La Crosse Technology Max X'treme K3-100 User manual

K3-100
Max X’treme
Instruction Manual

K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
temperature, barometer, altitude.)
pacer in a sleek water resistant case.
Store your La Crosse Technology K3-100 wrist watch in a dry
place when not in use
Mode Button
Select Button
and Current
Time Mode
[Select]
[Select]
[Select]
[Mode]
[Mode] [Mode]
[Mode]
[Mode][Mode]
Select

4.1
4.2
[Mode]
[Mode] [Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]

[mode] [mode]
K3-100
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
5
K3-100
K3-100
K3-100
61, 3, 5, 10, 15 and 45 Minutes.

[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
The pacer will generate beeps at a pre-defined beeping rate. The beeping rate can be set
from 30 to 180 beats per minute(BPM) in step of 5.
USING THE PACER
In current time mode, press [M] until PACER is displayed.
Press the [S/S] button to start the pacer.
The step counter “St” will run in the middle of the display (max 99999steps)
Press the [S/S] button to stop the pacer.
To reset the step counter, press and hold the [L/R] button when the pacer was stopped.
HOW TO SET THE BEEPING RATE
Press and hold the [M] button for 2 seconds in Pacer Mode.
When the beeping rate digits start to flash, press the [S/S] or [L/R] button to increase/
decrease the number. (Hold down the button to change the number at a higher speed).
When the setting is completed, press and hold the [M] button to exit the setting display.

9.0
10.0
[ Mode ] [ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
five (5)
[Select] button twice to enter the Barometer mode.
K3-100
three(3)
, Sea Level Pressure and History.

[Mode]
[Mode] [Mode]
K3-100
[ Mode ]
[ Mode ]
10.1
10.2
10.3
11.0
K3-100
K3-100
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Select ]
[ Select ] one to
K3-100

11.1
11.2
11.3
[ Mode ]
[ Mode ]
[ Mode ] [ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
K3-100
K3-100
K3-100
[ Mode ]
[ Mode ]
[ Mode ]
K3-100
[ Mode ]
[ Mode ]
[ Mode ] [ Mode ]
11.4
[Mode]
[Mode]
[ Mode ]
[ Mode ]
[ Mode ]

11.5
[ Mode ]
[ Mode ]
[ Mode ]
[Mode]
[Mode] [ Mode ]

K3-100
K3-100
6 Quick-Set-Values
(1, 3, 5, 10, 15, and 45 minutes)
-702m to 9164m
(-2306ft to 30065ft) Assuming sea
300 hPa/mbar to 1100hPa/mbar
(8.85 inHg to 32.48 inHg)
Up to 10m (30 feet)
5 seconds EL backlight operation per day