KREAFUNK toCHARGE MINI II User manual

toCHARGE MINI II
Power bank
Operation manual
Brugermanual
Handleiding
Manual de instrucciones
Bedienungshandbuch
Manuale operativo
Manual d’utilisation
󰃾󳅩󰮃

2
SAFETY AND MAINTENANCE INSTRUCTIONS
SIKKERHEDS- OG VEDLIGEHOLDELSESINSTRUKTIONER
VEILIGHEIDS- EN ONDERHOUDSINSTRUCTIES
CONSIGNES DE SECURITE ET D’ENTRETIEN
SICHERHEITS- UND WARTUNGSANLEITUNG
ISTRUZIONI DI DICUREZZA E MANUTENZIONE
INSTRUCCIONES DE SEGURIDAD Y MANTENIMIENTO
󰃾󳅩󰮃
10
17
24
31
38
45
52
59

3
This product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at:
www.kreafunk.com/declaration-of-conformity/

4
OVERVIEW/OVERSIGT/OVERZICHT/
VUE D’ENSEMBLE/ÜBERBLICK/PANORAMICA/
VISIÓN GENERAL/󰻷󲼷
5V/2A
USB 5V/2A USB-C

5
ON/OFF/TÆND SLUK/AAN UIT/ALLUMÉ ÉTEINT/
AN AUS/ACCESO SPENTO/ENCENDIDO APAGADO/󰑵
ON OFF OFF
USB-C 5V/2A USB-C 5V/2A
0:15 0:10

6
CHARGING/OPLADNING/OPLADEN/MISE EN
CHARGE/LADEN/CARICA/CARGA/󱪪
5V/2A
Flashing
RedUSB-C

7
BATTERY STATUS/BATTERISTATUS/ BATTERIJ
STATUS/ÉTAT DE LA BATTERIE/BATTERIESTATUS/STATO
DELLA BATTERIA/ESTADO DE LA BATERÍA/󱪪󱇕󱠫󰕶
Flashing
Blue
Blue

8
USE/BRUG/GEBRUIK/UTILISER/BENUTZEN/USO/
USAR/󱪝
USB 5V/2A

9
TECHNICAL SPECIFICATIONS/TEKNISKE
SPECIFIKATIONER/TECHNISCHE SPECIFICATIES/
SPÉCIFICATIONS TECHNIQUES/TECHNISCHE
SPEZIFIKATIONEN/ SPECIFICHE TECNICHE/
ESPECIFICACIONES TÉCNICAS/󰟵󰲤󲼹󰶱
• Dimensions: 85*46*26 mm
• Weight: 68g
• Charging time: 2-3 hours
• Including USB to USB-C charging cable
• Build in Lithium battery with 3000mAh
• Suitable for smartphones, tablets and other
electronic devices.
• Input power: 5V / 2A - Output power: 5V / 2A

10
SAFETY AND MAINTENANCE
INSTRUCTIONS
1. Please read this operation manual carefully before
use.
2. The safety and maintenance instructions in this
operation manual should be retained for future
reference and must be followed at all times.
3. Keep the product away from heat sources such as
radiators, heaters or other appliances that produce
heat.
4. Place the product in a stable position to avoid fall and
cause damage or personal injury.