Kramer WP-209 User manual

Kramer Electronics, Ltd.
USER MANUAL



Model:
WP-209
Wall Plate

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 1
3 Overview 3
4 Your WP-209 4
4.1 Your WP-209 Front Panel 4
4.2 Your WP-209 Right Panel 6
4.3 Your WP-209 Lower Panel 6
5 Using the WP-209 7
5.1 Installing the WP-209 8
5.2 Operating the WP-209 8
6 Technical Specifications 10
Figures
Figure 1: WP-209 Front Panel for the US Version 4
Figure 2: WP-209 Front Panel for the European Version 5
Figure 3: WP-209 Right Panel 6
Figure 4: WP-209 Lower Panel 6
Figure 5: Example of Conference Room WP-209 Installation 7
Figure 6: Connecting the AUDIO Output 8
Figure 7: Connecting the WP-209 9
Tables
Table 1: WP-209 Front Panel 5
Table 2: WP-209 Right Panel 6
Table 3: WP-209 Lower Panel 6
Table 4: Technical Specifications of the WP-209 10

Introduction
1
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video,
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
500-plus different models now appear in 8 Groups
1
, which are clearly defined
by function.
Congratulations on purchasing your WP-209 active wall plate, which is ideal for
graphics and audio installations in board, conference and training rooms, as well
as long distance signal distribution.
The package includes the following items:
WP-209
Power supply
This user manual
2
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables
3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2

Overview
3
3 Overview
The Kramer WP-209 wall plate features:
A computer graphics PC INPUT on a standard HD-15 connector
An amplified and equalized RGBHV/UXGA/YPbPr output on an HD-15
connector
An unbalanced stereo AUDIO input on a 3.5mm mini jack with a
corresponding balanced stereo AUDIO output on a 5-pole terminal block
In addition, the WP-209 wall plate comes with pass through connectors for:
Composite video on an RCA connector
Unbalanced stereo audio on RCA connectors
Ethernet on an RJ-45 connector
In particular, the WP-209 has:
Trimmer controls for UXGA EQ.
1
, and UXGA Level
Separate trimmer controls for right and left line audio level
Resolution exceeding UXGA, that ensures transparent operation
A standard 12 Volt DC feed
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your WP-209 away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
2
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Cable equalization
2 For example: model number AD2512C, part number 2535-000251

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your WP-209
4
4 Your WP-209
The Kramer WP-209E XGA/Audio/Video Line Driver is available in two
versions—one for the US and one for Europe.
This section defines the WP-209 front panel (see section 4.1), the right panel
(see section 4.2), and the lower panel (see section 4.3).
4.1 Your WP-209 Front Panel
Figure 1(the US version), Figure 2 (the European version) and Table 1 define
the front panel of the WP-209:
Figure 1: WP-209 Front Panel for the US Version

Your WP-209
5
Figure 2: WP-209 Front Panel for the European Version
Table 1: WP-209 Front Panel
# Feature Function
1 Holes (4) For fastening the wall plate in place
2 VIDEO RCA Connector
1
Connects to the composite/SDI video source
3 ETHERNET RJ-45 Connector
1
Connect to the ETHERNET
4 LEFT RCA Connector
1
Connects to the unbalanced left stereo audio source
5 RIGHT RCA Connector
1
Connects to the unbalanced right stereo audio source
6 LOOP HD15F Connector Connect to a local display
7 PC INPUT
2
HD15F Connector Connect to the computer graphics source
8 PC INPUT AUDIO INPUT 3.5mm
Mini Jack
Connects to the unbalanced stereo audio PC source
9 ON LED Illuminates when receiving power
1 This connector is a pass through connector
2 Can be used for any RGBHV resolution (for example, VGA, XGA, UXGA and so on). You can connect a component HD
source (for example, a set top box with YPbPr outputs), using a breakout VGA-to-RCA/BNC cable (for example, the Kramer
C-GM/3RVF cable). If you have a VGA to a 5 BNC cable, use the RGB wires only. For direct wiring, the input connector
PINOUT is as follows: PIN 1 for Pr; PIN 2 for Y; and PIN 3 for Pb

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your WP-209
6
4.2 Your WP-209 Right Panel
Figure 3 and Table 2 define the right panel of the WP-209:
Table 2: WP-209 Right Panel
# Feature Function
1 UXGA (PC) EQ.
1
Trimmer
Adjusts
2
the cable
compensation equalization
level
2 UXGA (PC) LEVEL
Trimmer
Adjusts
2
the computer graphics
signal level
3 R Trimmer Adjusts
2
the right audio output
signal level
4
AUDIO
LEVEL
L Trimmer Adjusts
2
the left audio output
signal level
Figure 3: WP-209 Right Panel
4.3 Your WP-209 Lower Panel
Figure 4 and Table 3 define the lower panel of the WP-209:
Table 3: WP-209 Lower Panel
# Feature Function
1 AUDIO
Terminal
Block
Connects to the
balanced stereo audio
acceptor
3
+12V
PIN
Connect (+) to the
connector for powering
the unit
2
POWER
GND
PIN
Connect (-) to the
Ground
Figure 4: WP-209 Lower Panel
1 Degradation and UXGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
2 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level
3 Can be used for unbalanced audio. To do this, connect using the “+” and “G” terminal only (leave the “–” terminal
unconnected – see Figure 6)

Using the WP-209
7
5 Using the WP-209
You can use your WP-209, for example, in a conference room, as the example
in Figure 5 illustrates:
Figure 5: Example of Conference Room WP-209 Installation
For details of how to:
Install your WP-209, see section 5.1
Operate your WP-209, see section 5.2

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the WP-209
8
5.1 Installing the WP-209
To install your WP-209:
1. Connect the HD15M output connector
1
to the pre-installed wiring in the
wall box opening that connects to the UXGA acceptor (for example, a
projector), as Figure 7 defines.
2. Connect the AUDIO output (for example, to a power amplifier with
speakers), as one of the following:
Figure 6: Connecting the AUDIO Output
3. Connect your 12V DC power supply to the POWER pins
2
, taking care that
polarity is correct.
4. Insert the WP-209 directly into the wall box opening, and then mount the
front panel securely using the screws.
5.2 Operating the WP-209
To operate your WP-209:
1. Connect your computer graphic’s source (for example, a laptop’s digital
graphics card) to the PC INPUT HD15F connector and to the PC INPUT
audio 3.5mm mini jack, for example, using a Kramer C-GMA/GMA cable
(VGA HD15M +Audio jack to VGA HD15M +Audio jack)
3
. (Alternatively,
you can connect separate audio source to the PC AUDIO INPUT.).
2. Connect the LOOP HD15F connector to an additional display
3. Connect the video source (for example, a composite video player) to the
VIDEO RCA connector and to the LEFT and RIGHT audio RCA connectors.
4. If required, connect the ETHERNET RJ-45 connector.
1 For component HDTV, use a breakout VGA-to-RCA/BNC cable (for example, the Kramer C-GM/3RVF cable). For direct
wiring, the output connector PINOUT is as follows: PIN 1 for Pr; PIN 2 for Y; and PIN 3 for Pb
2 Connect the wire labeled “+” to the +12V pin, and the wire labeled “–” to the GND pin
3 Not supplied. The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

Using the WP-209
9
5. If required, adjust
1
the left and/or right AUDIO LEVEL, and/or the
UXGA EQ. level, and/or the UXGA LEVEL.
Figure 7: Connecting the WP-209
1 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
10
6 Technical Specifications
Table 4 includes the technical specifications:
Table 4: Technical Specifications
1
of the WP-209
INPUTS: 1 looping UXGA INPUT on HD-15 connectors
1 unbalanced stereo audio PC INPUT on a 3.5mm mini jack
1 composite video pass through input on an RCA connector
1 unbalanced stereo pass through input on 2 RCA connectors
1 Ethernet pass through input on an RJ-45 connector
OUTPUTS: 1 UXGA on an HD-15 connector and cable
1 balanced stereo audio on a 5-pole terminal block
MAX. OUTPUT LEVEL: UXGA: 2.3Vpp AUDIO: 6.8Vpp
AUDIO BANDWIDTH (-3dB):
>100kHz
RESOLUTION: Up to UXGA; 1080p
DIFF. GAIN: 2.73%
DIFF. PHASE: 0.09 Deg.
K-FACTOR: 0.1%
S/N RATIO: VIDEO: 71dB AUDIO: 85dB
CROSSTALK (all hostile): AUDIO: <–32dB
CONTROLS: UXGA level: –7.5dB to +4.5dB
UXGA EQ. level: 0dB to +23dB
AUDIO level left and right controls: –76dB to +6.2dB
COUPLING: VIDEO: DC AUDIO: Input: AC, Output: DC
AUDIO THD + NOISE: 0.018%
AUDIO 2nd HARMONIC: 0.003%
POWER SOURCE: 12 VDC, 171mA
DIMENSIONS: 2 gang (Europe and USA)
WEIGHT: 0.3 kg (0.67 lbs.) approx
ACCESSORIES: Power supply
1 Specifications are subject to change without notice

11

Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: [email protected]
P/N: 2900-289 REV 2
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Caution
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.