KVM-TEC 6701i User manual

MATRIXLINE FIBER MX-F
6811L CPU/LOCAL
6811R CON/REMOTE
Check out our
Installation Channel:
Industryline
MVX-i
6701i SET
6701iL CPU/LOCAL
6701iR CON/REMOTE
Industryline ber
MVXi-F
6801 SET
6801iL CPU/LOCAL
6801iR CON/REMOTE
USER-MANUAL
Industryline
smart connections line

2 | kvm-tec
TABLE OF CONTENTS
1. Introduction 6
1.1 Intended Use 6
1.2 Safety Instructions 7
1.3 Technical Specications 9
1.4 Product Elements 10
1.5 Meaning of LED indicators 12
2. Installation of the extender 13
2.1 Unpacking and checking the contents 13
2.2 Mounting options 14
2.2.1 Mounting pads and rubber feet 14
2.2.2 Mounting kits (optional) 14
2.3 Installing the extender 15
2.4 Startup 20
2.5 Replacing the SFP module 20
2.6 Removing a CATx cable 21
2.7 Removing a ber cable 21
3.1 How to access the main menu 22
3.2 Status Menu 23
TABLE OF CONTENTS

kvm-tec | 3
3. Extender menu/settings 23
3.3 How determine the current Firmware version 24
3.4 How to perform a rmware update 25
3.4.1 update via a bitmap image 26
3.4-2 update with usb stick 27
3.4.3 Performing autoupdate 30
3.4.4 Performing network update 31
3.5 unlock an upgrade 32
3.6 How to enable or disable the USB memory upgrade 33
3.7 How to dene what DDC information by the PC 34
3.8 How to change the network settings 34
3.9 How to change the extender settings 35
3.9.1 How to optimize VGA preferences 37
3.9.2 How to enable or disable the USB compatibility mode 38
3.9.3 How to set the baud rate for the RS232 39
3.9.4 How to show the last received image 41
3.9.5 How to turn on or off monitor synchronization 42
3.9.6 How to lock the main menu 43
3.9.7 How to use power saving mode 44
3.9.8 How to select your type of keyboard 45
TABLE OF CONTENTS

4 | kvm-tec
3.9.9How to change the keyboard fallback mode 46
3.9.10 How to change keyboard hortcuts 47
3.9.11 How to close the Extender Settings menu 47
3.10 How to switch between different computers 48
3.11 How to share videos 49
4. Network Settings 51
4.1 How to access the Network Settings menu (Master View and 51
4.2 How to force disconnect or select a workstation from the
current connected devices 53
4.3 How to manage user details,rights and groups 55
4.4 How to view the status of all remote units 58
4.5 How to view the status of all local units 60
4.6 How to set up dual-head or multi-head systems 62
4.7 How to enable user groups and rights and login access 64
4.8 How to auto-connect to a free computer after an interruption 65
4.9 How to set up a private connection 66
4.10 How to enable the User-PC Binding mode 67
4.11 How to enable the disconnect on PC Power Down option 68
4.12 How to hide info display 69
4.13 How to reconnect on startup 70
TABLE OF CONTENTS

kvm-tec | 5
4.14 Video Sharing 70
4.15 How to set the password timeout 71
5. Maintenance and care 72
6. troubleshooting 72
6. Troubleshooting 73
7. Disposal 73
8. Warranty 74
9. Support 74
10. Declaration of Conformity 75
11.1 Requirements for CAT5e/6/7 cables 77
11. Requirements for cables 77
11.3 Requirements network switch 78
11.2 Requirements bER cables 78
11.2.1 Multi-Mode (standard) 78
11.2.2 Single-Mode (optional) 78
12. Requirements Network Switch 78
13. First Aid 80
14. Extended warranty 81
15. Notes 82
TABLE OF CONTENTS

6 | kvm-tec
1. INTRODUCTION
Congratulations on the purchase of your new Industryline MVXi/MVXi-F KVM Extender.
You have bought a high quality extender. These instructions are part of this product.
They contain important information regarding safety, use and disposal for every user
of the Industryline MVXi and MVXi-F KVM Extender. Please familiarise yourself with the
information within prior to using your product. Use the product only in the manner as
described and for the areas of application as stated. When passing the product to a third
party be sure to also supply all instructions and other relevant documentation. Following
proper use and maintenance, your Industryline MVXi/MVXi-F KVM Extender will bring
you joy for many years to come.
1.1 INTENDED USE
This product is intended to be used as a device to increase the distance that a keyboard,
monitor and mouse can be placed from a computer. This product is intended for professional
use. The product should not be used in potentially explosive environments.
The product may only be used according to the instructions as described in this manual. All
use, other than that described in this manual, is seen as unintended use. Modications in the
course of technological progress are reserved. In these user instructions the Industryline
MVXi/MVXi-F KVM Extender is referred to as ‘product’ or ‘extender‘. The MVXi/PC is referred to
as the ‘local unit’ and the MVXi/Monitor is referred to as the ‘remote unit‘.

kvm-tec | 7
1. INTRODUCTION
1.2 SAFETY INSTRUCTIONS
WARNING! Read and understand all safety instructions.
• Follow all the instructions. This will avoid accidents, re, explosions, electric shocks or
other hazards that may result in damage to property and/or severe or fatal injuries.
Please ensure that everyone who uses the product has read and followed these warnings
and instructions.
• Keep all safety information and instructions for future reference and pass them on to
subsequent users of the product.
• The manufacturer is not liable for cases of material damage or personal injury caused
by incorrect handling or non-compliance with the safety instructions. In such cases, the
warranty will be voided.
• This product is not intended for use by persons (including children) with restricted
physical, sensory or intellectual capability or lack of experience and/or knowledge, unless
they are supervised by a person who is responsible for their safety or provides them with
instructions on how to use the product.
• DANGER! Not for use in potentially explosive environments.
• DANGER! Be vigilant at all times, and always take care around this product. Do not use
electrical equipment if you are lacking in concentration or awareness, or are under the
inuence of drugs, alcohol or medication. Even a moment of inattentiveness can lead to
serious accidents and injuries when using electrical equipment. Check the product and
the cables for any damage before use. If there is any visible damage, a strong odour, or
excessive overheating of components unplug all the connections immediately and stop
using the product.
• DANGER! The MVXi-F KVM Extender is a Class 1 Laser Product 1 according to
DIN 40008/EN and VDE 0837.
• If the product is not installed and used in accordance with this manual, it may cause
disruptive interference with radio or television reception or affect other electronic
products in residential areas.
• Use shielded cables only to connect the components in order to avoid such interference.
Non-compliance invalidates the permission to operate this product.
• Only the mains adapter included with the product should be used as the power supply.
Do not use other adapters.
• Prior to connecting to the mains, make sure your local mains voltage matches the rating
indicated on the product.
• The product must be connected to a permanent and earthed AC wall socket.
1

8 | kvm-tec
1. INTRODUCTION
• Protect cables from being strained, pinched or buckled and place them in a way to
prevent people from tripping over the cord.
• In particular, ensure to avoid damage to the mains adapter.
• Use the product with a suitable, properly installed and easily accessible mains power
socket. Make sure the product can be disconnected from the power socket at all times.
• Unplug the product during electrical storms or when not in use.
• DANGER! Never touch the adapter with wet hands.
• Use the product within the specied performance limits.
• Keep the product away from ammable materials such as curtains and drapes.
• Protect the mains adapter from use by third parties (particularly children). Keep the
unused mains adapter in a dry, elevated or locked location away from children.
• Do not place the product near heaters.
• Do not drop or hit the product.
• Unplug all connections before cleaning the product. Do not use wipes or chemicals
as these could damage the surface. Wipe the housing with a damp cloth. Electrical/
electronic parts must not be cleaned.
• Alterations to the product and technical modications are not permitted.

kvm-tec | 9
1. INTRODUCTION
1.3 TECHNICAL SPECIFICATIONS
Type: KVM Extender (local unit and remote unit)
Model: Industryline MVXi/MVXi-F KVM Extender
Power supply input voltage: 100 - 240 V; 50/60 Hz AC
Power supply output: 12V; 1A (external power supply)
Power requirement: 6W per extender (excluding attached USB devices)
Operating temperature range: 0 ºC to 45 ºC / 32 °F to 113 °F
Storage temperature range: −25 ºC to 80 ºC / −13 °F to 176 °F
Relative humidity: max. 80% (non-condensing)
Storage humidity: max. 80% (non-condensing)
Casing Material: Anodized aluminium
Dimensions: approx. 97,5 x 41 x 103,5 mm / 3.83x 1.57 x 4.7 inch ”
Weight: local unit 302g/0.66lbs.
remote 291g/0.64lbs
Expected product life: 82 820 hours / 9.5 years
Laser MVX1-F: Class 1 Laser Product 1 according to DIN 40008/EN and
VDE 0837
1

10 | kvm-tec
1. INTRODUCTION
1.4 PRODUCT ELEMENTS
Local Extender (CPU)
Nr. Name Function
1 dvi-in DVI connection to PC
2 DC in Connection power supply 12-24V
3 kvm-link/ RJ45 socket Connection for CAT5/6/7 cable or bre cable
4 usb USB connection
5 gnd ground screw
6 dvi-out DVI connection to monitor
7 Power/Status LED Display the status of the Extender