KUSSMAUL 091-137 User manual

BATTERY SAVER FILTER
BATTERY SAVER FILTER
Model 091-137
Model 091-137
BATTERY SAVER
BATTERY SAVER
+
+
-
-
LOAD
LOAD
+
+
-
-
1. The Model 091-137 Battery Saver Filter is designed to filter the full wave rectified,
unfiltered D.C. Output of the Battery Saver. The output is a low ripple 13.8 VDC.
2. Install the filter in a convenient, dry location and wire as illustrated in the diagram
above. Use #18 AWG minimum wire size for wire runs up to 15 feet. Longer
distances require a larger wire size.
3. Note that the maximum current capacity of the filter is 3 amps. For higher currents
use 2 or more filters may be connected in parallel.
IN
IN
OUT
OUT
BATTERY SAVER FILTER
Model 091-137
IN OUT
INSTALLATION INSTRUCTIONS
6 AMPERE
3 ampere
6 ampere load
2 filters in parallel
Typical Installation
Typical Installation
single filter, 3 amp or
less load.
KUSSMAUL ELECTRONICS COMPANY, INC.
170 CHERRY AVENUE, WEST SAYVILLE, NEW YORK, 11796-1221 USA
SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS
TEL. In NY: TOLL FREE: FAX: [phone] 346-0857 631 567-5826
FEB. 7, 2003