KROHNE OPTIBAR 5060 eDP Wiring diagram

Pressure transmitter
Category
ATEX: II 1G, 1/2G, 2G Ex ia IIC T6...T1 Ga, Ga/Gb, Gb
IECEx: Ex ia IIC T6...T1 Ga, Ga/Gb, Gb
OPTIBAR 5060 Supplementary Instructions
© KROHNE 04/2021 - 4003591803 - AD OPTIBAR 5060 Exia R03 en

CONTENTS
2 www.krohne.com 04/2021 - 4003591803 - AD OPTIBAR 5060 Exia R03 en
OPTIBAR 5060
1 Safety instructions 3
1.1 General notes ................................................................................................................... 3
1.2 EU conformity................................................................................................................... 3
1.3 Approval according to the IECEx scheme ........................................................................ 4
1.4 Safety instructions............................................................................................................ 4
2 Device description 5
2.1 Description of device ........................................................................................................ 5
2.2 Marking............................................................................................................................. 5
2.2.1 Marking for ATEX .................................................................................................................... 5
2.2.2 IECEx marking......................................................................................................................... 6
2.3 Flammable products ........................................................................................................ 7
2.4 Equipment category ......................................................................................................... 7
2.5 Protection types................................................................................................................ 8
2.6 Ambient temperature / temperature classes.................................................................. 9
2.6.1 Temperature derating........................................................................................................... 11
2.7 Electrical data................................................................................................................. 13
2.7.1 With electronics Z (4…20 mA), H (4…20 mA/HART®), A (4…20 mA/HART® with SIL
qualification) ................................................................................................................................... 13
2.7.2 With electronics P (Profibus PA), F (Foundation Fieldbus).................................................. 16
2.7.3 With electronics S or T for electronic differential pressure measurement........................ 20
2.7.4 With electronics H (4…20 mA/HART®) or A (4…20 mA/HART® with SIL qualification)
and additional electronics Z (second current output).................................................................... 21
2.7.5 With separate cable outlet.................................................................................................... 22
3 Installation 23
3.1 Installation...................................................................................................................... 23
4 Special conditions 24
4.1 Protection against static electricity ............................................................................... 24
4.2 Use of an overvoltage arrester....................................................................................... 24
4.3 Grounding ....................................................................................................................... 24
4.4 Impact and friction sparks ............................................................................................. 24
4.5 Material resistance......................................................................................................... 24
4.6 Mounting / setup............................................................................................................. 25
4.7 Setup with remote housing ............................................................................................ 25
5 Notes 26

SAFETY INSTRUCTIONS 1
3
OPTIBAR 5060
www.krohne.com04/2021 - 4003591803 - AD OPTIBAR 5060 Exia R03 en
1.1 General notes
These safety instructions are valid for the pressure transmitter OPTIBAR * 5060
VGK5/6/D*A/W/V C/U/0/H/T with integrated electronics type Z (4…20 mA), H (4…20 mA/HART®),
A (4…20 mA/HART® with SIL qualification), P (Profibus PA), F (Foundation Fieldbus), S, T
(electronic differential pressure measurement) without additional electronics (X) and OPTIBAR *
5060 VGK5/6/D*A/W/V C/U/0/H/T with integrated electronics type H (4…20 mA/HART®), A (4…20
mA/HART® with SIL qualification), with additional electronics (Z) according to the EU type
examination certificate TUEV 20 ATEX 277368 X.
The pressure-based measuring devices OPTIBAR * 5060 VGK5/6/D*A/W/V C/U/0/H/T are also
used for pressure and level measurement in hazardous areas.
The measured products can also be combustible liquids, gases, mist or vapours.
The OPTIBAR * 5060 VGK5/6/D*A/W/V C/U/0/H/T consist of an electronics housing with
integrated electronic insert, a process connection element, a probe and the pressure measuring
cell with optionally connected diaphragm seal. As an option, the display and adjustment module
can also be integrated.
The OPTIBAR * 5060 VGK5/6/D*A/W/V C/U/0/H/T are suitable for use in hazardous atmospheres
of all combustible materials of explosion group IIA, IIB and IIC for applications requiring
equipment category 1G, 1/2G or 2G.
If the OPTIBAR * 5060 VGK5/6/D*A/W/V C/U/0/H/T are installed and operated in hazardous
areas, the general installation conditions for explosion protection EN 60079-14 and these safety
instructions must be observed.
1.2 EU conformity
The manufacturer declares with the EU declaration of conformity on his own responsibility
conformity with the protection goals of directive 2014/34/EU according to EN IEC 60079-0,
EN 60079-11 and EN 60079-26 for use in hazardous areas with gas.
The EU declaration of conformity is based on the EU type examination certificate:
The "X" after the certificate number refers to special conditions for safe use of the device, which
have been listed in these instructions.
If needed the EU type examination certificate can be downloaded from the manufacturer's
website.
TÜV 20 ATEX 277368 X

1 SAFETY INSTRUCTIONS
4
OPTIBAR 5060
www.krohne.com 04/2021 - 4003591803 - AD OPTIBAR 5060 Exia R03 en
1.3 Approval according to the IECEx scheme
Conformity with IECEx standards was tested in accordance with the "IECEx Certification Scheme
for Explosive Atmospheres" according to IEC 60079-0, IEC 60079-11 and IEC 60079-26.
The number of the IEC certificate is:
The "X" after the certificate number refers to special conditions for safe use of the device, which
have been listed in these instructions.
If needed the IEC certificate can be downloaded from the manufacturer's website.
1.4 Safety instructions
Assembly, installation, start-up and maintenance may only be performed by personnel trained in
explosion protection!
IECEx TUN 20.0017 X
CAUTION!
The operator or his agent is responsible for observing any additional standards, directives or
laws if required due to operating conditions or place of installation.

DEVICE DESCRIPTION 2
5
OPTIBAR 5060
www.krohne.com04/2021 - 4003591803 - AD OPTIBAR 5060 Exia R03 en
2.1 Description of device
The pressure transmitter of the OPTIBAR 5060 series is designed to measure the pressure of
vaporous, gaseous and liquid media.
2.2 Marking
2.2.1 Marking for ATEX
The marking of the entire device is on the housing, where the following identification plate can be
found.
Figure 2-1: Example for an ATEX nameplate for an OPTIBAR 5060
1 Observe the instructions
2 Marking of notified body and CE marking
3 Hardware version
4 Product name and type code
5 Permissible temperature range
6 Nominal range
Permissible process pressure
7 Electronics power supply and signal output
8 Ingress protection and material of wetted parts
(Diaphragm, process connection, sealing and fill fluid)
9 Approvals and approval directive
TMAX: See manual and approval documents
2022
HW Ver 1.0.0
PED SEP