La Crosse Technology WT 280 User manual

INSTRUCTION MANUAL WT 280
FEATURES:
- Radio controlled clock
- Manual time setting
- 12-or 24-hour time display
- Calendar display
- Time zone (+/- 12 hours)
- Indoor temperature in °C/°F
- Alarm snooze function
- 5 languages selectable display in Day-of –week: German, English, Spanish, Italian and French
- Jumbo LCD
- Back-light
SETTING UP:
1. Firstly, open the battery cover at the back of the clock.
2. Checking the correct polarization, insert 2 x AA, LR06, 1.5V batteries into the compartment and
replace the cover.
3. When the batteries are inserted, the clock will be automatically scanning for the radio controlled
time signal.
4. If after 6 minutes the DCF time has not been received, you can manually set the time. (see chapter
manual time setting)
5. If the clock cannot receive the signal at the first time, it will automatically attempt to receive the
signal again one hour later.
6. The clock will automatically receive the signal everyday 2.00 am.
7.
MANUAL TIME SETTING:
In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this
situation, the time should be set manually.
1. Press and hold the TIME key for 3 seconds and the “hour” digits will start flashing, press ▲or ▼
key to adjust the hour.
2. Press the TIME key again and the “minute” digits will start flashing, press the ▲or ▼key to adjust
the minute.
3. Press the TIME key again and the “second” digits will start flashing, press the ▲or ▼key to clear
the “second” to 0.
4. Press the TIME key again and the “year” digits will start flashing, press ▲or ▼key to adjust the
year.
5. Press the TIME key again and the “dash” between “date” and “month” will start flashing, press ▲
or ▼key to shift the position of “date” and “month”.

6. Press the TIME key again and the “month” digits will start flashing, press the ▲or ▼key to adjust
the month.
7. Press the TIME key again and the “date” digits will start flashing, press the ▲or ▼key to adjust
the date.
8. Press the TIME key again and then press the ▲or ▼key to set the time zone, e.g. when the country
time is faster than DCF time for 1 hour, the zone should be set to +1.
9. Press the TIME key again and then press the ▲or ▼key to choose the language for the Day of
week.
10. Press the TIME key again to return to normal display.
ALARM SETTING:
1. Press the ALARM ON/OFF key.
2. Press and hold the ALARM key for 3 seconds and the “minute” digits of alarm time will start
flashing, press ▲or ▼key to adjust the minute.
3. Press the ALARM key again and the “hour” digits of alarm time will start flashing, press ▲or ▼
key to adjust the hour.
4. Press the ALARM key again to return to alarm time display.
5. Press the ALARM ON/OFF key once to activate alarm on function and twice to activate snooze
function. Press the ALARM ON/OFF key once more, the alarm on function will be inactivated.
6. Press TIME key to return to normal display mode.
FUNCTION KEYS
SNOOZE/LIGHT KEY
-When the snooze alarm beeps, press the SNOOZE/LIGHT key to pause the alarm for 5 minutes and the
snooze function can be used repeatedly.
To stop snooze function, just press other keys once.
-Press the SNOOZE/LIGHT key to illuminate the LCD for 3 seconds.
C/F KEY
-In normal time display, press the C/F key to toggle between Celsius and Fahrenheit temperature
readings.
12/24 KEY
-In normal time display, press the 12/24 key to toggle between 12h and 24h display.
WAVE KEY
-In normal time display, press and hold the WAVE key for 3 seconds to activate the DCF scanning
function.
-If the clock is scanning for the DCF signal, press the WAVE key for 3 seconds▲to inactivate the DCF
scanning function.

LIABILITY DISCLAIMER
• The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds
strongly damages the environment.
• Please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective collection.
• All electronic instruments must from now on be recycled. User shall take an active part in the reuse, recycling and recovery of the electrical
and electronic waste.
• The unrestricted disposal of electronic waste may do harm on public health and the quality of environment.
• As stated on the gift box and labeled on the product, reading the “User manual” is highly recommended for the benefit of the user. This product
must however not be thrown in general rubbish collection points.
• The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an
inaccurate reading take place.
• This product is designed for use in the home only as indication of the temperature.
• This product is not to be used for medical purposes or for public information.
• The specifications of this product may change without prior notice.
• This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.