Kriss Sport Catch The Light User manual

REDEMPTION
MULTIPLAYER
VIDEO
CLASSIC
Made in Europe by
King of Boxers
User Guide
SPEED & REFLEX

Thank you for choosing our product!
Our machines are fully computerized coin-operated skill or strength testers used for amusement and
entertainment. You can use them in bars, pubs, amusement parks and other places of entertainment.
We made sure that all the components used for production as well as the machine itself are made of
best quality components and are safe for use.
Your machine is designed so that you can start using it right away.
WELCOME
1

BE SURE TO READ THE FOLLOWING
Warning: Always turn OFF power an unplug the game before opening or replacing any parts.
Warning: Always when unplugging the machine from electrical outlet, grasp the plug, not the cord.
Warning: Always connect the machine to grounded electrical outlet.
Caution: The wiring system is under voltage that is safe in normal use but may be harmful while
improper use.
Caution: Always use digital multimeter, logic tester or oscilloscope for testing integrated circuits.
Caution: Do not connect or disconnect any of the integrated circuits while the machine is ON.
Caution: Do not install any fuse that does not meet the specified rating.
Caution: Do not subject the machine to extreme temperature variations.
SAFETY PRECAUTIONS
2

What’s in the package
Machine is supplied with a full range of accessories to help you get started right away.
• Key set for 2 locks.
• Preinstalled SD card.
• Wooden safety bar (stored inside the machine).
MACHINE DESCRIPTION AND TECHNICAL SPECIFICATION
3

General information
Game type: speed/reflex meter
Allocation: indoor
Construction: steel
Color: white
Operating dimensions and weight
Width: 127cm / 50 inches
Depth: 79cm / 31 inches
Height: 24cm / 10 inches
Weight: 50kg / 110 lbs
Electrical and operating requirements
Power: 90V - 250V
Current frequency: 50Hz - 60Hz
Average power consumption: 30W
Optional extensions
•Two ticket dispensers.
Casing and glass
Casing: steel.
Glass: tempered glass, 6 mm / ¼inch thick.
Display
Segment display: red & blue score, credit and best score display with 88 flashing points.
Time display: 24 LED points.
4

Software regulated features
•Volume.
•Ticket dispenser settings.
•Free-play mode.
•Button lit time.
•Lit buttons limit.
•Default settings recovery.
Notice: See full description of software regulated features in the Settings section.
Operation modes
1. OFF
2. Normal operation mode
a. Standby
b. Waiting for START
c. Game
3. Settings
4. Software update
5

The machine is designed so that you can set it up quickly and start using it right away.
Installation
1. Take the machine to desired location.
Warning: Do not install the machine in areas that would present an obstacle in case of an emergency.
Caution: To move the machine for transport, use a forklift and take care not to hit the package. Do not
stack any objects on top of the machine, as this may cause damage.
2. Take the machine out of the shipping box.
Notice: Make sure that the machine stands securely on the surface.
Caution: Always use safety bar when working with open machine.
4. If the machine is cold, open machine and wait about 30 minutes for the electronics to warm up.
INSTALLATION AND MAINTENANCE
6

5. Connect the power cord to power outlet and check if machine is working.
Volume adjustment
1. Turn ON the machine and wait for normal operation mode.
2. Open machine and locate main board.
3. Use UP to navigate to position VPL in settings menu.
4. Press ENT and use UP and DOWN buttons to adjust volume value.
5. After adjusting press ENT to confirm new setting.
6. Press ESC to go back to normal operation mode.
Cleaning
Use paper towels and window cleaner to clean the machine.
Do not apply window cleaner or any other liquid directly on the machine. Instead apply it on the paper
towel.
Caution: Machine works under high voltage. Always turn machine OFF before cleaning.
7

1. Press START button and wait for the buttons to illuminate.
2. Press lit buttons until time runs out.
3. Watch your score on the display.
4. Collect your tickets.
Notice: ticket dispensers are optional.
HOW TO PLAY
8

How to access and browse through settings menu
1. Turn ON the machine and wait for normal operation mode.
Notice: Find out more about machine operation modes in Machine description and technical
specification section.
2. Open machine and locate main board.
Caution: Machine works under high voltage.
3. Press UP to enter settings menu. Use UP and DOWN to browse the menu.
4. Use ENT to enable value changing mode. Use UP and DOWN to adjust value. When done us ENT
to save changed value.
Notice: You can also use lit buttons at the top of the machine.
SETTINGS
9

Settings description
Description
02
04
21
CAC
23
PL1
24
PL2
25
PL3
26
PL4
41
VPL
43
LoD
44
NoL
45
GAT
46
FrE
61
tDt
62
T|1
63
T|0
64
PT1
65
nT1
66
PT2
67
nT2
68
PT3
69
nT3
70
PT4
71
nT4
81
CrE
82
dFL
Game counter
Dispensed tickets counter
n/a
n/a
n/a
n/a
n/a
Machine volume
Button lit time
Lit buttons at one time limit
Game time in seconds
Free play mode
Ticket dispenser mode (continuous /pulse)
Tickets for winner *
Tickets for loser *
Extra tickets - first stage point threshold **
Extra tickets - first stage ticket quantity **
Extra tickets - second stage point threshold **
Extra tickets - second stage ticket quantity **
Extra tickets - third stage point threshold **
Extra tickets - third stage ticket quantity **
Extra tickets - fourth stage point threshold **
Extra tickets - fourth stage ticket quantity **
n/a
Restore default settings
* - Set ticket quantity that winner and loser will get when the game is over.
** - Set point threshold and ticket quantity to reward players for reaching high scores.
10

DOWN
UP
ESC ENT
Blue side Red side UP
DOWN
ENT ESC
START
How to exit settings and apply changes
All values are stored immediately after making any changes. You don’t have to reboot the machine in
order to apply changes.
Browse through the menu using UP and DOWN buttons. To exit the menu press ESC or restart the
machine.
How to read counters
Counters can display large numbers (up to 6 digits) and are using both scores displays. For example:
when reading games counter, you’ll see:
•002 on the left display
•491 on the right display
It means that the machine was played 2.491 times. Number on the credit display is just an order
number of this settings menu position and it’s not relevant to the counter value.
11

Button switch
Button switch
Button switch
LED +12V
LED GND
ELECTRONICS DESCRIPTION
12

Main board general description
Blue button LED (+12V)
Blue button LED (GND)
Blue button switch
Blue button switch
Red button LED (+12V)
Red button LED (GND)
Red button switch
Red button switch
Red player speaker signal
Both speakers ground
Blue player speaker signal
Power in (+12V)
Power in (GND)
Blue player ticket disp. signal
Red player ticket disp. signal
Start button (+12V)
Start button (GND)
Start button switch
Start button switch
Red player ticket disp. feedback
Blue player ticket disp. feedback
Buttons and displays
10 12 16
13
11 17
15
14
18
S 7 3 1
4
2
6
8
9
5
Scores and credits
Time
Time
13

Card replacement
1. Turn OFF the machine, open it and locate SD card on the main board.
2. Press the card and it will pop out of socket.
3. Insert new card securely.
4. Close the machine and turn it on.
SD card software update
1. Turn ON the machine and check current software version on the credit display. Version number is
displayed only when machine is initializing.
2. Turn OFF the machine, open it and locate SD card on the main board.
SD CARD REPLACEMENT AND SOFTWARE UPDATE
14

3. Press the card and it will pop out of socket.
4. Connect the card to your computer using a card reader.
Warning: Do not use Mac OS X. Macintosh operating system creates hidden indexing files an all
connected drives. Those files can corrupt the main board.
Notice: Make sure that your card reader is high quality and the USB cable can power the reader.
Some low-quality card readers need additional power supply to work correctly.
5. Check if on the SD card is an old .hex file. If so remove it and empty the trash.
6. Place new .hex file on the card.
Notice: You can request .hex file from Kriss-Sport Support.
7. Use your operating system hardware removal tool to safely remove the SD card from the reader.
8. Put the SD card back in the socket on the main board.
9. Turn on the machine and wait for the update procedure to complete.
Notice: While updating first you’ll see „BOOT” message on the display, next „ENDBOO”, and finally
„INIT”. After that machine will start normally.
15

Machine won’t turn on
1. Check if power outlet is working correctly.
2. Check if power supply inside the machine is working (green LED should be on)
3. Check if power in connector is connected correctly to the main board.
No sound
1. Check if volume setting is not set to 0.
2. Check if speakers are connected correctly to the main board and connectors are connected
securely to each speaker.
3. Check if SD card is plugged in correctly.
TROUBLESHOOTING
16

4. Check if files on the SD card are in top directory and have correct names (game_sta.mp3,
game1.mp3 - game5.mp3, winner.mp3).
Support videos
For technical support videos please visit our YouTube channel. You’ll find there our most recent guide
as well as older step-by-step tutorials.
17

SUPPORT AND CONTACT INFORMATION
18
World wide
Kriss-Sport
Rybnicka Street No. 34
Żory (ZIP: 44-240), POLAND
Office:
fax: [phone]
mail: [email protected]
Manager: Łukasz Bohosiewicz
phone: [phone]
skype: lukasz_bohosiewicz
mail: [email protected]
Technical support: Krystian Stanik
phone: [phone]
skype: kriss-sport-support
mail: [email protected]

1. Kriss-Sport warrants that the machine will be free from defects in electronics (main board, power
supply, wiring) and casing for a period of one year from the date of sale.
2. Buttons, button switches Yenox ticket dispenser is covered with 3 months limited warranty.$
Entropy ticket dispenser is covered with 1 year limited producer warranty.
3. Warranty terms do not cover parts not included above.
4. Defect definition regarding casing: it will be considered as defective if un-welding or breaking takes
place during warranty period. It does not include scratching or rubbing out of any metal part which
results from heavy usage of the machine.
5. Defect definition regarding electronics: it will be considered as defective if any connection between
subcomponents on a particular board fails or any of them stops working itself. It does not include
damages which occurred due to misuse, unauthorized connection or modifications.
WARRANT Y TERMS
19