La Crosse 404-2631 User manual

www.lacrosseclock/support
Instructions Manual:
404-2631
DC: 051916
Wall Clock with Temperature and Humidity
Setup
1. Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to the
polarity markings. The battery is a snug fit.
2. Rotate the Time Set Wheel to set the time.
3. Mount on the wall and enjoy!
Note: The quartz movement will keep the clock running accurately. If the
clock does not operate, or steadily loses time, replace the battery.
Frequently Asked Questions
Q. Can the temperature/humidity be adjusted?
A. Temperature and Humidity will self-adjust. They cannot be calibrated.
Q. How long will the battery last?
A.A good AA alkaline battery will last over 12 months.
Q: Will this clock provide times around the world?
A: The time is set manually. The clock may be set for any time around
the world.
Q: Why do the hands spin?
A: Hands may spin if the battery is under powered or over powered. Use
only Alkaline batteries in the clock.
Battery
Compartment
Time Set
Wheel
Features:
1.Accurate quartz movement
2.Fracture resistant lens
3.Metal hands
4.Temperature/humidity
5.Requires one (1) “AA”
battery (not included)

www.lacrosseclock/support
Limited Warranty
This product is warranted to be free from defects in material and
workmanship under normal use and service for a period of 2 years from
the date of sale to the customer. Warranty will not apply to defects
resulting from abuse, accidents, or misuse. If a defect that is covered by
this warranty arises during the warranty period, promptly return the clock
(postage prepaid) with proof of purchase showing the date the clock was
purchased to the following address and such defects will be repaired, or
the products will be replaced at La Crosse Clock Company option
without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
www.lacrosseclock.com/support
Specifications
Power Requirements: 1 AA LR6 Alkaline Battery
Battery Life: over 12 months
Temperature Range: -30°F to 130°F (-34°C to 54°C)
Humidity Range: 0%RH to 100%RH
Care and Maintenance
•Always purchase the correct size and grade of battery most suitable
for intended use.
•Clean the battery contacts and also those of the device prior to
battery installation.
•Ensure the battery is installed with correct polarity (+and -).
•Remove battery from equipment which is not to be used for an
extended period of time.
•Promptly remove expired battery.
•The specs of this wall clock may change without prior notice.
•Improper use or unauthorized opening of housing voids warranty.
Made in China – Printed in China