KVM-TEC Master Line MVX Series User manual
Check out
our Installation
Channel:
www.kvm-tec.com
line
master
kvm-tec
User
Manual
Masterline MVX
6701 SET
6701L CPU/LOCAL
6701R CON/REMOTE
Masterline ber MVX-F
6801 SET
6801L CPU/LOCAL
6801R CON/REMOTE
connect collaborate communicate control
kvm-tec = C 4
2 | kvm-tec kvm-tec | 3
1. Introduction 6
1.1 Intended Use 6
1.2 Safety Instructions 7
1.4 About your masterline extender 10
1.5 Meaning of LED indicators 12
2. Installation of the extender 13
2.1 Unpacking and checking the contents 13
2.2 Mounting options 14
2.2.1 Mounting pads and rubber feet 14
2.2.2 Mounting kits (optional) 14
2.3 Installing the extender 15
2.4 Startup 20
2.5 Replacing the SFP module 20
2.6 Removing a CATx cable 21
3. Extender menu/settings 23
3.1 Using the On Screen menu 22
3.2 Status menu 23
3.4.1 Update via a bitmap image 26
3.4.3 Performing autoupdate 30
31
3.5 Unlock an upgrade 32
4 | kvm-tec kvm-tec | 5
4. Network Settings 50
devices 52
4.3 Managing user details, rights and groups 54
4.6 set up dual-head or multi-head systems 61
4.7 Enable user groups and rights and login access 63
4.8 Auto-connect to a free computer after an interruption 64
4.12 Hide info display 68
5. Troubleshooting & First Aid 71
6. Requirements for cables 73
6.1 Requirements for CAT5e/6/7 Cables 73
7. Requirements network 74
8. Maintance & Care , Disposal 76
9.Warranty & extended warranty 77
10. Contact address 78
kvm-tec | 7
1. introduction
6 | kvm-tec
Congratulations on the purchase of your new Masterline MVX1/MVX1-F KVM Extender.
You have bought a high quality extender. These instructions are part of this product.
They contain important information regarding safety, use and disposal for every user
of the Masterline MVX1 and MVX1-F KVM Extender. Please familiarise yourself with the
information within prior to using your product. Use the product only in the manner as
described and for the areas of application as stated. When passing the product to a third
party be sure to also supply all instructions and other relevant documentation. Following
proper use and maintenance, your Masterline MVX1/MVX1-F KVM Extender will bring you
joy for many years to come.
1.1 INTENDED USE
is intended for professional use. The product should not be used in potentially explosive
environments.
The product may only be used according to the instructions as described in this manual. All
course of technological progress are reserved. In these user instructions the Masterline
1.2 Safety Instructions
WARNING! Read and understand all safety instructions.
and instructions.
subsequent users of the product.
DANGER!
DANGER!
the cables for any damage before use. If there is any visible damage, a strong odour, or
excessive overheating of components unplug all the connections immediately and stop
using the product.
DANGER!
products in residential areas.
Do not use other adapters.
indicated on the product.
8 | kvm-tec
1. introduction 1. introduction
prevent people from tripping over the cord.
DANGER!
electronic parts must not be cleaned.
1.3 TECHNICAL SPECIFICATIONS
Operating temperature range: 0 ºC to 45 ºC / 32 °F to 113 °F
Relative humidity: max. 80% (non-condensing)
Storage humidity: max. 80% (non-condensing)
Weight: local unit 302g/0.66lbs.
10 | kvm-tec kvm-tec | 11
1. introduction 1. introduction
1.4 ABOUT YOUR MASTERLINE EXTENDER
Local Extender (CPU)
Nr. Name Function
2 in Audio In from PC
3 out Audio Out to PC
Remote Extender (CON)
Nr. Name Function
10 out Audio Out to speakers etc.
6 5 47
1 2 3
8
910 11 12
1314
15
12 | kvm-tec
1. introduction
kvm-tec | 13
Normal Operation
1.5 Meaning of LED indicators
Also see chapter Troubleshooting.
Table 1: Meaning of LED indicators
Colour Blinking Physical
Link
Active
Connection
Video
Extended
USB
Initialisation
UBS Data
Received
Identify
Command
Autoupdate
Mode
Red - Yes Update Failed
Red
Orange - Yes Yes
Orange Fast Update in Progress
-Yes Yes Yes Update Succedded
Yes**
Yes
-
Yes
-Yes
Yes
Main LED
RJ45 Socket LEDs *
2.1 UNPACKING AND CHECKING THE CONTENTS
function and its operating safety.
I 8 x mounting pads
1 x SFP Module Multimode up to 500m/1640 ft.
14 | kvm-tec kvm-tec | 15
2. installation of the extender 2. installation of the extender
2.2 MOUNTING OPTIONS
2.2.1 MOUNTING PADS AND RUBBER FEET
The mounting pads and rubber feet can be used to hold the extenders in place and prevents
them from sliding and falling.
To attach the mounting pads or rubber feet:
1. Remove the protection layer from the mounting pads or rubber feet
2. Attach the mounting pads or rubber feet
2.2.2 MOUNTING KITS (OPTIONAL)
The following mounting kits are available:
2.3 INSTALLING THE EXTENDER
WARNING! Read and understand all safety information before installing the product.
The units can be set up to access one host computer, or to access numerous host computers.
each user can gain quick access to any of the required computers.
point to point connection
16 | kvm-tec kvm-tec | 17
2. installation of the extender 2. installation of the extender
1. Power plug
12V 1A
4. DVI in
from PC
2. USB to PC
4. DVI out
to Monitor
5. Audio
from PC
6. Audio to PC
2. USB from
Keyboard and mouse
6. Audio from
Microphone
5. Audio to
Speaker
3. Network cable CAT5e/6/7 up to 150m/492ft
Quick Installation MVX1 Masterline
local / CPU – remote/ CON
1.
2.
3.
4.
cable.
5.
via the audio cable
6.
HAVE FUN - your kvm-tec Extender is now in use for many years ( MTBF approx 10 years)
1. Power plug
12V 1A
4. DVI out to Monitor
18 | kvm-tec
2. installation of the extender 2. installation of the extender
1. Power plug
12V 1A
fibre
4. DVI in
from PC
2. USB to PC
4. DVI out
to Monitor
5. Audio
from PC
6. Audio to PC
fibre
2. USB from
Keyboard and mouse
3. Duplex Multimode Fiber cable up to 500m/1640 ft
4. DVI to Monitor
5. Audio
to Speaker
6. Audio from
Microphone
Quick Installation MVX1-F FIBER MASTERLINE
1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.
2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable
to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a ber cable.
4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the
CPU / Local Unit (DVI-in). Then connect the monitor to the CON / Remote Unit with a DVI cable.
5. Then connect PC audio out with the audio cable to Local Audio in. Then connect audio / out via the
audio cable
6. Almost done! Now connect the audio cable Local Audio / out to the PC Audio in and Remote Audio
/ out with the audio cable to the microphone
HAVE FUN - your kvm-tec Extender is now in use for many years ( MTBF approx 10 years)
1. Power plug
12V 1A
20 | kvm-tec kvm-tec | 21
2. installation of the extender 2. installation of the extender
2.4 STARTUP
To start up the system without switch:
3. Connect both extender power supplies
applications.
2.5 REPLACING THE SFP MODULE
To replace an SFP module with a different SFP module:
1. Remove the black dust protector from the SFP module.
use SFP modules from kvm-tec, or recommended by kvm-tec.
2.6 REMOVING A CATX CABLE
To remove a CATx cable:
2.7 REMOVING A FIBER CABLE
To remove a ber cable:
22 | kvm-tec
2. installation of the extender
3.1 USING THE ON SCREEN MENU
Use the monitor and keyboard to get access to the main menu.
To access the main menu:
2. Press the Scroll Lockmain menu appears
3. To access a sub-menu press the applicable key.
to select the corresponding letter.
O DDC Option DDC Option Fixed ice position 1020 x 1080
Q Exit Exit
kvm-tec | 23
3.2 STATUS MENU
The enabled options and the current FW-version is displayed in the left top corner.
Connection indicates if kvm
data is currently able to be transmitted.
Video and USB
24 | kvm-tec kvm-tec | 25
3. extender menu/settings 3. extender menu/settings
3.3 DETERMINE THE CURRENT FIRMWARE VERSION
To view the rmware version:
main menu
3.4 PERFORMING A FIRMWARE UPDATE
the update process.
1. update via a bitmap image
2.
3. automatic update
4.
To perform a rmware update:
1. Make sure the main menu is open.
2. Press the Ukey. The Update menu appears.
N
Akey to do an automatic update.
Ukey to do a direct update.
S
Q key to return to the main menu.
26 | kvm-tec kvm-tec | 27
3. extender menu/settings 3. extender menu/settings
3.4.1 UPDATE VIA A BITMAP IMAGE
The le will be output from an image and will be copied and storede to the currently
connected extenders.
Wait until all 3 phases of the update have been completed and make sure that you have
3.4.2 UPDATE WITH USB STICK
For the update of the USb Stick the following steps are necessary:
subdirectory
28 | kvm-tec
3. extender menu/settings 3. extender menu/settings
Wait until all 4 phases have been completed.
30 | kvm-tec kvm-tec | 31
3. extender menu/settings 3. extender menu/settings
3.4.3 PERFORMING AUTOUPDATE
LEDs are then green)
3.4.4 PERFORMING NETWORK UPDATE
The information is then sent to the marked units. During this process the devices can still be in
operation. As soon as all updates have been transmitted, the marked devices can be restarted
32 | kvm-tec kvm-tec | 33
3. extender menu/settings 3. extender menu/settings
3.6 ENABLE OR DISABLE THE USB MEMORY UPGRADE
can enable and disable at any time.
To enable or disable the USB Memory upgrade:
1. Make sure the main menu is open.
2. Press the Mkey. The Options Overview
displayed (Enabled or Disabled).
3. Press 1to enable or 0
by deactivating mass storage devices.
3.5 UNLOCK AN UPGRADE
1. Make sure that the main menu is open. 2.
2. press the M button. The Options Overview menu opens. The device ID
order the unlock code from your supplier
4. press the Mkey to enter the unlock code.
5. enter the unlock code of the supplier.
Options menu.
Overview
The information is then sent to the marked units. During this process the devices can still be in
operation. As soon as all updates have been transmitted, the marked devices can be restarted
34 | kvm-tec kvm-tec | 35
3. extender menu/settings 3. extender menu/settings
3.7 DEFINING WHAT DDC INFORMATION IS USED BY THE PC
To dene what DDC information is used by the PC:
1. Make sure the main menu is open.
2. Press the Okey. The DDC Option menu appears.
0to use the DDC information from the monitor attached to the remote
extender.
2to save the current DDC information. The system uses the same settings after
the extender has been restarted.
4through 8
3. Press ESC to go back to the main menu.
3.8 CHANGING THE NETWORK SETTINGS
3.9 CHANGING THE EXTENDER SETTINGS
The Extender Settings
enabled or disabled by pressing the applicable key.
To access the Extender Settings menu:
1. Make sure the main menu is open.
2. Press the Gkey. The Extender Settings menu appears.
Remote Settings and
Local Settings.
36 | kvm-tec kvm-tec | 37
3. extender menu/settings 3. extender menu/settings
4. To access the local or remote extender settings:
Lkey to access the Local Settings menu.
Rkey to access the Remote Settings menu.
3.9.1 OPTIMIZE THE VGA PREFERENCES
been unlocked (see 3.4).
To optimize the VGA settings:
1. From the Extender Settings menu, press the L key. The Local Settings menu appears.
2. Press the Vkey. The VGA menu appears.
F1 to move the display area up.
F4
F2 to move the display area to the left.
F3 to move the display area to the right.
F5
F6
space to change the rate of the above mentioned setting. This toggles the rate
M
K
Ito reset parameters to default values.
Sto save the settings and exit the menu.
Q
38 | kvm-tec
3. extender menu/settings 3. extender menu/settings
3.9.3 SETTING THE AUDIO VOLUME
The volume of the audio input (microphone) on the remote unit can be changed. The default
unit is disabled.
To set the volume:
1. From the Extender Settings menu, press the Rkey. The Remote Settings menu
appears.
2. Press the Akey. The Audio Input Gain menu appears.
3.9.2 ENABLE OR DISABLE THE USB COMPATIBILITY MODE
To enable/disable the USB compatibility mode:
1. From the Extender Settings menu, press the Lkey. The Local Settings menu appears.
2. Press the U
This manual suits for next models
7
Table of contents
Other KVM-TEC Extender manuals
KVM-TEC
KVM-TEC media4Kconnect 6930 DP1.2 User manual
KVM-TEC
KVM-TEC Profiline PROVX2 User manual
KVM-TEC
KVM-TEC INDUSTRYLINE MVX1i User manual
KVM-TEC
KVM-TEC USBflex Original operating instructions
KVM-TEC
KVM-TEC 6850 User manual
KVM-TEC
KVM-TEC 6940 User manual
KVM-TEC
KVM-TEC 4K Ultraline DP 1.2 UVX Operator's manual
KVM-TEC
KVM-TEC USBflex Original operating instructions
KVM-TEC
KVM-TEC media4Kconnect Instruction sheet
KVM-TEC
KVM-TEC masterEASY User manual
KVM-TEC
KVM-TEC Smartline Dual SVX2 Series Operator's manual
KVM-TEC
KVM-TEC 6701i User manual
KVM-TEC
KVM-TEC Smartline SVX1 User manual
KVM-TEC
KVM-TEC SMARTflex User manual
KVM-TEC
KVM-TEC MASTERflex User manual
KVM-TEC
KVM-TEC smartEASY single SE1 User manual
KVM-TEC
KVM-TEC MATRIXLINE Original operating instructions
KVM-TEC
KVM-TEC Smartline Dual SVX2 Series User manual
KVM-TEC
KVM-TEC masterEASY User manual
KVM-TEC
KVM-TEC Smartline Dual SVX2 Series User manual
