
1. Place your KRUPS “Power
Xpet-t”
blender
on a flat, dry clean surface. Position jar on
the motor base
(see
Assembly
Instructions). Plug into electrical outlet.
2. Add all ingredients to the jar, taking care
not to exceed 40 oz. as indicated remove
on the jar. Remember to add liquid
ingredients first, followed by solid
ingredients. This will result in a more
consistent and thorough blending.
3. Place cover on jar and turn the speed dial
fe)
to the desired speed. Turn on the unit
by pressing the “ON/OFF” button. If you
wish to add ingredients while blending,
remove the measuring cup from the cover
and pour liquid or food through the
feeder hole.
4. When blending is complete, press the
“ON/OFF“ button and unplug. Wait until
the motor unit has stopped and the
blades are not in motion before removing
jar. To remove jar, simply twist in a
clockwise motion until it unlocks, then lift
off of motor base
(see
diagram 2).
n
To ensure that the desired consistency of
your mixture is achieved, we recommend
using the “PULSE” button
Ih).
To operate,
leave the machine in the “OFF” position.
Turn the speed dial to the desired speed,
then press the “PULSE” button to begin
operation. The blender will operate while
the “PULSE” button is engaged. As soon
as the button is released, the appliance
will stop.
n
To add a surge of power to your blending,
press the “POWER BURST” button
(g)
while the machine is in operation and
hold. To stop, simply release the button;
blending will return to the original speed.
The “POWER BURST” feature can
effectively be used on any speed.
m
To crush ice, put ice cubes into the jar.
Cover, then press the “ICE CRUSHING”
button
(f),
using a pulsing motion (press
and release the button repeatedly).
Note:
When crushing ice, we recommend
locking the cover in position. This will
prevent the ice from loosening the cover
during operation.
n
The adjustable speed dial enables you to
start at any speed, then adjust the speed
setting as desired.
n
When mixing solid ingredients, cut into
l-inch pieces prior to blending.
n
Always pour liquids into the jar before
adding solid ingredients.
n
To add ingredients while you are already
in the process of mixing, remove the
measuring cup from the cover and pour
ingredients through the feeder hole.
n
Never pour boiling liquid into the jar.
n
Never allow the blender to operate when
the blender jar is empty, or filled with
solid ingredients only.
n
Do not allow the blender to operate for
more than 3 minutes at a time. After three
minutes, turn the machine off and allow
the motor to rest for several minutes.
n
When crushing ice, add ice cubes
gradually
-
4 or 5 to start, then drop one at
a time through the cover.
H
When preparing frozen drinks, use a
pulsing motion to help ensure that ice is
evenly crushed.
n
If ingredients should stick to the walls of
jar while blending, stop mixing and
remove the jar from the motor base.
Using a spatula, push food down toward
the blade. Place the jar, with cover, back
on the motor base and resume blending.
Never
place hands or fingers in jar or near
the blade assembly.
l
With use, the blender jar may become
discoloured by certain foods (such as
carrots, oranges, etc.) To remove stains,
apply a small amount of vegetable oil to a
cloth, gently rub jar, then wash.
9