Kramer VP-510 User manual

USER MANUAL
MODEL:
VP-510
4K to 2K Down-Converter
P/N: 2900-300449 Rev 2 www.kramerAV.com

VP-510 – Contents i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the VP-510 4K to 2K Down-Converter 5
4Connecting the VP-510 6
5Technical Specifications 7
Figures
Figure 1: VP-510 4K to 2K Down-Converter 5
Figure 2: Connecting the VP-510 4K to 2K Down-Converter 6

VP-510 - Introduction 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined by
function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer VP-510 4K to 2K Down-Converter.
This product, which incorporates HDMI™ technology, is ideal for:
•Allows the use of legacy equipment with the latest 4K signals
•Multimedia, board rooms, and video-conferencing

2 VP-510 - Getting Started
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•Review the contents of this user manual
Go to www.kramerav.com/downloads/VP-510 to check for up-to-date user
manuals, application programs, and to check if firmware upgrades are
available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
•Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•Do not secure the cables in tight bundles or roll the slack into tight coils
•Avoid interference from neighbouring electrical appliances that may adversely
influence signal quality
•Position your VP-510 away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning: Use only the Kramer Electronics power supply that is
provided with the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing

VP-510 - Getting Started 3
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims
to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country go
to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 VP-510 - Overview
3 Overview
The VP-510 is a down-converter for 4K HDMI signals. The unit takes a 4K
resolution input, provides a loop output and down-converts it to 2K resolution. It
allows the use of legacy equipment with the latest 4K signals.
When used with a non-4K (or unsupported 4K) input source, the input is routed to
the output with no down-conversion or scaling.
The VP-510 features:
•A maximum data rate of 10.2Gbps (3.4Gbps per graphic channel)
•HDMI signal downscaling from 4K UHD to 2K / 1080p
•HDMI support for 3D, Deep Color, x.v.Color™, Dolby® TrueHD, Dolby Digital
Plus, DTS−HD® and 7.1 multi−channel audio
•Support for HDMI 1.4 and HDCP 1.4
•4K resolution down-scaling for 4096×2160p@24Hz and
3840×2160p@24/25/30Hz
•HDMI signal bypass for resolutions that are not down-scaled
•A simultaneous HDMI output (loop)
•EDID bypass of loop output

VP-510 - Overview 5
3.1 Defining the VP-510 4K to 2K Down-Converter
This section defines the VP-510.
Figure 1: VP-510 4K to 2K Down-Converter
# Feature Function
1
ON LED
Lights when the unit is power on
2
BYPASS LED
Lights when a source is connected and the signal is
bypassed to the OUTPUT connector
3 4K IN LED Lights when a 4K source that can be downscaled is
connected. The downscaled signal is available on the
OUTPUT connector
4 OUTPUT CONNECTED
LED
Lights when an output device is connected
5
INPUT HDMI Connector
Connects to an HDMI source
6
LOOP HDMI Connector
Connects to a display
7
OUTPUT HDMI Connector
Connects to a 1080p/2K acceptor
8
PROG USB Connector
Used for upgrading the firmware
9
5V DC Connector
Connects to a 5V DC power source

6 VP-510 - Connecting the VP-510
4 Connecting the VP-510
Always switch off the power to each device before connecting it to
your VP-510. After connecting your VP-510, connect its power and
then switch on the power to each device.
Note: The EDID is read through the loop output. The last EDID
connected is saved as a default for when there is no connection to
the loop output.
To connect the VP-510 as illustrated in the example in Figure 2:
1. Connect a 4K HDMI source (for example, a Blu-ray player) to the INPUT
HDMI connector.
2. If desired, connect an HDMI acceptor (for example, a 4K display) to the
LOOP HDMI connector.
3. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a
2K display).
4. Connect a 5V DC power supply to the 5V DC connector to power on the
device.
Figure 2: Connecting the VP-510 4K to 2K Down-Converter

VP-510 - Technical Specifications 7
5 Technical Specifications
INPUTS:
1 HDMI (looping) on an HDMI connector
OUTPUTS:
1 HDMI and 1 loop on HDMI connectors
PORT:
1 mini-USB for firmware upgrading
MAX. DATA RATE:
10.2Gbps (3.4Gbps per graphic channel)
INDICATOR LEDS:
ON, BYPASS, 4K IN, OUTPUT CONNECTED
DOWNSCALED 4K
RESOLUTIONS:
3840x2160 @23.98/24Hz, 3840x2160 @25Hz, 3840x2160
@29.97/30Hz, 4096x2160 @23.98/24Hz
POWER CONSUMPTION:
5V DC, 550mA
OPERATING
TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12.0cm x 7.2cm x 2.4cm (4.72” x 2.81” x 0.96”) W, D, H
WEIGHT:
0.16kg (0.35lbs)
INCLUDED ACCESSORIES:
Power supply
OPTIONAL:
RK-3T 19” rack adapter
Specifications are subject to change without notice
For the most updated resolution list, go to our Web site at http://www.kramerelectronics.com

SAFETY WARNING
Disconnect the unit from the power supply before opening andservicing
For the latest information on our products and a list of Kramer distributors,
visit our Web site to find updates to this user manual.
We welcome your questions, comments, and feedback.
www.kramerAV.com
[e-mail]
P/N:
2900-300449
Rev:
2