Kygo E7/1000 User manual

USER
GUIDE
KYGO E7/1000
True Wireless Earphones
Kygo Life unites my love of music with modern Scandinavian
design. The aim is to develop top–quality audio equipment that
sounds amazing and looks great. Future classics that capture
the euphoric feeling of my music.
Like my approach to everything, Kygo Life is driven to
continually improve. So, as each product evolves it embraces
the latest technology and focuses on perfecting the details
until I’m absolutely happy the end result is the best it can be.
I hope that by creating new and inspiring audio experiences,
you’ll enjoy listening to your favourite tunes even more.
Getting Started
Congratulations on your new Kygo E7/1000 earphones! Before using this product,
you should read this manual and familiarize yourself with the Bluetooth functions
of your mobile phone or other devices.
Introduction
The Kygo E7/1000 earphones allows you to listen to your music wirelessly from
your mobile phone, tablet, or other Bluetooth® enabled device. It delivers
powerful and clear sound. The built-in microphone also allows you to answer
calls from your phone.
Precautions
Please refer to this Users’ Manual before using to ensure proper use. The
contents stated herein may be modified from time to time for better service as
the product properties and functions are subject to change without prior notice.
For the sound performances of the product, never use it in too cold, too hot, too
dusty or humid places, especially:
1. Near the heater or high temperature services or solarization.
2. In hazardous locations or in places apt to fall.
3. Never disassemble the combination audio.
Do not use any diluents or volatile liquids to clean your headset and make sure to
use only a charger from the qualified manufacturer.
In order to avoid electric shocks and product damage, do not attempt to
dismantle, repair or modify the product.
This product or its battery cannot be disposed with the household waste,
therefore it must be returned to a collection point to be recycled. Please check
with your local authorities for details.
Features
1. Bluetooth 5.0
2. Sound quality with AAC® codec
3. Waterproof (IPX 7)
FCC ID: 2ANOX69097

4. Microphone
5. Accessories included: Freebit sport wings,
Comply™ Foam ear tips and silicon tips
6. Voice command
Basic Buttons Operation
Status
Headset performance
The single pairing
headset (R)
After the headsets are paired with each
other, the indicator light
of the right headset will flash red and
blue. When the headsets are
paired with a device, the indicator light
flashes blue once every
five seconds.
True Wireless
pairing
After the headsets are paired with each
other (TWS pairing), the
indicator light of the right headset will
flash red and blue. When
the headsets are paired with a device, the
indicator light flashes
blue once every five seconds.
Standby Mode
The indicator light of the right headset
flashes blue once every
5 seconds
Call Mode
When in a call, the indicator light of the
right headset flashes red
every 5 seconds
Headset Charging
The indicator light of the headset is red

Mode
when being charged, and
will turn off automatically after being
fully charged
Charging Base
Charging Mode
The indicator lights of the charging base
flashes when being
charged, and four lights are on after being
fully charged
Power On State
The indicator light flashes blue for 3
times and then flashes red
once every 5 seconds.
Power Off State
The indicator light flashes red for three
times.
Low Voltage
Alarm State
The indicator light flashes red once every
20 seconds
Wearing guide
STEP 1
Remove the headset from the charging case and choose between the included
silicone or Comply™ Foam eartips and the Freebit sport wings included in the
package. We suggest you test the different sizes to find the one that fits your
ear best.
STEP 2:
Insert the headset in your ear and slightly rotate headset until it firm.
STEP 3:
Make sure the headset is placed properly into the ear before use.
General function
Switching on / off on
METHOD 1:
In OFF MODE, press and hold headset(R) and headset(L) MFB for 2 seconds
to turn on.
In ON MODE, press and hold headset(R) or headset(L) MFB for 5 seconds to
turn off.
METHOD 2:
Pick up the headsets from the charging base to turn on automatically. Put them
back to power off and charge the headset
True Wireless Pairing

Method 1: Pick up the two headsets from the charging base to power on and wait
for 10 seconds. The two headsets will now enter auto-pairing mode and connect
with each other after a few seconds. The headset (R) will blink red and blue and
prompt “pairing”. Then open the device’s Bluetooth configurations and select
“KYGO E7/900 – R”.
Method 2: On OFF state, press both MFB buttons for 2 seconds to power on and
wait for 10 seconds. The two headsets will now enter auto-pairing mode and
connect with each other after a few seconds. The headset (R) will blink red and
blue and prompt “pairing”. Then open the device’s Bluetooth configurations and
select “KYGO E7/900 – R”.
After the headset is successfully paired through method 1 or 2, the right headset
prompts “connected”.
The first time you pair with a new device the earbuds need to be positioned next by one another
before they can connect with eachother
Reconnect
Method 1: (if the headset was placed in the case without being turned off): Pick
up the headsets from the charging base to power on -> After a few seconds the
two headsets will automatically connect with each other -> the headset will pair
automatically with the most recently paired device within Bluetooth reach.
Method 2: (if the headset was turned off with the MFB before being put in the
case): Press and hold the MFB buttons for 2 seconds to power on -> After a
few seconds the two headsets will automatically connect with each other ->
the headset will pair automatically with the most recently paired device within
Bluetooth reach.
Note: When reconnecting the headset will prompt “connected”, “left channel”
and “right channel”. When it successfully connects to a device, the right headset
prompts “ connected”.
Adjusting the Volume
In call mode or music playing mode, short press MFB of headset(R) to increase
the volume; short press MFB of headset(L ) to reduce the volume.
Forward/Backward
In call mode or music playing mode;long press MFB of headset (R) for 2 seconds and release your
finger for going to next song.
Long press MFB of headset (L) for 2 second and release your finger for going to previous song.
Delete Pairing Records on the Headset
On OFFMODE state, press MFB button on both headset (L) and headset (R)
for 10 seconds (OFF MODE→ON MODE(2 seconds)→Delete pairing records (10
seconds), until hearing the Beep voice for 3 times, and the red/blue light flashes
twice at the same time.
Answering /Ending a Call Headset (R)

When call income, short press MFB of headset (R) or headset (L) to answer call;in
call mode, long press MFB of headset (R) or headset (L) for 2 seconds to end a
call.
Rejecting a call
Press and hold MFB of headset(R) or headset (L) for 2 seconds to reject the call,
the speaker prompts “beep” twice. Please note that this function only support
mobile phones with voice dialing function.
Music Pause/Playing
On standby mode, shortly press headset (R) or headset (L) to play music.
On music playing state, double click headset (R) to PAUSE music. Duoble click (R) again to play
music. But headset (L)cannot pause independently.
Voice Dialing
On standby mode or music playing state, double-click the secondary ear (L)
function key, which can be heard “Du”.
Please note that this function only support mobile phones with voice dialing
function.
Two-call
(Only support the mobile phone which has the function of handling two phones.)
When you are answering a call, there is another call coming :
1. Long press and hold MFB of headset(R) for 2 seconds to end
the current call and answer incoming call;
2. Short press MFB of headset(R) to hold the current call and
answer incoming call.
3. After the second implementation, short press MFB of
headset(R) to switch between two calls;
4. After the second implementation, long press MFB of
headset(R) for 2 seconds to end the current call, and long press
MFB of headset(R) for 2 seconds to end the other call.
Note: All the above operations have to respect the precondition that Phone
supported Bluetooth hands free profile V1.5 and Phones are running under call
holding function (Network services) from telecom.
Battery charging
Charging Ways of Headset
The indicator light of headset is red when being charged, and will turn
off automatically after being fully charged. Put the headset (L) (R) to the

corresponding position in the bottom of the charging base. The earbuds charge
automatically when placed in the base.
Charging Ways of Charging Base
Use the USB-C charging cable to charge. The indicator lights of the charging
base flashes when being charged, and four lights are on after being fully
charged. Use the USB- C cable to connect with computer.
Note 1: Check the charging device is suit to the headset or not.
Note 2: Use only the supplied USB-C charging cable to charge the headset. The
use of other equipment may harm the product and cause danger.
Note 3: Do not attempt to force open the built-in battery as this could damage
the headset
Note 4: A fully charged headset will lose its power automatically if left unused. It
is recommended to charge the headset each three months.
Note 5: Do not leave the headset in a too hot or too cold condition. This may
affect the headset’s operations although it is fully charged
Note 6: Do not dispose of the headset into fire or water.
Re-connecting to Bluetooth® devices
Every time the headphone is switched on, it will connect to the nearest and the
last connected device automatically.
When the headphone is in standby mode and doesn’t connect to any device,
short press the MFB button and it will connect to last connected device
automatically.
Troubleshooting
Faults
Reasons
Solutions
Cannot turn on
low battery
protection
Charging headsets for 2-3
hours
Can not turn on by picking
up the headset /No indicator
light when headset being
charged
Charging base low
battery protection
Charging both the headsets
and
charging base for 2-3 hours
No sounds after pairing
Wrong pairing
Pairing again
The two headsets TWS
pairing failure/TWS paired
successful but can not find
the headset(R)
Too many pairing
records
Delete pairing records
according to user manual.
Charging base without
indicator
light when charging
DC power supply
doesn’t output power
Check whether the USB-C
charging line is plugged
Turning off automatically
Low battery
Charging headset for 2-3 hours
Headsets without
indicator light when
The headsets couldn’t
being charged in
1)Checking headset charging
interface

charging
charging base
whether has touched to POGO
PIN of charging base and the
location
is correct or not.
2)Charging for charging base.
Headset echo
Volume is too loud or
environment is noisy
Adjust the volume at phone or
change a place
Noise in call
Environmental interference
caused or distance
between headset and
mobile is too far
Change a place or move to close
the
headset and mobile
Low voice of the
calling party
Wearing headset is
wrong
Adjusting wearing position of
headset
The headset reconnected
with mobile
phone after put back
to the charging base
The charging base
without power, the
headset will auto turn
on and paired
Charging for charging base
Left and right earbud
don’t connect with
each other.
Left earbud was paired
first.
Delete pairing record on
headset,
press MFB button for 10 sec.
Water resistance
The Kygo E7/1000 are waterproof under classification IPX7. This means that the
earbuds can tolerate 30 minutes submersed in water up to 1 m (3 feet). The
charging case is not waterproof and should not be in contact with water.
Kygo E7/1000 has been tested under controlled laboratory conditions with a rating
of IPX7 under IEC standard 60529. Waterproof are not permanent conditions and
resistance might decrease as a result of normal wear.
Do not attempt to charge a wet headset.
Liquid damage not covered under warranty.
Warning
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Specifications
Bluetooth Version: Bluetooth 5.0
Profiles Supported: HSP, HFP, A2DP, AVRCP SBC, AAC® CODEC
Operation Range: Up to 10 meters
Music Playing Time: Up to 6 hours
Charging Base Supply Power for
Headset Music, Play Time: Up to 18 hours
Frequency response (+-3dB): 20Hz-20kHz
Impedance: 16Ω±15%
Driver sensitivity: 116db/1kHz
Battery: 45mAH Li-polymer Battery
Charging Time of Headset: About 2 hours
Earphone dimensions: L19.5×W19.5×H26
Total Weight: 60g
* Battery life and charging time may vary, depending on the usage and device type.
Kit contents
True Wireless earphones Kygo E7/900
3 pairs of silicon tips
3 pairs of Freebit sport wings
1 pair of silicon ring
1 pair of Comply™ foam eartips
Charging case
USB- C charging cable
Usermanual

Warningsheet