La Crosse Technology TX60U-IT User manual

Page | 4 Page | 1
Model: TX60U-IT
DC: 041218
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date
of purchase) on this product relating to manufacturing defects in materials &
workmanship. Before returning a product, please contact our friendly customer
support with questions or visit our online help:
Phone: [phone]
Online Product Support and Registration:
https://www.lacrossetechnology.com/support/lacrossealertsmobile/
WARRANTY AND SUPPORT
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to
this equipment. Such changes or modifications could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain
errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions.
We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
CONTENTS NOT INCLUDED
1. Sensor TX60U-IT
2. One Probe (wet, dry, threaded
or hot tub)
3. Screws & anchors
• High speed INTERNET service
and router to connect gateway
• Mobile device with cellular
or WiFi service to use app
• GW1000-U gateway, power
cord, and LAN cable
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google Inc.
Temperature/Humidity Add on
Sensor with Probe

Page | 2 Page | 3
SETUP
1. Check that your gateway has a solid
red light showing.
2. Insert 2 AAA batteries into sensor.
Observe correct polarity.
3. Optional: Insert Probe into sensor.
4. Download La Crosse Alerts Mobile App.
5. Follow the on screen instructions.
AAA
AAA
GATEWAY LIGHTS
4 BLINKS: Ready to register
3 BLINKS: Cannot find server
2 BLINKS: No IP address
1 BLINK: Check LAN cable
NO LIGHT: Check power cord
RED/GREEN LIGHTS BLINK:
Delete existing registration
SOLID RED: Registered
FACTORY RESET
Gateway:
1. Remove power cord
2. Hold gray button & insert power cord
3. Continue to hold until red light flashes twice. Release button.
4. When light flashes 4 times, register.
Sensor:
1. Hold gray button on sensor until sensor display resets.
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable
for intended use;
• Clean the battery contacts and also those of the device prior to
battery installation;
• Ensure the batteries have with correct polarity (+ / -)
• Remove batteries from equipment that will not to be used for an
extended period.
• Promptly remove expired batteries.
CARE AND MAINTENANCE
• Temperature: -40ºF to 140ºF (-40ºC to 50ºC)
• Humidity: 3% RH to 99% RH
• Optional Probe Temperature: -40ºF to 140ºF (-40ºC to 50ºC)
• Transmission: 200 ft. (60.96m) in open air
• Battery Requirements: Sensor: 2 “AAA” (LR3) battery (not included)
• Dimensions: 1.44” L x 0.76” W x 5.73” H (3.66 L x 1.93 W x 14.55 H cm)
System Requirements:
• iOS 8 or greater is required with a Safari browser
• Android 4.0.3 or greater is required with Chrome or Stock browser
Browser:
• Mac supported versions (min) OSX 10.8, 10.9 or 10.10 with Safari 6.1.1+,
Chrome 36+ or Firefox 39+
• Windows supported versions (min) 7/SP1, 8.1/Update 1, or 10 (Pro/Home)
with Chrome 36+, Firefox 39+ or Internet Explorer 10/11.
SPECIFICATIONS
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: www.P65Warnings.ca.gov
Setup Video: www.lacrossetechnology.com/support/lacrossealertsmobile/