KVM-TEC Smartline Dual SVX2 Series User manual
Check out our
Installation Channel:
Smartline Dual SVX2
6502 SET
6501L CPU/LOCAL
6501R CON/REMOTE
USER-MANUAL
SVX2 Smartline Dual
smart connections
2 | kvm-tec
TABLE OF CONTENTS
TABLE OF CONTENTS
1. Introduction 6
1.1 Intended Use 6
1.2 Safety Instructions 7
1.4 Product Elements 10
1.5 About the Status Led 12
2.1 Unpacking and checking the contents 13
2. Installation of the extender 13
2.2 Mounting options 14
2.2.1 Mounting pads and rubber feet 14
2.2.2 Mounting kits (optional) 14
2.3 Installing the extender 15
2.4 Start up 18
2.5 Removing a CATx cable 18
3.2 Status Menu 20
kvm-tec | 3
TABLE OF CONTENTS
3.4.1 Updating with bitmap image 23
3.4.2 Performing an Autoupdate 24
3.4.3 Performing a network update 25
3.5 Unlock an option 26
3.6 Enable or disable the USB Memory upgrade 27
uses 28
3.8 Changing the network settings 28
3.11 Sharing videos 40
4 | kvm-tec
TABLE OF CONTENTS
4.1 Access the Network Settings menu (Masterview and
Network mode 42
4.2 Disconnect or select a workstation from the current
connected devices 43
4.3 Managing user details, rights and groups 45
4.4 Managing remote units 48
4.5 Managing Local Units 50
4.6 Installing Dual-Head or Multi-Head System 52
4.7 Enable user groups and rights and login access 54
4.8 Auto-connect to a free computer after an interruption 55
4.10 Enable the User-PC Binding mode 57
4.11 Enable the disconnect on PC Power Down option 58
4.13 Reconnect on startup 60
4.14 Set the password timeout 61
kvm-tec | 5
TABLE OF CONTENTS
5. Troubleshooting & First Aid 62
6. Requirements for cables 64
6.1 Requirements for CAT5e/6/7 cables 64
7. Requirements Network Switch 65
8. Maintance & Care , Disposal 67
10. Notes 70
6 | kvm-tec
1. INTRODUCTION
Congratulations on the purchase of your new Smartline SVX2 KVM Extender. You have
bought a high quality extender. These instructions are part of this product. They contain
important information regarding safety, use and disposal for every user of the Smartline
SVX2 KVM Extender. Please familiarise yourself with the information within prior to
using your product. Use the product only in the manner as described and for the areas of
application as stated. When passing the product to a third party be sure to also supply all
instructions and other relevant documentation. Following proper use and maintenance,
your Smartline SVX2 KVM Extender will bring you joy for many years to come.
1.1 INTENDED USE
This product is intended to be used as a device to increase the distance that a keyboard,
monitor and mouse can be placed from a computer. This product is intended for professional
use. The product should not be used in potentially explosive environments.
The product may only be used according to the instructions as described in this manual. All
course of technological progress are reserved. In these user instructions the Smartline SVX2
KVM Extender is referred to as ‘product’ or ‘extender‘. The SVX2/PC is referred to as the ‘local
unit / CPU and the SVX1/Monitor is referred to as the ‘remote unit‘/CON.
kvm-tec | 7
1. introduction
1.2 SAFETY INSTRUCTIONS
WARNING! Read and understand all safety instructions.
Please ensure that everyone who uses the product has read and followed these warnings
and instructions.
subsequent users of the product.
by incorrect handling or non-compliance with the safety instructions. In such cases, the
warranty will be voided.
physical, sensory or intellectual capability or lack of experience and/or knowledge, unless
they are supervised by a person who is responsible for their safety or provides them with
instructions on how to use the product.
DANGER! Not for use in potentially explosive environments.
DANGER! Be vigilant at all times, and always take care around this product. Do not use
electrical equipment if you are lacking in concentration or awareness, or are under the
the cables for any damage before use. If there is any visible damage, a strong odour, or
excessive overheating of components unplug all the connections immediately and stop
using the product.
disruptive interference with radio or television reception or affect other electronic
products in residential areas.
Non-compliance invalidates the permission to operate this product.
Do not use other adapters.
indicated on the product.
prevent people from tripping over the cord.
1
8 | kvm-tec
1. introduction
In particular, ensure to avoid damage to the mains adapter.
socket. Make sure the product can be disconnected from the power socket at all times.
DANGER! Never touch the adapter with wet hands.
unused mains adapter in a dry, elevated or locked location away from children.
electronic parts must not be cleaned.
1. introduction
1.3 TECHNICAL SPECIFICATIONS
Type: KVM Extender ( local/CPU unit and remote/CON unit)
Model: Smartline SVX2 KVM Extender
Power supply output: 12V; 1A (external power supply)
Operating temperature range: 0 ºC to 45 ºC / 32 °F to 113 °F
Relative humidity: max. 80% (non-condensing)
Storage humidity: max. 80% (non-condensing)
1
10 | kvm-tec
1. introduction
1.4 PRODUCT ELEMENTS
Local/CPUExtender
Nr. Name Function
1 Monitor Out Connection to Monitor
2 DC Connection for 12 V power supply
3 PC In Connection to PC
4 PC USB USB connection to PC
5 KVM-Link/ RJ45 socket Connection for CAT5/6/7 cable
6 Power/Status LED Displays the status of the extender
7 Monitor out Connection to monitor
8 DC Connection for 12 V power supply
10 PC USB USB connection to PC
12 Power/Status LED Displays the status of the extender
KVM-TEC Smartline
DC PC
In
PC
USB
KVM-Link
Monitor
Out
Local / PC
DC PC
In
PC
USB
KVM-Link
Monitor
Out
25
6
13 4 811
12
7910
kvm-tec | 11
1. introduction
Remote/CON Extender
Nr. Name Function
13 Monitor Out Connection to monitor
14 DC Connection for 12 V power supply
15 USB USB connection (e.g. for keyboard or mouse)
16 KVM-Link/ RJ45 Socket connection for CAT5e/6/7 cable
11 Power/Status LED Displays the status of the extender
18 Monitor Out Connection to monitor
20 USB USB connection (e.g. for keyboard or mouse)
21 KVM Link/ RJ45 socket Connection for CAT5e/6/7 cable
22 Power/Status LED Displays the status of the extender
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
1
12 | kvm-tec
1. introduction
Normal Operation
1.5 ABOUT THE STATUS LED
The Status LED (8/15) can light red, orange or green. Table 1 shows the meaning of each colour.
Also see chapter Troubleshooting.
* MVX only ** Rem. Only
Colour Blinking Physical
Link
Active
Connection
Video
Extended
USB
Initialisation
UBS Data
Received
Identify
Command
Autoupdate
Mode
Red - Yes No No Update Failed
Red Slow No No No
Orange - Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow - No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
Main LED
RJ45 Socket LEDs *
kvm-tec | 13
2. INSTALLATION OF THE EXTENDER
2.1 UNPACKING AND CHECKING
THE CONTENTS
due to transport inform the carrier immediately. Before delivery the product is checked for its
function and its operating safety.
Make sure that the packaging contains the following content:
Local / CPU Unit
1x SVX2 local/CPUextender
1 x Power supply 12V; 1A EU plug or INT.plug
4 x Mounting Pads
Remote/CON Unit
1x SVX2 remote/CON extender
1 x Power supply 12V; 1A EU plug or INT plug
4 x Mounting Pads
2
14 | kvm-tec
2. installation of the extender
2.2 MOUNTING OPTIONS
2.2.1 MOUNTING PADS AND RUBBER FEET
The mounting pads and rubber feet can be used to hold the extenders in place and prevents
them from sliding and falling.
To attach the mounting pads or rubber feet:
1. Remove the protection layer from the mounting pads or rubber feet (G).
2. Attach the mounting pads or rubber feet (G) to the bottom the units.
2.2.2 MOUNTING KITS (OPTIONAL)
The following mounting kits are available:
Rack Mounting Kit RMK-F - Part No. 6130
The rack mounting kit RMK-F is for assembling kvm-tec Smartline SVX and Masterline MVX
Rack Mounting Kit RMK-FN - Part No. 6131
The rack mounting kit RMK-FN is for assembling kvm-tec Smartline SVX and Masterline MVX
Rack Mounting Kit RMK-FRN - Part No. 6132
The rack mounting kit RMK-FRN is used to mount kvm-tec Smartline SVX and Masterline
MVX extenders. It is equipped with rack shelf, faceplate and 2 power supply units, which are
The Under Desk Mounting kit is for underdesk mounting of the SVX and MVX extender.
Din Rail Mounting Kit - Part No. 6136
The DIN rail mounting is used for space-saving installation in control cabinets or on DIN rails.
The attachment to the SVX and MVX extenders is possible in several ways.
kvm-tec | 15
2. installation of the extender
2.3 INSTALLING THE EXTENDER
WARNING! Read and understand all safety information before installing the product.
The units can be set up to access one host computer, or to access numerous host computers.
each user can gain quick access to any of the required computers.
point to point connection
Set up with swtching System up to 48 endpoints
2
16 | kvm-tec
2. INSTALLATION OF THE EXTENDER
1. power plug
12V 1A
4. DVI in
from PC
2. USB to PC
4. DVI out
to Monitor
1. power plug
12-24 VDC
2. USB from
Keyboard and Mouse
KVM-TEC Smartline
DC PC
In
PC
USB
KVM-Link
Monitor
Out
Local / PC
DC PC
In
PC
USB
KVM-Link
Monitor
Out
25
6
13 4 811
12
7910
KVM-TEC Smartline
DC PC
In
PC
USB
KVM-Link
Monitor
Out
Local / PC
DC PC
In
PC
USB
KVM-Link
Monitor
Out
25
6
13 4 811
12
7910
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
3. Network cable CAT 5e/6/7 up to 150m/492ft
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
DC USB USB KVM-Link
Monitor
Out
KVM-TEC Smartline Remote / Mon
DC USB USB KVM-Link
Monitor
Out
Remote / Mon
17
14 1613 15
22
19 2118 20
Keyboard and Mouse
1. power plug
12V 1A
2. USB from
Kayboard and Mouse
2. USB to PC
4. DVI out
to Monitor
4. DVI out
to Monitor
4. DVI out
to Monitor
4. DVI in
from PC
3. Network cable CAT5e/6/7 up to 150m/492ft
kvm-tec | 17
2. installation of the extender
2
Quick Installation SVX2 SMARTLINE local / CPU – remote/ CON
Connect the CON / Remote and the CPU / Local Unit with the included 12V 2A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable
to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with two network cables.
Now connect the HDMI-DVI cable to the DVI socket of the PC and the other end to the HDMI so-
cket of the CPU / Local Unit (PC-in). Then connect the monitor with the HDMI-DVI cable to the CON
/ Remote Unit.
HAVE FUN - your kvm-tec Extender is now in use for many years ( MTBF approx 10 years)
18 | kvm-tec
2. INSTALLATION OF THE EXTENDER
2.5 REMOVING A CATX CABLE
To remove a CATx cable:
3.1 HOW TO ACCESS THE MAIN MENU
Use the monitor and keyboard to get access to the main menu.
To access the main menu:
1. Make sure the extenders, the monitors and the computer are switched on.
2. Press the Scroll Lockmain menu appears
with an overview of the sub-menus.
3. To access a sub-menu press the applicable key.
3. EXTENDER MENU/SETTINGS
3
20 | kvm-tec
3. EXTENDER MENU/SETTINGS
3.2 SYSTEM STATUS
information on the connection itself as well as resolution of the video channel, and USB-status.
Link status shows whether there is a physical connection available. Connection indicates if kvm
data is currently able to be transmitted.
Video and USB show if data is currently being transmitted.
Other manuals for Smartline Dual SVX2 Series
2
This manual suits for next models
7
Table of contents
Other KVM-TEC Extender manuals
KVM-TEC
KVM-TEC USBflex Original operating instructions
KVM-TEC
KVM-TEC masterEASY Operator's manual
KVM-TEC
KVM-TEC USBflex Original operating instructions
KVM-TEC
KVM-TEC ScalableLine User manual
KVM-TEC
KVM-TEC KT-6031L User manual
KVM-TEC
KVM-TEC 4K Ultraline DP 1.2 UVX Operator's manual
KVM-TEC
KVM-TEC MAXflex User manual
KVM-TEC
KVM-TEC Profiline PROVX1 User manual
KVM-TEC
KVM-TEC INDUSTRYLINE MVX1i User manual
KVM-TEC
KVM-TEC Smartline Dual SVX2 Series Operator's manual
KVM-TEC
KVM-TEC SmartLINE SVX User manual
KVM-TEC
KVM-TEC Matrixline MX2000 User manual
KVM-TEC
KVM-TEC Matrixline MX Operator's manual
KVM-TEC
KVM-TEC Masterline MVX User manual
KVM-TEC
KVM-TEC media4Kconnect User manual
KVM-TEC
KVM-TEC Ultraline UVX1 User manual
KVM-TEC
KVM-TEC MAXflex User manual
KVM-TEC
KVM-TEC media4Kconnect DP 1.2 Original operating instructions
KVM-TEC
KVM-TEC EASYLINE masterEasy User manual
KVM-TEC
KVM-TEC Smartline Dual SVX2 Series User manual
Popular Extender manuals by other brands
Ebode
Ebode XDOM PM10C - PRODUCTSHEET user guide
Key Digital
Key Digital KD-X222 operating instructions
Seada
Seada KVM50HD user manual
webtrol
webtrol EZ Series Installation & operating manual
Wilson Electronics
Wilson Electronics weBoost DRIVE X installation guide
Xantech
Xantech 172-94 installation instructions
