 SELECT
Button Press repeatedly to cycle through the inputs to select an input from which to read the EDID. The relevant LED flashes (see Section 5.2)
6
OUTPUT LEDS
1 The relevant LED lights green when an acceptor is connected to the
output1
2
3
4
7 POWER LED Lights green when the unit receives power
8 INPUT SELECTOR Button Press to select an input. The relevant IN 1 HDMI/IN 2 CAT5 LED lights
9 IN1 HDMI LED Input
LEDs Lights green when HDMI input 1 is selected
10 IN2 CAT5 LED Lights green when the TP CAT 5 input 2 is selected
1 Also lights or flashes during EDID setup (see Section 3.4)

Defining the VM-114H2C
7
7
Figure 2 and Table 2 define the rear panel of the VM-114H2C.
Figure 2: VM-114H2C Rear Panel
Table 2: VM-114H2C Rear Panel Features
# Feature Function
11 RS-232 9-pin D-sub (F)
Connector Connect to a PC or remote controller
12 12V DC Power Connector Connect to the +12V DC power adapter, center pin positive
13 IN1 (HDMI) Input
HDMI Connector Inputs
Connect to an HDMI source
14 IN2 (CAT5) Input
RJ-45 Connector Connect to aTP source (for example, PT-571 HDMI Line Transmitter,
VM-114H2C or VM-114H4C)
15 OUT 1 HDMI Output
Connectors Connect to the HDMI acceptors
OUT 2
16OUT 3 TP RJ-45 Output
Connectors Connect to the TP acceptors (for example, PT-572+HDMI Line Receiver,
VM-114H or VM-114H4C)
OUT 4

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H2C
8
5 Using the VM-114H2C
This section describes how to:
•Connect the VM-114H2C (see Section 5.1)
•Use the EDID SELECT button (see Section 5.2).
5.1 Connecting the VM-114H2C
Figure 3: Connecting the VM-114H2C
To connect1the VM-114H2C as illustrated2Figure 3in the example in :
1. Connect the HDMI source (for example, a DVD player) to the IN 1 (HDMI)
connector.
1 Switch off the power on each device before connecting it to your VM-114H2C. After connecting your VM-114H2C, switch on its
power and then switch on the power on each device
2 The power adapter is not shown

Using the VM-114H2C
9
9
2. Connect the TP source (for example, a PT-571 HDMI Line Transmitter1
3. Connect the HDMI OUT connectors to up to two HDMI acceptors (for
example, LCD TV or plasma displays)
,
another VM-114H2C or a VM-1114H4C) to the IN 2 (CAT5) connector.
4. Connect the TP RJ-45 output connectors to up to two TP acceptors (for
example, the PT-572+HDMI Line Receiver2
5. Optional—Plug the remote IR sensor into the front panel remote IR 3.5mm
mini jack.
, the VM-114H or the
VM-114H4C).
6. Optional—Connect a PC via RS-232 to the RS-232 port on the VM-114H2C
(see Section 5.3).
7. Connect the power adapter to the power socket on the VM-114H2C and to
the mains electricity (not shown in Figure 3).
8. Optional—Press the EDID READ button to acquire or change the EDID
information (see Section 5.2).
5.2 Acquiring the EDID
Each input on the VM-114H2C has a factory default EDID loaded3
3.4 (see
Section ). This lets you connect the power before having to connect one of the
acceptors. The EDID for each input can be changed independently by uploading an
EDID binary file to each input via the RS-232 port using Kramer EDID Sender
software4
You can acquire the EDID
. 5
•One output (the relevant output LED flashes)
from:
•The default EDID (all output LEDs flash)
•Up to four connected outputs using the Auto-mix Mode6
To acquire the EDID:
(all output LEDs
light)
1. Connect the output(s) from which you want to acquire the EDID.
2. Press the EDID SELECT button briefly.
The device enters the EDID programming mode. The last acquired EDID is
indicated by the lit LED (for example, if Output LED 2 is lit, the EDID
1 Another example is the TP-573
2 Another example is the TP-574
3 The VM-114H2C reads the EDID, which is stored in the non-volatile memory
4 Available for download from http://www.kramerelectronics.com
5 This is usually done only once, when the machine is being set up in an installation. Once acquired, the EDID is saved in non-volatile
memory and further acquisition is not necessary
6 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different resolutions are
connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included in the EDID

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H2C
10
acquired was from Output 2).
3. Press the EDID SELECT button repeatedly until the required EDID is
indicated based on the patterns described above.
4. Press the EDID READ button.
The relevant LEDs flash in a pattern for a few seconds as follows:
Slowly and then no longer lights. The EDID was successfully read.
Quickly and then no longer lights. The EDID was not read and the default
EDID was stored.
5.2.1 Disabling/Enabling Deep Color Support
You can disable EDID deep color support to prevent signal deterioration when
using long twisted pair cables on INPUT 2.
To disable deep color and acquire EDID:
1. Disconnect the power.
2. Connect the output or outputs from which you want to acquire the EDID.
3. Connect the power while pressing the EDID READ button.
4. Perform steps 3 through 5 in Section 5.2.
To enable deep color and acquire EDID:
1. Disconnect the power.
2. Connect the output or outputs from which you want to acquire the EDID.
3. Connect the power while pressing the EDID SELECT button.
4. Perform steps 3 through 5 in Section 5.2.
5.3 Connecting to the VM-114H2C via RS-232
You can connect to the VM-114H2C via an RS-232 connection using, for
example, a PC. Note that a null-modem adapter/connection is not required.
To connect to the VM-114H2C via RS-232:
•Connect the RS-232 9-pin D-sub rear panel port on the VM-114H2C unit
via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to
pin 5 need to be connected) to the RS-232 9-pin D-sub port on your PC
5.4 RS-232 and IR Control and Pass-through
The VM-114H2C can be controlled via RS-232 and infrared. Depending on how
the RS-232 and IR connections are configured, the device will either respond to
control signals or transparently pass them through to another receiver or
transmitter. Three examples in Sections 5.4.2.1, 5.4.2.2 and 5.4.2.3 of various
configurations illustrate this functionality.

Using the VM-114H2C
11
11
5.4.1 RS-232 Control and Pass-through Using the VM-114H2C
As shown in Figure 3, you can connect a PC (or other serial controller) directly to
the VM-114H2C to control the VM-114H2C.
The VM-114H2C also transparently passes bidirectional RS-232 signals over the
TP cable from the TP-573 transmitter to the TP-574 receiver. For example, a PC
connected to the RS-232 port on the TP-573 can control an RS-232-controllable
device (for example, a projection screen) connected to the TP-574.
Figure 4: VM-114H2C RS-232 Control and Pass-through
5.4.2 Local IR Control and IR Pass-through Using the VM-114H2C
The VM-114H2C provides an IR sensor and a 3.5mm mini jack for connecting a
remote IR emitter or sensor. When the VM-114H2C is connected to suitable
transmitters and receivers (for example, the TP-573 and TP-574), the
VM-114H2C can act as a pass-through for IR control signals, allowing remote
control of multiple devices using multiple IR remote controllers.
When there is no IR sensor or emitter connected to the IR Remote 3.5mm mini
jack, all signals received by the IR sensor on the front panel are passed to the
transmitter and receiver bi-directionally over the TP cable allowing control of
remote devices.
When an IR sensor or emitter is connected to the IR Remote 3.5mm mini jack, the
connection between the IR sensor on the front panel and the IR on the
transmitter/receiver is broken so that any signal received by the IR sensor on the
front panel remains local to the VM-114H2C and controls only the VM-114H2C.
To control any device you need to use the appropriate IR remote controller, for
example, the Kramer remote controller controls Kramer devices, the LCD remote

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H2C
12
controller controls the LCD display and so on, as shown in the following examples.
The following examples illustrate just three of the possible ways of connecting the
VM-114H2C to provide local and remote IR control.
5.4.2.1 IR Local Control and Pass-through Example One
The configuration is shown in Figure 5.
Figure 5: VM-114H2C IR Control and Pass-through Example One
A DVD player is connected to the TP-573 transmitter via an IR emitter.
An LCD display is connected to the TP-574 receiver via an IR emitter.
Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP
cabling.
To control a device, point the appropriate remote control for the device at the
VM-114H2C IR sensor.

Using the VM-114H2C
13
13
5.4.2.2 IR Local Control and Pass-through Example Two
The configuration is shown in Figure 6.
Figure 6: VM-114H2C IR Control and Pass-through Example Two
An IR sensor is connected to the TP-573 transmitter.
An LCD display is connected to the TP-574 receiver via an IR emitter.
Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP
cabling.
To control the LCD display, point the LCD display remote control either at the
TP-573 IR sensor or at the VM-114H2C IR sensor. To control the VM-114H2C,
point the Kramer remote control at the VM-114H2C IR sensor.

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H2C
14
5.4.2.3 IR Local Control and Pass-through Example Three
The configuration is shown in Figure 7.
Figure 7: VM-114H2C IR Control and Pass-through Example Three
The first DVD player (player 1) is connected to the TP-573 transmitter via an IR
emitter.
The second DVD player (player 2) is connected to the VM-114H2C via an IR
emitter.
An IR sensor is connected to the TP-574 receiver.
Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP
cabling.
To control DVD player 1, point the DVD player 1 IR remote control at the TP-574
IR sensor. To control DVD player 2, point the DVD player 2 IR remote control at
the TP-574 IR sensor. To control the VM-114H2C, point the Kramer remote
control at the VM-114H2C IR sensor.

Wiring the Twisted Pair RJ-45 Connectors
15
15
6 Wiring the Twisted Pair RJ-45 Connectors
When using STP cable, connect/solder the cable shield to the RJ-45 connector
shield. Figure 8 defines the TP pinout using a straight pin-to-pin cable with RJ-45
connectors.
i
Note, that the cable Ground shielding must be connected/soldered to
the connector shield.
EIA /TIA 568B
Figure 8: CAT 5 Pinout
PIN Wire Color
1 Orange / White
2 Orange
3 Green / White
4 Blue
5 Blue / White
6 Green
7 Brown / White
8 Brown
Pair 1 4 and 5
Pair 2 1 and 2
Pair 3 3 and 6
Pair 4 7 and 8

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
16
7 Technical Specifications
Table 3 includes the technical specifications1
Table 3: Technical Specifications of the VM-114H2C
of the VM-114H2C.
INPUTS: 1 HDMI Connector
1 TP on an RJ-45 Connector
OUTPUTS: 2 HDMI Connectors
2 TP on RJ-45 Connectors
BANDWIDTH: Up to 2.25Gbps bandwidth per graphic channel (HDMI), 1.65Gbps bandwidth
per graphic channel (DGKat)
COMPLIANCE WITH
HDMI STANDARD: Supports HDMI and HDCP
CONTROLS: Input select button, EDID select button, panel lock button, RS-232, local and
remote IR controls
INDICATOR LEDs: IR communication, Power, IN 1 HDMI, IN 2 CAT5, OUTPUT 1, 2, 3 and 4
POWER CONSUMPTION: 12V DC, 1.4A
OPERATING
TEMPERATURE: 0° to +55°C (32° to 131°F)
STORAGE
TEMPERATURE: -45° to +72°C (-49° to 162°F)
HUMIDITY: 10% to 90%, RHL non-condensing
DIMENSIONS: 21.5cm x 16.3cm x 4.4cm (8.5in x 6.4in x 1.7in) W, D, H
WEIGHT: 0.9kg (1.98lbs) approx.
ACCESSORIES: Power supply, RC-IR3 infrared remote control transmitter
OPTIONS: HDMI/HDMI male-to-male cables, RK-1 19” rack adapter
8 Default Communication Parameters
Table 4 lists the default communication parameters for the VM-114H2C.
Table 4: Default Communication Parameters
RS-232
Protocol 2000
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Command Format: HEX
Example (Output 1 to Input 1): 0x01, 0x81, 0x81, 0x81
1 Specifications are subject to change without notice

Default EDID
17
17
9 Default EDID
The factory default EDID is listed below.
Monitor
Model name............... VM114H2C
Manufacturer............. KRM
Plug and Play ID......... KRM0114
Serial number............ 505-707455010
Manufacture date......... 2009, ISO week 10
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 520 x 320 mm (24.0 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... 1 (CEA-EXT)
-------------------------
DDC/CI................... n/a
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.674 - Ry 0.319
Green chromaticity....... Gx 0.188 - Gy 0.706
Blue chromaticity........ Bx 0.148 - By 0.064
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 30-83kHz
Vertical scan range...... 56-76Hz
Video bandwidth.......... 170MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1280x720p at 60Hz (16:10)
Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1280 x 1024p at 60Hz - VESA STD
1600 x 1200p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA ST