Kywoo3D Tycoon Max User manual

Tycoon Max
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

3
Notes
1. After unboxing, please check whether the machine is damaged, bent, or
scratched, and check the parts against your order. If you have any questions,
please promptly contact our after-sales service via the Kywoo 3D official website
or the email address provided on the manual.
2. Do not use the printer for anything other than described herein in order to avoid
personal injury or property damage.
3. Do not place the printer near any heat source or flammable or explosive objects.
We suggest placing it in a well-ventilated, low-dust environment.
4. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
5. Please use the recommended filaments to avoid the blockage of the extruder and
damage to the machine.
6. Do not use any other power cable except the one supplied. Always use a
grounded three-prong power outlet.
7. Do not touch the nozzle or printing surface during operation as they may be hot.
Keep hands away from machine while in use to avoid burns or personal injury.
8. Do not wear gloves or loose clothing when operating the printer. Such clothes
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
9. After printing, use the provided tools to clean up any filament on the nozzle while
it’s still hot. Do not touch the nozzle directly with your hands.
10. Clean the printer frequently. Always turn the power off when cleaning, and wipe
with a dry cloth to remove dust, adhered printing plastics or any other material
off the frame, guide rails and wheels. Use glass cleaner or isopropyl alcohol to
clean the print surface before every print for consistent results.
11. Children under 10 years of age should not use the printer without supervision.
12. This machine is equipped with a security protection mechanism. Do not manually
move the nozzle or printing platform while booting up, otherwise the device will
automatically power off for safety.
13. Users shall comply with related national and regional laws, regulations and
ethical codes where the equipment or prints produced by it are used, and users
of our product shall not use aforesaid products to print any end-use products,
objects, parts or components or any other physical prints that violate the national
or regional laws, regulations and ethical codes where herein referred product
and produced prints by it is located.

4
Introduction
Extruder Stepper
Handle
Extruder
Screw Rod
Feed-in Knob
Nozzle Kit
Coupling
Z-axis Motor
TF card Slot
Micro USB port
SD Card Slot
Touchscreen
Linear Rail
Y-axis Motor
Polished Rod
Hotbed
Y-axis Timing Belt
Rod Fixed Seat
Y-axis Endstop
Switch
Foot Leveling Mat

5
Parts List
Body
Base Frame
Filament Holder
Binder Clip
Power Cord
Tempered Glass
200g Filament
Tool list
Spad
TF Card & Card
Reader
Open-end
Wrench
Cable Tie
Limit Switch
0,4mm Nozzle
PTFE Tube
USB Cable
Nozzle Cleaner
Slotted Screwdriver
Foot Mat
Belt Tension Spring
M5x25mm Screw
Allen Wrench Set

6
Spad
TF Card & Card
Reader
Open-end
Wrench
Cable Tie
Limit Switch
0,4mm Nozzle
PTFE Tube
USB Cable
Nozzle Cleaner Slotted Screwdriver
Foot Mat
Belt Tension Spring
M5x25mm Screw
Allen Wrench Set
Parameters
Model
Tycoon Max
Printing Size
300*300*230mm
Molding Tech
FDM
Nozzle Number
1
Slice Thickness
0,1mm – 0,4mm
Nozzle Diameter
Standard 0,4mm
Precision
± 0,1mm
Filament
PLA/TOP/PETG/ABS/Wooden
File Format
STJ/OBJ/AMF/G Code
Working Mode
Micro USB/TF card/SD card/Wi-Fi
Slice Software
Cura/Repetier/Simplify3D
Power Supply
Input: AC 115/230V 50/60Hz
Output: DC 24 V
Total Power
350W
Bed Temp
≤110°C
Nozzle Temp
≤260°C
Resume Print
Yes
Filament Detector
Yes
Dual Z-axis
Yes
Auto levelling
Yes
Wi-Fi Printing
Yes
Octoprint
Yes, needs an additional accessory
Recommended Printing Speed
80-100mm/s
Operating System
Windows XP/7/8/10 Mac/Linux
Language Selection
Yes, supports nine languages
Supported Languages
1.Simplified Chinese; 2. Traditional Chinese; 3.
English; 4, Russian; 5. Spanish; 6 French; 7.
Italian; 8. German; 9.; Japanese

7
Assemble the 3D Printer
Install the Base
1. As shown in the picture 1a, pick up the base with the foot mat towards the front
and slide the base through the gantry frame from the front of the body. Next fix
the body and base together using four M5x25mm screws, as shown in picture 1b.
1a From the side of the body, with the
foot mat towards ahead
1b
2. Connect the cable with the Y-axis motor and connect the end-stop switch cable,
as shown in picture 2a and 2b.
2a
2b

8
3. Then connect the hotbed heating wire and thermistor wire, like in picture 3.
4. Install two-foot levelling pats as shown in picture 4, and adjust the height of the
foot levelling pats to make the printer stable or to the height that you need.
3
4
5. As shown in picture 5, fix the filament holder on the top profile, then tighten the
T-rod nuts of the holder.
5
Install the tempered Glass platform and Connect the power Cord
1. As shown in picture 1a and picture 1b, place the glass on the silver-white
platform and clamp it with the binder clips. Be careful not to clamp the hotbed
cable.

9
1a
1b
2. Select the proper input voltage to match your local mains (115/230V), 230V by
default. Damage may occur if the voltage is set incorrectly.
3. Connect the power cord and plug it in power supply. Turn the power switch to “I”
to turn on the printer, and "O" for off. Do not disconnect the cord when the
machine is powered on.
Tempered Glass
Binder Clip

10
Screen Interface
Ajust the temperature of nozzle/hotbed
Filament in/out of the extrusion
Move X/Y/Z Axis
Filament load/unload
Tools
Home X/Y/Z Axis
Settings
Connecting Wi-Fi
Change Language
Firmware version
Adjust the speed of the fan

11
Use the 3D Printer
Home and Auto-level the heated Bed
After the printer powered on, there are three options on the screen page. Select Tool-＞
Home-＞ALL, the printer automatically starts homing. After homing is finished, press
Back and select Auto-level. Wait for the printer to finish auto-levelling, and then you can
start to print. (Note: The printer needs to be auto-levelled whenever the nozzle or the
printing bed is exchanged.)
Hotbed temperature
Model prewiev
Printed time
Printing progress
The current heght of Z-axis
Nozzle temperature
Fan speed
Adjust the temperature
Adjust the speed of the fan
Adjust the printing speed
Adjust the offset of X/Y/Z axis
Printing-Option
Step 1
Step 2
Step 3
Step 4

12
Preheat
Note: The print preheating parameters can be set in the slicing software, or in Tools-＞
Preheat, and select Extrusion 1 or Hotbed to adjust those temperatures. For your
reference, the preheating standard of PLA filament: the nozzle temperature is 200℃and
the hotbed temperature is 50℃. You can directly choose the sliced model to print, or
choose the test model that comes with the storage card.
While waiting for the temperature to rise, you can place the filament on the filament
holder. For smoother printing, you can cut the end of the filament diagonally as shown
in the picture.

13
Load Filament
When the hotbed and nozzle reach their set temperatures, pass the filament through
the filament detector module, then insert into the extruder and the nozzle. When you
see the melted filament flow out from the nozzle, like the following picture, then the
filament is successfully loaded.
Tips: How to Replace the Filament?
1. Cut the old filament just above the extruder and slowly feed new filament in.
2. After the nozzle is preheated, push the old filament down a little way and
withdraw it quickly, then feed the new filament in.
Adjust Z-axis Offset
Insert the storage card→Print→Choose the “Auto-levelling Test” file. When printing the
first layer, look at how well the model attaches to the hotbed, and adjust the Z-offset
appropriately (when the filament cannot be attached to the printing platform well, click
Z- to lower the nozzle; Z+: when the nozzle is too close from the hotbed and the filament
cannot be extruded properly, click Z+ to raise the nozzle), until the model can be
relatively firmly attached on the hotbed, as shown in the following picture.

14
The nozzle is too far from the hotbed, click Z-
Perfect printing effect
The nozzle is too close from the hotbed, click Z+

15
Start printing
After adjusting the Z-axis offset, you can start printing a model. Click "Printing", choose
the file to be printed, and click "Confirm". (Note: If the nozzle distance to the hotbed is
found to be improper during printing, you can adjust the Z-axis offset again.)
Step 1
Step 2
Step 3

16
Filament Detection Function
When the filament accidentally disconnected or runs out during printing, the printer will
make a loud buzz to alert the user, and printing is paused. The filament detection
module is above the nozzle. The user needs to use the filament unload function to
withdraw the original filament, insert the new filament into the extruder, and then click
Resume on the screen to continue printing.
Normally Printing
Filament disconnected, the printer buzzes

17
The screen shows printing paused
Resume Printing: If power is interrupted during printing, the printer will prompt
whether to continue the print when the power supply is resumed.
Wi-Fi Printing: Please refer to the Wi-Fi instructions on the TF card.
Circuit Wiring
Shut down
after printing
Hotbed Thermistor
Filament
Detector
Power Detector
White
Black
Auto-level
Y-axis End-stop
X-axis End-stop
LCD Ribbon Cable
Extruder thermistor
TF Card Slot
USB Port
Power port (-)
Power Port (+)
Hotbed Heater (+)
Hotbed Heater (-)
Extruder Heater
Hot-end Cooling
Fan
Auto-level (2)
Red
Blue
Yellow
Part Cooling Fan
Y-axis Motor
X-axis Motor
Z-axis Motor
Extruder Motor (E)

18
Maintenance
Use only a soft, lint-free cloth for cleaning. Do not use aggressive or abrasive cleaners.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

19
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Kywoo3D, 3D printer
Model / Type: Tycoon Max
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 27.1.2021

20
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.