Overview
3 Overview
The FC-331 SD/HD-SDI to HDMI Converter is a high-performance format
converter for SDI (SMPTE 259M), HD-SDI (SMPTE 292M), and 3G
HD-SDI (SMPTE 424M) signals. It converts an SDI (Level A) audio and
video signal to an HDMI output signal with the same resolution and frame
rate
.
The FC-331 features:
An SD/HD-SDI/3G HD-SDI input on a BNC connector
An SDI loop on a BNC connector and an HDMI output
HDTV compatibility
Automatic active input LED indicators on the front panel. Green
indicates a standard definition (SDI) input signal and blue indicates a
high-definition (HD-SDI) input signal
5V DC power
Medical equipment compliance
3.1 Accessory to Medical Equipment (IEC 60601-1)
In the modern medical environment remote access is essential, for example,
to transfer clinical data between doctors and to train to medical students.
The FC-331 is certified according to the IEC 60601-1-2, Clause 2.1.3,
Medical Electrical Equipment, Part 1: General Requirements for EMC
standard which is required when accessory devices are used at locations
where medical personnel and patients are present.
The FC-331 constitutes an optional component that can be considered
necessary and suitable as part of medical equipment or for use as part of a
medical system to provide real time simultaneous video feeds to those
present at the local medical environment and at remote locations. In this
environment, the FC-331 can be added to the system ONLY if the
connecting equipment has been evaluated and meets the IEC 60601-1-2
EMC standards. Note, that when attaching accessory devices to a digital or
analog interface, they must comply with the IEC standard for which they
are used: EMC Standard (IEC 60601-1-2), Information Technology
equipment (IEC 60950-1 (2ed)).
No scaling is performed
