Kramer TP-900UHD User manual

USER MANUAL
TP-900UHD
HDMI/HDBaseT Receiver/Switcher/Scaler
MODEL:
KRAMER.RU

2KRAMER ELECTRONICS, LTD.
TP-900UHD QUICK START GUIDE
This guide helps you install and use your product for the first time. For more detailed information, go to
http://www.kramerav.com/manual.
Step 1: Check what’s in the box
Step 2: Get to know your TP-900UHD
TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler
1 Power supply (12V DC)
4 Rubber feet
1 Quick Start Guide
Feature Function
1 IN LED Lights green when the HDMI input is selected and blue when HDBT is selected. It ashes if no
input signal
2 HDBT/HDMI Button Press to select remote HDBT or local HDMI source
3 HDMI output status LED Lights green when an HDMI acceptor is connected
4 HDBT LINK status LED Lights green when the HDBT link between transmitter and receiver is successfully established
and is active
5 ON LED Lights green when the unit is powered from local 12V DC source and lights blue when from
remote HDBT
6 MENU Button Press to enter the conguration menu. When the menu is displayed, press to exit one level up.
7 ENTER Button When not in OSD, press ENTER to call input status.
In OSD, press Enter to selects and activates a menu item or to accept a parameter value. Press
and hold together with the “-“ or “+” to accelerate auto increment.
8 “-“ Button When not in OSD, press and hold together with the “+” to set factory default output resolution
1080p.
In OSD, press to move backward through the sub-menu list or to decrement the parameter
value. Press and hold together with the “+“ button to set default value
9 +/FREEZE Button When not in OSD, press to freeze the image. Press and hold together with the “-” to set factory
default output resolution 1080p.
In OSD, press to move forward through the sub-menu list or to increment the parameter val-
ue. Press and hold together with the “-“ button to set factory default value
10 FREEZE LED Lights green when image is frozen

3
Feature Function
11 HDBT IN RJ-45 Connector Connects to an HDBaseT transmitter
12 HDMI IN Connector Connect to HDMI source
13 HDMI OUT Connector Connects to an HDMI acceptor
14 AUDIO BALANCED OUT
Terminal Block Connector
Connect the balanced stereo audio output to a balanced stereo audio acceptor
15 S/PDIF digital audio
output
Connect to digital audio acceptor
16 IR input/output Connect to IR Emitter or Sensor for the remote control of any external device
17 Ethernet RJ-45 Connector Connect via a LAN to a PC for unit control or to any external device to establish pass-through
Ethernet link between this device and another device connected to HDBT transmitter
18 RS-232 Terminal Block
Connector
Connects to a controller or to any external device to establish pass-through serial link be-
tween this device and another device connected to RS-232 port of HDBT transmitter
19 12V DC +12V DC connector for powering the unit
Step 3: Install the TP-900UHD
Attach the rubber feet and place on a table or mount the TP-900UHD in a rack (using an optional RK-T2B rack mount).
Step 4: Connect the inputs and outputs
Always switch o the power on each device before connecting it to your TP-900UHD.
Always use Kramer high-performance cables connecting AV equipment to the TP-900UHD.
Step 5: Connect the power
If the unit does not receive power via PoE, connect the 12V DC power adapter to the TP-900UHD and plug the adapter into the main
electricity.

CONTENTS
4KRAMER ELECTRONICS, LTD.
CONTENTS
1 INTRODUCTION 6
2 GETTING STARTED 7
2.1 Achieving the Best Performance 7
2.2 Safety Instructions 8
2.3 Recycling Kramer Products 8
3 OVERVIEW 9
4 DEFINING THE TP-900UHD 10
5 CONNECTING THE TP-900UHD 12
5.1 Connecting the Ethernet Port Directly to a PC 13
5.2 Remote control of unit via HDBaseT Ethernet Link 15
5.3 Connecting the Ethernet Port via a Network Hub or Switch 16
5.4 RS-232 Control over HDBaseT 16
5.5 IR Control Over HDBaseT 16
6 OPERATING THE TP-900UHD 17
6.1 Operating the TP-900UHD Using the Front Panel Buttons 17
6.2 Using the OSD 17
6.3 The OSD Menu Structure 18
6.4 Operating the TP-900UHD Remotely 21
6.5 The settings that are recommended to optimize CLEAN SWITCH feature 22
6.6 Different Modes of Inputs Switching 22
7 UPGRADING THE FIRMWARE 23
8 TECHNICAL SPECIFICATIONS 24
9 DEFAULT COMMUNICATION PARAMETERS 25
10 KRAMER PROTOCOL 3000 26
10.1 Kramer Protocol 3000 Syntax 26
Host Message Format 26
Simple Command 26
Command String 26
Device Message Format 26
Device Long Response 27

CONTENTS
5
Command Terms 27
Entering Commands 28
Command Forms 28
Chaining Commands 28
Maximum String Length 28
10.2 Kramer Protocol 3000 Commands 29
Common Commands 29
Device Speci c Commands 29
FIGURES
Figure 1: TP-900UHD HDMI HDBaseT Receiver Switcher Scaler Front Panel 10
Figure 2: TP-900UHD HDMI HDBaseT Receiver Switcher Scaler Rear Panel 11
Figure 3: Connecting the TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler 12
Figure 4: Local Area Connection Properties Window 14
Figure 5: Internet Protocol Version 4 Properties Window 14
Figure 6: Internet Protocol Properties Window 15

INTRODUCTION
6KRAMER ELECTRONICS, LTD.
1 INTRODUCTION
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique,
creative, and a ordable solutions to the vast range of problems that confront video, audio, presentation,
and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most
of our line, making the best even better!
Our 1,000-plus di erent models now appear in 14 groups that are clearly de ned by function:
GROUP 1: Distribution Ampli ers;
GROUP 2: Switchers and Routers;
GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters;
GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers;
GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters;
GROUP 11: Sierra Video Products;
GROUP 12: Digital Signage;
GROUP 13: Audio;
and GROUP 14: Collaboration.
Congratulations on purchasing your Kramer TP-900UHD HDMI/HDBT Receiver/Switcher/Scaler, which is
ideal for:
• Professional broadcasting and production studios
• Home theater, presentation and multimedia applications
• Post production

GETTING STARTED
7
2 GETTING STARTED
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging materials for possible
future shipment
• Review the contents of this user manual
Go to http://www.kramerav.com/downloads to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
• Use only good quality connection cables (we recommend Kramer high-performance, high-resolu-
tion cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances that may adversely in uence signal quality
• Position your TP-900UHD away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be connected to other equip-
ment that is installed inside a building.

GETTING STARTED
8KRAMER ELECTRONICS, LTD.
2.2 Safety Instructions
Caution: There are no operator serviceable parts inside the unit.
Warning: Use only the power cord that is supplied with the unit.
Warning: Do not open the unit. High voltages can cause electrical shock! Servicing
by quali ed personnel only.
Warning: Disconnect the power and unplug the unit from the wall before installing .
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the
amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European
Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of
waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s
recycling arrangements in your particular country go to our recycling pages at http://www.kramerav.
com/support/recycling/.

OVERVIEW
9
3 OVERVIEW
The TP-900UHD comprises HDBaseT signal receiver and additional local HDMI input and can perform
CLEAN SWITCH between these two inputs. It is capable to scale the picture to match the resolution
of the monitor and can maintain stable, without intermission output HDMI signal while input signal
changes format or resolution. Besides that, it allows transmitting of RS-232, IR, Ethernet signals via
CAT6.
In particular, the TP-900UHD features:
• Resolution support for up to 4K@60Hz (4:2:0) UHD
• An HDBaseT input
• A local HDMI input
• An HDMI output
• A bidirectional RS-232 port for embedding/de-embedding control commands in the HDBaseT data
stream
• Infrared input and output ports for controlling devices over the HDBaseT data stream
• Audio de-embedding to the balanced stereo line out and to the S/PDIF digital out
• Maintains constant sync or optionally frozen last picture on the output, even when the input video
signal is lost or interrupted
• System range up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to 180m
(590ft) extra range mode (1080p @60Hz @24bpp) when using BC-UNIKAT cables
• A built-in ProcAmp for convenient signal adjustment
• An On-Screen Display (OSD) for easy setup and adjustment, accessible via the front-panel buttons
• A non-volatile memory that retains the last settings and can hold up to 16 user-de nable settings.
• A freeze button
The machine is fed from an external 12V DC source or optionally from HDBT POE system, making it suit-
able for  eld operation.
You can control the TP-900UHD using the front panel buttons, or remotely via:
• A PC connected to the Ethernet port on the device via a LAN using the control software
• A PC connected to the Ethernet port of remote HDBT transmitter using the same control software

DEFINING THE TP-900UHD
10 KRAMER ELECTRONICS, LTD.
4 DEFINING THE TP-900UHD
Figure 1 defines the front panel of the TP-900UHD.
№Feature Function
1IN LED Lights green when the HDMI input is selected and blue when HDBT input is select-
ed. It  ashes if input signal is lost
2 HDBT/HDMI Button Press to select remote HDBT or local HDMI source
3HDMI output status LED Lights green when an HDMI acceptor is connected
4HDBT LINK status LED Lights green when the HDBT link between transmitter and receiver is successfully
established and is active
5ON LED Lights green when the unit is powered from local external 12V DC source and
lights blue when from remote HDBT POE system
6MENU Button Press to enter the con guration menu. When the menu is displayed, press to exit
one level
7ENTER Button When not in OSD, press ENTER to call input signal status menu.
In OSD, press Enter to selects and activates a menu item or to accept a parameter
value. Press and hold together with the “-“ or “+” to scroll rapidly through parameter.
8 “-“ Button When not in OSD, press and hold together with the “+” to set factory default out-
put resolution 1080p.
In OSD, press to move backward through the sub-menu list or to decrement the
parameter value. Press and hold together with the “+“ button to set rapidly param-
eter factory default value
9+/FREEZE Button When not in OSD, press to freeze the image. Press and hold together with the “-”
to set factory default output resolution 1080p.
In OSD, press to move forward through the sub-menu list or to increment the
parameter value. Press and hold together with the “-“ button to set rapidly param-
eter factory default value
10 FREEZE LED Lights green when image is frozen
Figure 1: TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler Front Panel

DEFINING THE TP-900UHD
11
Figure 2: TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler Rear Panel
Figure 2 defines the rear panel of the TP-900UHD.
№Feature Function
1IN LED Lights green when the HDMI input is selected and blue when HDBT input is select-
ed. It  ashes if input signal is lost
2 HDBT/HDMI Button Press to select remote HDBT or local HDMI source
3HDMI output status LED Lights green when an HDMI acceptor is connected
4HDBT LINK status LED Lights green when the HDBT link between transmitter and receiver is successfully
established and is active
5ON LED Lights green when the unit is powered from local external 12V DC source and
lights blue when from remote HDBT POE system
6MENU Button Press to enter the con guration menu. When the menu is displayed, press to exit
one level
7ENTER Button When not in OSD, press ENTER to call input signal status menu.
In OSD, press Enter to selects and activates a menu item or to accept a parameter
value. Press and hold together with the “-“ or “+” to scroll rapidly through parameter.
8 “-“ Button When not in OSD, press and hold together with the “+” to set factory default out-
put resolution 1080p.
In OSD, press to move backward through the sub-menu list or to decrement the
parameter value. Press and hold together with the “+“ button to set rapidly param-
eter factory default value
9+/FREEZE Button When not in OSD, press to freeze the image. Press and hold together with the “-”
to set factory default output resolution 1080p.
In OSD, press to move forward through the sub-menu list or to increment the
parameter value. Press and hold together with the “-“ button to set rapidly param-
eter factory default value
10 FREEZE LED Lights green when image is frozen

CONNECTING THE TP-900UHD
12 KRAMER ELECTRONICS, LTD.
5 CONNECTING THE TP-900UHD
Figure 3: Connecting the TP-900UHD HDMI/HDBaseT Receiver/Switcher/Scaler

CONNECTING THE TP-900UHD
13
Always switch off the power to all devices before connecting them to your TP-900UHD.
After connecting your TP-900UHD, connect its power and then switch on the power to each
device.
1. Connect the output from an HDBaseT transmitter (for example, a TP-582T) to the HDBT IN RJ-45
connector.
2. Connect an HDMI video source to the HDMI IN connector.
3. Connect the HDMI OUT connector to an HDMI acceptor (for example, a display).
4. Connect the AUDIO OUT terminal block connector to a balanced stereo audio acceptor (for exam-
ple, an ampli er).
5. Connect the S/PDIF connector to an acceptor of digital Audio
6. Connect an IR Sensor or Emitter to the IR 3.5mm mini jack.
7. Connect the Ethernet port to a PC
8. If required, connect the RS-232 3-pin connector to an RS-232 PC port or the Remote Controller.
9. Connect the 12V DC power adapter to the power socket and connect the adapter to the mains
electricity.
5.1 Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the TP-900UHD directly to the Ethernet port on your PC using a
cable (straight and cross are allowed) with RJ 45 connectors.
This type of connection is recommended for identifying the TP-900UHD with the factory
configured default IP address.
After connecting the TP-900UHD to the Ethernet port, configure your PC as follows:
1. Click Start > Control Panel > Network and Sharing Center.
2. Click Change Adapter Settings.
3. Highlight the network adapter you want to use to connect to the device and click Change settings
of this connection.
The Local Area Connection Properties window for the selected network adapter appears as shown
in Figure 4.

CONNECTING THE TP-900UHD
14 KRAMER ELECTRONICS, LTD.
Figure 4: Local Area Connection Properties Window
4. Click on Internet Protocol Version 4 (TCP/IPv4) to highlight the selection.
5. Click Properties.
The Internet Protocol Properties window relevant to your IT system appears as shown in Figure 5.
Figure 5: Internet Protocol Version 4 Properties Window

CONNECTING THE TP-900UHD
15
6. Select Use the following IP Address for static IP addressing and  ll in the details as shown
in Figure 6.
You can use any IP address in the range 192.168.1.1 to 192.168.1.255 (excluding 192.168.1.39) that
is provided by your IT department.
Figure 6: Internet Protocol Properties Window
7. Click OK.
8. Click Close.
5.2 Remote control of unit via HDBaseT Ethernet Link
You can connect the Ethernet port of the remote HDBaseT transmitter (if available) to the Ethernet
port of a PC to obtain remote control of TP-900UHD via HDBaseT Link. All IP address configurations
for PC must be the same as in previous 5.1 item.

CONNECTING THE TP-900UHD
16 KRAMER ELECTRONICS, LTD.
5.3 Connecting the Ethernet Port via a Network Hub
or Switch
You can connect the Ethernet port of the TP-900UHD to the Ethernet port on a network hub using a
straight through cable with RJ-45 connectors.
5.4 RS-232 Control over HDBaseT
You can connect to the transmitter/receiver system via an RS-232 connection.
To make this connection active, it is necessary in SYSTEM PARAMETER submenu set parameter
PORT RS232 DESTINATION: to “PASS THROUGH” option.
To connect the RS-232 9-pin D-sub serial port:
• Pin 2 to the TX pin on the TP-900UHD RS-232 terminal block
• Pin 3 to the RX pin on the TP-900UHD RS-232 terminal block
• Pin 5 to the GND pin on the TP-900UHD RS-232 terminal block
Figure 3 shows RS-232 bidirectional control of the LCD Display by a module RC-52 that is connected to
a TP-582T.
5.5 IR Control Over HDBaseT
Since the IR signal on the TP-582T transmitter and TP-900UHD receiver is bidirectional, you can use a
remote control transmitter (that is used for controlling a peripheral device, for example, a DVD player)
to send commands (to the AV equipment) from either end of the transmitter /receiver system. To do so,
you have to use the Kramer external IR sensor on one end (P/N: 95-0104050) and the Kramer IR emitter
cable on the other end (P/N: C-A35/IRE-10)
Two IR Emitter Extension Cables are also available: a 15 meter cable and a 20 meter cable.
The example in Figure 3 illustrates how to control the DVD player that is connected to TP-582T using
a remote control, via the TP-900UHD. In this example, the External IR Sensor is connected to the IR
connector of the TP-900UHD and an IR Emitter is connected between the TP-582T and the DVD player.
The DVD remote control sends a command while pointing towards the External IR Sensor. The IR signal
passes through the TP cable and the IR Emitter to the DVD player, which responds to the command sent.

OPERATING THE TP-900UHD
17
6 OPERATING THE TP-900UHD
6.1 Operating the TP-900UHD Using the Front Panel
Buttons
During normal operation (without the OSD), the front panel buttons performs following functions:
• Pressing HDBT/HDMI alternatively select either HDBT or HDMI inputs
• Pressing MENU opens the on-screen display (OSD) (an item of main menu, for example “SETUP CON-
FIGURATION”), the next press closes the OSD
• Pressing ENTER (when not in OSD) opens input signal status (for example “INPUT: HDMI 1080P 60
ASPECT16:9”)
• Pressing +/FREEZE freezes image, the next press unfreezes the display
• Pressing +/FREEZE and “-“ buttons together reset the output resolution to 1080p60
6.2 Using the OSD
You can use the OSD to set a wide variety of parameters. When the MENU button is pressed, the main
menu opens allowing access to all the device settings.
While the OSD is open, the front panel buttons perform the following functions:
• Pressing ENTER selects and activates a menu item or accepts the parameter value set. Press and
hold ENTER button together with the “-“ or with “+” to accelerate auto decrement or increment of
parameter values.
• Pressing - or + move forward and backward through the menu items and decrement or increment
the parameter values. Press and hold the “-“ button together with “+” button to set rapidly parame-
ter factory default value (only when the OSD is open).
• Pressing MENU when the OSD is open, exit menu one level hierarchy up.
As an example of setting parameters, to increase the contrast on the display:
1. From normal operation, press MENU. An item of the main OSD menu appears on the screen.
2. Press the + or – button to navigate to submenu IMAGE QUALITY ADJUSTING.

OPERATING THE TP-900UHD
18 KRAMER ELECTRONICS, LTD.
3. Press ENTER and then using buttons + or - navigate to parameter CONTRAST.
4. Press ENTER. The contrast value parameter changes to red.
5. Press the + button to increase the value (increase the contrast) or the – button to decrease the value
(decrease the contrast). The value ranges for contrast from 50% to 150% (100% - factory default
value).
6. Press and hold the + button or the – button to obtain auto decrement or increment of the parame-
ter.
7. Press and hold ENTER button together with the “-“ or with “+” to accelerate auto decrement or auto
increment of parameter values.
8. Press ENTER to accept and store the value (the parameter value  ashes).
9. To return to one level menu hierarchy up, press MENU button.
6.3 The OSD Menu Structure
Submenu Parameter Values Notes
SETUP
CONFIGURATION LOAD SETUP # 1 – 16 Default 1
Load setup # into current active
setup
SAVE Current SETUP as
SETUP #
1 – 16
Default 1
Save Current Setup as Setup #
RESET Current Setup to
FACTORY Default -Reset Current Setup to Factory Default
INPUT
CONFIGURATION INPUT SWITCH MODE
Forced by HDMI/HDBT button
Auto when input signal loss
Auto to last connected input
De nes the behavior of input switch
engine when input signals or con-
nections change
INPUT HDMI HDCP
CAPABILITY
YES - default
NO
Assigns HDCP capability for HDMI
input
INPUT HDBT HDCP
CAPABILITY
YES - default
NO
Assigns HDCP capability for HDBT
input
Input SIGNAL LOSS
handle mode
Blue screen – default
Black screen
Freeze Last Picture
Turn o HDMI output
Sets the operation when input sig-
nal is not present
Turn o HDMI output about 20
seconds after input loss
EXTRA RANGE DISABLED – default
ENABLED
Option ENABLED allows to extend
length of HDBT cable up to 180m
(only for resolutions not higher
than 1080p/60)
SELECT EDID UHD 4K - default
1080P
UHD 4K EDID will allow a source to
output up to 4K signal, while 1080P
option will limit the source to FullHD
resolution

OPERATING THE TP-900UHD
19
Submenu Parameter Values Notes
OUTPUT
CONFIGURATION
OUTPUT STANDARD 480i/60
576i/50
480p/60
576p/50
720p/50
720p/59.94
720p/60
640x480/60
640x480/72
640x480/75
640x480/85
800x600/60
800x600/72
800x600/75
800x600/85
1024x768/60
1024x768/70
1024x768/75
1024x768/85
1152x864/75
1280x768/60 RB
1280x768/60
1280x768/75
1280x800/60
1280x960/60
1280x960/85
1280x1024/60
1280x1024/75
1360x768/60
1366x768/60
1400x1050/60 RB
1400x1050/60
1400x1050/75
1440x900/60 RB
1440x900/60
1440x900/75
1440x900/85
1080i/50
1080i/59.94
1080i/60
1080psf/23.98
1080psf/24
1080psf/25
1080psf/29.97
1080psf/30
1080p/23.98
1080p/24
1080p/25
1080p/29.97
Set Standard of output Signal
1080p/30
1080p/50
1080p/60 - DEFAULT
1600x1200/60
1680x1050/60 RB 1680x1050/60
1920x1200/60 RB
3840x2160p24

OPERATING THE TP-900UHD
20 KRAMER ELECTRONICS, LTD.
Submenu Parameter Values Notes
OUTPUT
CONFIGURATION OUTPUT STANDARD
3840x2160p25
3840x2160p30
3840x2160p50
3840x2160p60
TEST SIGNAL
NO TEST SIGNAL - default
COLOR BARS100%
SPLIT BARS 100%
TILT LINE
CROSS HATCH
SPLIT CROSS HATCH
MODULATED RAMPS
MOVING TILT LINE
Select any TEST Signal for output
instead of HDMI or HDBT input.
OUTPUT HDMI - DVI
SELECT METHOD
AUTO 1 – HDMI priority
AUTO 2 – DVI priority
Forced HDMI always
Forced DVI always
If Sink EDID is not available, then
will be selected HDMI format when
AUTO 1, and DVI - when AUTO 2
OUTPUT HDCP MODE
FOLLOW INPUT – default
FOLLOW OUTPUT
ALWAYS ON
ALWAYS OFF
HDCP on the output depends on
HDCP on the input
HDCP on the output depends on
HDCP capability of the Sink
HDCP on the output is active always
HDCP on the output is not active.
If input signal contains HDCP then
output signal will be muted
IMAGE QUALITY
ADJUSTING CONTRAST 50% to 150% Default 100%
Set the contrast of the image
BRIGHTNESS 50% to 150%
Default 100%
Set the brightness of the image
COLOR 0% to 150%
Default 100%
Set the color of the image
SHARPNESS 0% to 110%
Default 0%
Set the sharpness (edge contrast)
UHD transition to HD NO FILTER – Default
SOFT FILTER ENABLED
The setting is active only while down
conversion from UHD to HD. If ENA-
BLED then the image is smoothed at
the cost of sharpness
IMAGE GEOMETRY
ADJUSTING HORIZONTAL SIZE 50% to 150% Default 100%
Set Horizontal Image Size only if
input Aspect Ratio is near to 16:9
VERTICAL SIZE 50% to 150%
Default 100%
Set Vertical Image Size only if input
Aspect Ratio is near to 16:9
HORIZONTAL SIZE 50% to 150%
Default 100%
Set Horizontal Image Size only if
input Aspect Ratio is near to 4:3
VERTICAL SIZE 50% to 150%
Default 100%
Set Vertical Image Size only if input
Aspect Ratio is near to 4:3
HORIZONTAL IMAGE
POSITION
-10.0% to +10.0%
Default 0%
Set Horizontal Image Position
VERTICAL IMAGE
POSITION
-10.0% to +10.0%
Default 0%
Set Vertical Image Position