KT&C KPC DH100 User manual

Thank you for choosing our high quality camera.
Before attempting to connect or operate, please read and follow
these instructions.
HIGH RESOLUTION
DOME CAMERA
OPERATION MANUAL
M088-DH100-001

1. CAUTIONS ...................... 3
2. FEATURES ...................... 5
3. COMPONENTS ...................... 7
4. NAME AND FUNCTION ...................... 8
5. PART NAME ...................... 9
6. INSTALLATION .................... 10
7. DIMENSIONS .................... 11
8. SPECIFICATION .................... 12
9. OSD MANUAL .................... 13
- GENERAL STRUCTURE .................... 13
- OSD FUNCTION DESCRIPTION ........ 18
3
CONTENTS

4
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note -
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.”
WARNING -
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Caution -
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
1. A regulated DC12V 1A power supply is recommended for use with this camera
for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be
out of subject.
2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level.
If your monitor is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal
components. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light, which may
cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
1.CAUTIONS

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicate that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes purchased this
product, or their local government ofce, for details of where and how they can
take item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for disposal.
1.CAUTIONS
5

• 1/3" 410K/470K Sony Super-HAD CCDⅡ
Minimum illumination
- Standard type: 0.00001 Lux(F1.6, 30 IRE, Sense-Up X256, AGC high)
- LED type: 0 Lux ( IR LED On) S/N Ratio 50 dB
• High Resolution 600TV Lines
• 3D DNR (3D Digital Noise Reduction)
• True Day&Night
• Privacy Mask Function
• OSD (On Screen Display)
• 3-Axis Gimbal
OPTION
• AC24V / DC12V Dual Voltage
2.FEATURES
6

• 3-Axis Gimbal
The Service Video Connector also provides
the installer with an easy way of configuring
the camera.
• Service Video connector
2. FEATURES
7

1 DOME CAMERA
2 VIDEO OUTPUT TEST CABLE
3 OPERATION MANUAL
4 SCREW - 3ea
5 MOUNT GUIDE
8
3. COMPONENTS

• Name (LED Type)
• Name (Standard)
4. NAME AND FUNCTION
9
Function Setup Switch
Service Video Connector
Photo Cell
IR LED 30ea
Function Setup Switch
Service Video Connector

NO PART NAME
STANDARD Type LED Type
1Mount Guide
2Housing Bottom
3Holder Panning
4Holder Tlit
5Holder Rotate
6Cover Sun Shield Cover LED
7Housing Top
8Cover, Dome
5. PART NAME
10

BNC FEMALE
VIDEO
VIDEO IN
DC 12V POWER SUPPLY
BNC FEMALE
VIDEO
VIDEO IN
DC 12V / AC 24V
DUAL POWER SUPPLY
When you install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity problems.
• DUAL(DC12V/AC24V)
• DC12V
6. INSTALLATION
11
• MONITOR CONNECTION

Ø136.4
45
95.3
Ø100
Unit : mm
7. DIMENSIONS
12

8. SPECIFICATION
13
STANDARD TYPE
Signal Format NTSC PAL
Image Device 1/3" Sony Super HAD CCDⅡ
Scanning System 2:1 Interlace
Scanning Frequency H:15.734KHz, V:59.94Hz H:15.625KHz, V:50Hz
Total Pixels 811(H) x 508(V) 795(H) x 596(V)
Effective Pixels 768(H) x 494(V) 752(H) x 582(V)
Electronic Shutter Speed 1/60 sec 1/50 sec
H.Resolution 600TV Lines
Min. Illumination 0.00001 Lux / F1.2 ( Sense-up )
S/N Ratio More than 50dB(AGC Off)
Sync System Internal
Gamma r=0.05 ~1.0 Adjustable / USER
Manual Shutter 1/60(50), FLK, 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K
X2, X4, X8, X16, X32, X64, X128, X256
Sense-up Off / Auto (X2, X4, X8, X16, X32, X64, X128, X256)
AGC Off / Low / Middle / High
BLC Off / BLC / HSBLC
Wh ite Ba la n ce ATW / PUSH / PUSH-LOCK / MANUAL / INDOOR / OUTDOOR
Day&Night True Day & Night With ICR Mechanism
Motion Detection Zone 4ea(Mask On / Off)
Privacy Zone Zone 8ea(Mask On / Off)
3-DNR Off / On(0~100 Level Adjustable)
D-WDR Off / Indoor / Outdoor
Image Freeze / Mirror / D-zoom / Sharpness / Color gain / Gamma / NEG.Image
OSD Available
Language Standard: English, French, Russian,German, Spanish, Dutch
Option1: English, Chinese / Option2: English, Japanese
Video Output 1.0 Vp-p Composite 75(Ω) unbalanced
Power
Consumption
DC12V DC 12V (±10%) Max 170mA
Dual DC 12V (±10%) 210mA, AC 24V (±10%) 2.9W
Operating Temperature 14˚F~122˚F(-10˚C ~ +50˚C)
Storage Temperature -4˚F~140˚F(-20˚C ~ +60˚C)
Operating Humidity 10% ~80%
Options Dual Power
Weight 343g
LED TYPE
Power
Consumption
DC12V DC 12V (±10%) Max 440mA
Dual DC 12V (±10%) 550mA / AC 24V (±10%) 6.3W
Min. Illumination 0 Lux (IR LED ON)
IR LED 850nm, 30ea, Up to 30 m
IR LED Operation On : 1 Lux, Off : 3 Lux

9. OSD MANUAL
14
SETUP MENU
LENS •BRIGHTNESS •RETURN
EXPOSURE •SHUTTER •BRIGHTNESS •AGC
•SENSE-UP •BLC •D-WDR
•RETURN
WHITE BAL •ATW •PUSH •PUSH-LOCK
•MANUAL •INDOOR •OUTDOOR
DAY&NIGHT •COLOR •B/W •AUTO
IMAGE •FREEZE •MIRROR •D-ZOOM
•SHARPNESS •COLOR GAIN
•GAMMA •NEG.IMAGE •RETURN
3DNR •LEVEL •RETURN
SPECIAL •CAM TITLE •LANGUAGE
•MOTION •PRIVACY •SYNC
•RETURN
RESET
EXIT
• GENERAL STRUCTURE
OSD STRUCTURE
• UP,DOWN : Menu up / down
• LEFT,RIGHT : Set-up Key
• MENU : MENU(SELECTION KEY)
LEFT
UP
RIGHT
DOWN
MENU

9. OSD MANUAL
15
LENS MENU STRUCTURE
EXPOSURE MENU STRUCTURE
LENS →DC →BRIGHT →1~100
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
↕
IMAGE
↕
3DNR
↕
SPECIAL
↕
RESET
↕
EXIT
LENS SHUTTER →X256 ~1/100K
↕ ↕
EXPOSURE →AGC →LOW, MIDDLE, HIGH
↕ ↕
WHITE BAL SENSE-UP →X2 ~ X256
↕ ↕ GAIN, LEFT/RIGHT, WIDTH,
TOP/BOTTOM, HEIGNT
DAY NIGHT BLC →BLC →
↕ ↕
IMAGE ↕HSBLC →LEVEL, LEFT/RIGHT, WIDTH,
TOP/BOTTOM, HEIGNT
↕
3DNR D-WDR →INDOOR, OUTDOOR
↕
SPECIAL
↕
RESET
↕
EXIT

9. OSD MANUAL
16
WHITE BALANCE MENU STRUCTURE
DAY & NIGHT MENU STRUCTURE
LENS
↕
EXPOSURE
↕
WHITE BAL →ATW
↕ ↕
DAY NIGHT PUSH
↕ ↕
IMAGE P-LOCK
↕ ↕
3DNR MANUAL →BLUE 1~ 100
↕ ↕ ↕
SPECIAL INDOOR RED 1~ 100
↕ ↕
RESET OUTDOOR
↕
EXIT
LENS
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT →AUTO
↕ ↕
IMAGE B/W →BURST →ON / OFF
↕ ↕
3DNR COLOR
↕
SPECIAL
↕
RESET
↕
EXIT

9. OSD MANUAL
17
IMAGE MENU STRUCTURE
3DNR MENU STRUCTURE
LENS FREEZE →ON/OFF
↕ ↕
EXPOSURE MIRROR →MIRROR ↔V-FLIP ↔ROATE
↕ ↕
WHITE BAL D-ZOOM →x1 ~ x32 ↔PAN -100~100 ↔TILT -100~100
↕ ↕
DAY NIGHT SHARPNESS →0 ~ 31
↕ ↕
IMAGE →COLOR GAIN →BLUE 1 ~100 ↔RED 1 ~100
↕ ↕
3DNR GAMMA →0.05~1
↕ ↕
SPECIAL NEG.IMAGE →ON/OFF
↕
RESET
↕
EXIT
LENS
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
↕
IMAGE
↕
3DNR →ON →LEVEL →1~100
↕
SPECIAL
↕
RESET
↕
EXIT

9. OSD MANUAL
18
SPECIAL MENU STRUCTURE
LENS
↕
EXPOSURE
↕
WHITE BAL CAM TITLE →ON / OFF ↔POSITION CONTROL
↕
↕
DAY NIGHT LANGUAGE →ENGLISH ↔FRANÇAIS ↔РУССКИЙ ↔ESPAÑOL ↔DEUTSCH
↕
IMAGE ON /
OFF
AREA
SEL
AREA
DISPLAY
LEFT/
RIGHT WIDTH TOP / BOTTOM
↕MOTION → ↔ ↔ ↔ ↔ ↔
3DNR ↕
↕
AREA1~4 ON/OFF MOTION
VIEW ↔SENSITIVITY ↔HEIGHT
SPECIAL →PRIVACY →AREASEL ↔AREADISPLAY ↔LEFT/RIGHT ↔WIDTH ↔TOP/BOTTOM
↕ ↓ ↓ ↕
RESET AREA1~8 ON/OFF COLOR ↔HEIGHT
↕
EXIT SYNC →INT
RESET MENU STRUCTURE
LENS
↕
EXPOSURE
↕
WHITE BAL
↕
DAY NIGHT
↕
IMAGE
↕
3DNR
↕
SPECIAL
↕
RESET →FACTORY RESET
↕
EXIT

9. OSD MANUAL
19
• OSD FUNCTION DESCRIPTION
1.LENS
- LEVEL DC
BRIGHTNESS : Enable user to select the DC level for Brightness of image(1~100).
2. EXPOSURE
: Enable user to set up the function of SHUTTER, AGC.
- SHUTTER
• FLK : Enable user to set up the FLICKERLESS.(NTSC: 1/100, PAL: 1/120).
• FIXED : Enable user to set up the Shutter Speed.
> 1/60(50), 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K.
* ( ) is for PAL TYPE.
- BRIGHTNESS : Enable user to set up the MANUAL electronic Shutter value.
- AGC : Enable user to make imager bright to amplify the Gain.
- SENSE-UP : Low-speed shutter control.
- BLC : The Function of Back Light Compensation.
• HSBLC : Highlight Suppression BLC will darken image portions for clearer images.
- D-WDR : allows every detail to be captured accurately
even if one portion is bright while other portions are dark.
LENS
BRIGHT 50
RETURN RET┛
EXPOSURE
SHUTTER 1/60
BRIGHTNESS 50
AGC OFF
SENSE-UP AUTO
BLC BLC┛
D-WDR OFF
RETURN RET┛

9. OSD MANUAL
20
3. WHITE BALANCE
: Enable user to represent the accurate white color by controlling the R.G.B level.
• ATW : Enable user to trace the White Balance automatically in the Wide range
(2,500K ~ 9,500K).
• PUSH : Enable user to trace the White Balance automatically in all the range.
• P-LOCK : Enable user to set up automatically readjusted only at the request of the user.
• MANUAL : Enable user to set the RED GAIN or BLUE GAIN.
• INDOOR : Enable user to set up 3,200K base mode.
• OUTDOOR : Enable user to set up 5,400K base mode.
4. DAY&NIGHT
: Conversion of output image COLOR/BW depending on exterior environment.
- AUTO : Enable user to change DAY&NIGHT mode automatically.
- B/W : Enable user to x the output image in B/W.
• BURST ON/OFF : Select the burst signal ON/OFF
when Night condition.
- COLOR : Enable user to x the output image in COLOR.
WHITE BAL MANUAL
BLUE 24
RED 32
RETURN RET┛

9. OSD MANUAL
21
5. IMAGE
:Setting up the FREEZE, MIRROR, D-ZOOM, SHARPNESS, COLOR GAIN,
GAMMA, NEGATIVE IMAGE.
- FREEZE : Setting of moving images in freeze-frame mode.
- MIRROR
• MIRROR : Enable user to set up reversed LEFT and RIGHT image.
• V-FLIP : Enable user to set up vertically ipped video.
• ROTATION : Enable user to set up 180-degree rotation lp function.
- D-ZOOM : Enable user to expand one part of the monitor screen for viewing.
- SHARPNESS : Enable user to set up sharpness control.
- COLOR GAIN : Enable user to set the RED GAIN or BLUE GAIN.
- GAMMA : Enable user to set up compensation according to gamma value.
- NEG.IMAGE : Enable user to set up negative image ON/OFF.
6. 3DNR
: Three-dimensional noise reduction.
- LEVEL : Enable user to set up noise reduction level.
IMAGE
FREEZE OFF
MIRROR OFF
D-ZOOM ON┛
SHARPNESS 5
COLOR GAIN ┛
GAMMA 0.45
NEG.IMAGE OFF
RETURN RET┛
3DNR
LEVEL 50
RETURN RET┛