Kyocera Ecosys P2235dw Instruction Manual

kyoceradocumentsolutions.us
Frequently Asked
Questions
ECOSYS P2235dw

ECOSYS M2040dw
2
Table of Contents
My P2235dw displays “Check toner/Low toner”. 3
How do I check the Toner Level on my P2235dw? 5
How do I access the Command Center RX webpage? 6
Where is the Serial Number located for the P2235dw? 7
How do I install the Windows Print Driver for my P2235dw? 7
My P2235dw has poor image quality 13
My P2235dw displays an error indication. 14
My P2035dw does not turn on. 15
My P2035dw has an indicator that a Paper Jam has occurred. 16
Setting the Connection by Using the Wi-Fi Setup Tool (Microsoft Windows)”. 23
When trying to access the Command Center web page on my P2235dw it states,
“incorrect login User Name or Password”. 31
How can I print onto “Special Media” such as Envelopes or Labels on my P2235dw? 32
Installing the Apple OS print driver. 35

ECOSYS M2040dw
3
My P2235dw displays “Check toner/Low toner”.
Check to ensure the toner is Genuine Kyocera Toner. You can do this by checking if the toner has the Kyocera
Hologram on the toner bottle.
1. Remove the toner container and shake it, re-install the toner container.

ECOSYS M2040dw
4
2. Make sure the front cover is closed all the way.
3. Make sure the toner is installed in the printer correctly.

ECOSYS M2040dw
5
How do I check the Toner Level on my P2235dw?
The toner gauge can be found on the printer Status Page.
Press the Go button for 4 seconds and release, a status page will be printed
Check Toner Gauges at the bottom of the page.

ECOSYS M2040dw
6
How do I access the Command Center RX webpage?
(Command Center is not available with USB Cable connected devices)
Print the Status Page to get the TCP IP address for the printer.
Press the [Menu] key > press the [▲] [▼] key to select [Report Print] > [►] key>select Print Status Page
Look for the heading of Network on left column of the printed Status Page.
Below Network look for IPv4.
Look for the IP Address on the third line down.
Open a Web Browser such as Internet Explorer then delete the text in the Address Field.
Key in the IP address obtained from the Status Page then press Enter.
The default login is
Username: Admin (capital A)
Password: Admin (capital A)

ECOSYS M2040dw
7
Where is the Serial Number located for the P2235dw?
Open the Multi-Purpose Tray to find the Serial Number.
It will be a white label that looks like a barcode.
Note: The serial # is also located in the upper right corner on the previously printed status page.
How do I install the Windows Print Driver for my
P2235dw?
Supported operating systems
+Windows 10
+Windows 8.1
+Windows Server 2019
+Windows Server 2016
+Windows Server 2012 R2
+Windows Server 2012
Note: If you install the driver in unsupported operating systems including Windows 7, Windows Server 2008 R2, and
Windows Server 2008, a security message appears. To proceed with the installation, allow the installer to make
changes to your computer. For more information on Microsoft Windows support policy, go to the Microsoft Support
website.
The KX Print Driver can be downloaded from:
https://www.kyoceradocumentsolutions.us/p2235dw
Once downloaded, double click on the exe file to start the installation. The driver installation files will extract to a
folder on the C drive.

ECOSYS M2040dw
8
When the extraction completes, The Kyocera Product Library will open.
Accept the License Agreement.

ECOSYS M2040dw
9
Acknowledge the Energy Star Compliance notification by clicking OK.
In the menu on the left select Express Install.

ECOSYS M2040dw
10
In Express mode, the installer will search the network and USB connections for any Kyocera devices.
Click on the printer to highlight it and click Install.

ECOSYS M2040dw
11
Select Yes to allow the driver to report issues to Kyocera in the event of an issue. If you do not wish to
allow the reporting, select No.
The Product Library will start installing the selected driver and components.

ECOSYS M2040dw
12
Once complete, select the check box to Print A Test Page.
Please note that for Energy Star Compliance, Duplex is enabled by default.

ECOSYS M2040dw
13
My P2235dw has poor image quality
To maintain quality, be sure to use genuine Kyocera toner.
The use of non-genuine toner containers may cause failure. A label is affixed to our genuine supplies, as shown
below.
1. Replace the paper with new paper.
2. Shake the toner container from side to side several times.
3. Disable Eco Print mode.
4. Make sure the paper type setting is correct for the paper being used.

ECOSYS M2040dw
14
My P2235dw displays an error indication.
If an error occurs on the machine, the error message appears on the screen. (Refer to Operation Guide for help with
troubleshooting).

ECOSYS M2040dw
15
My P2035dw does not turn on.
1. Make sure to fully press in the white main power button located on the lower right side of the front of the printer.
2. Check that the power cord that came with the printer is fully inserted in the rear of the unit.
3. Confirm the printer is plugged into a working outlet. Try plugging in another device to see if it powers on.
4. Try a different power cord if available.

ECOSYS M2040dw
16
My P2035dw has an indicator that a Paper Jam has
occurred.
Paper Jam at the MP Tray
1. Remove any jammed paper. Do not reuse jammed papers. If the paper tears during removal, be sure to remove
any loose scraps of paper from inside the machine. Scraps of paper left in the machine could cause subsequent
jamming.

ECOSYS M2040dw
17
2. Remove all the paper.
3. Reload the paper in Multipurpose tray.

ECOSYS M2040dw
18
Paper Jam at the Cassette 1
1. Pull Cassette 1 out toward you until it stops.
2. Remove any jammed paper. Do not reuse the jammed papers. If the paper tears during removal, be sure to
remove any loose scraps of paper from inside the machine. Scraps of paper left in the device could cause
subsequent jamming.

ECOSYS M2040dw
19
3. Push Cassette 1 back in.
Paper Jam at Rear Cover
1. Open the Rear Cover 1.

ECOSYS M2040dw
20
2. Remove any jammed paper. Do not reuse the jammed papers. If the paper tears during removal, be sure to
remove any loose scraps of paper from inside the machine. Scraps of paper left in the device could cause
subsequent jamming.
3. Open the feed cover (D).
4. Remove any jammed paper.